Časnikarstvo zavora

LAMI NOVA P 1340

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Screw diameter: 90 mm Ihsdpfxetunccs Af Tst Shot weight in polystyrene: 1,758 g/PS (g/polystyrene) Clamping force: 6,500 kN Machine weight approx.: 32 t From series production

Leto izdelave: 2011, Stanje: delavnici obnovljeno (rabljeno), Boschert Tool Grinding Machine EASY SHARP Equipped for the Trumpf tool system (Amada system optional) Machine for punch tool maintenance with cooling system and especially powerful motor, therefore also suitable for use with diamond grinding wheels. Used machine is currently being overhauled Equipment for Trumpf tool system up to size III Accessories: Tool holder for flat and Whisper punches Die holders for sizes I, II and III New corundum grinding wheel Dressing diamond Overhauled cooling system and machine base frame Technical data: Grinding wheel diameter: 175 mm Height adjustment: 150 mm Working area: 400 x 150 mm Motor power: 2.2 kW Motor speed: 2,825 rpm Ihjdpfsid I T Iex Af Tot Optional: adapters for Amada system available Pictures for reference only

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) Ihedpfxsfgyico Af Tot * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, 1 used injection moulding machine Manufacturer: ENGEL Model: VICTORY 200/28 TECH Year of manufacture: 2007 Clamping force: 28 tons Tie bar spacing: TIE-BARLESS Screw diameter: 25 mm Maximum shot volume: 49 cm³ Shot weight: 44 g/PS Control system: CC200 Equipment: Iodpfx Asu Eu Tnef Tsht - 1 x core pull

Stanje: rabljeno, Dolžina upogibanja: 3100 mm Tlak: 80 t Moč motorja: 5,5 kW Mehanska zadnja opora Ihjdpsru Unbofx Af Tjt

Stanje: novo, Leto izdelave: 2026, The ERBA Turbo 60 is a centrifugal finishing machine designed for deburring, smoothing, and polishing of small to medium-sized workpieces. The unit features a digital process timer, digital speed display, and a dosing pump (wet version). The plate speed can be adjusted via frequency inverter. The Turbo 60 is available in both dry and wet configurations. It can be seamlessly linked with the ERBA YE-60 separation section as shown in the images. Technical specifications: - Gross volume: 60 liters - Drive power: 3.0 kW Ijdpfen Ut Ilex Af Toht - Plate speed: 75 to 300 rpm - Optional equipment: tilting motor, sound insulating cover, or separation box All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may depict the system including optional accessories, which are available separately and may incur additional charges. If you are interested, we look forward to your inquiry. We will be happy to advise you, without obligation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves solely as an online presentation of our goods. Contract negotiations are conducted via telecommunication (email, phone, messaging portal). Our initial offer is non-binding and will include information on our general terms and conditions, imprint, and right of withdrawal, before any purchase/contract is concluded.

Stanje: zelo dobro (rabljeno), Leto proizvodnje: 1991 Model: ITPS III Iedpfx Afowq Dpqo Tjht Serijska številka: ITPS 80C 25 P1C226 Maksimalna stisna sila: 1800 kN Delovni hod: 115 mm Napajanje: 415 V, 50 Hz, 3 faze Nazivni tok: 119 A Vgrajena moč: 18,5 kW Teža stroja: 4940 kg Inventarna številka: 9.14 Krmiljenje: Delem DA-65R Stroj se vklopi, vendar krmiljenje ne reagira na ukaze. Prejšnji uporabnik je zamenjal originalno krmiljenje AMADA z DELEM.

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Mercodor shredder ZM 44 with a cutting chamber of 600x380 mm, equipped with a 7.5 kW drive. Knife configuration: 19 mm, 3 hooks. Ihjdjvupbzjpfx Af Tjt

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, Masina în stare excelentă! Specificație standard: - construcție din oțel sudat - 3 role de antrenare - poziționare pentru lucru orizontală și verticală - arbori realizați din oțeluri speciale îmbunătățite Ihsdpfxsr Ddurj Af Tjt - afișaj digital - pupitru de comandă portabil - manual de utilizare Echipamente opționale: Date tehnice: - diametrul arborelui: Ø100 mm - diametrul rolei: Ø315 mm - viteză de lucru: 7 m/min - putere motor: 7,5 kW - lungime mașină: 2000 mm - lățime mașină: 1450 mm - înălțime mașină: 1700 mm - greutate mașină: 3650 kg

Stanje: zelo dobro (rabljeno), The SB-10 grinding machine enables flawless grinding of boring bars, thread-cutting tools, parting-off tools, or boring bar steels made of HSS or carbide for jig boring machines or lathes. By selecting the correct rake angle to suit the respective material, you achieve optimum utilization and a longer service life of the tools. These boring bars are still mostly ground by hand today and are subsequently used on high-quality machine tools. On the SB-10, the steels are ground using a profiled grinding wheel at the circumference. The desired profile is achieved effortlessly with a dressing diamond and the template mounted on the machine. For excellent stability and surface quality, the horizontal carriage is mounted on cross-roller guideways. Grinding wheel (ØxWxB): 125 x 20 x 20 mm Iodpsfqicxefx Af Toht Speed: 2800 rpm Longitudinal adjustment: 130 mm Transverse adjustment: 80 mm Height adjustment: 65 mm Rake angle: +25° to -10° Dimensions (W x D x H): approx. 550 x 450 x 650 mm Weight: approx. 70 kg