Brusilni stroji Löwer FA 4 S

Löwer FA 4 S

Stanje: rabljeno, Thread Rolling Machine - Thread Rolling Machine ORT RP18 2-Roll Shaft diameter: 69.95 mm Kjdpfot Apugex Adksww See video The machine is located in our warehouse in Gussago (BS), powered on Test run possible Mimu Werkzeugmaschinen Rolling is a mechanical process without chip removal, which can be performed either cold or hot, aimed at improving the surface finish (and consequently the fatigue performance).

Stanje: rabljeno, Length 2700 mm Width 1100 mm Height 850 ± 150 mm Motor power 0.37 kW Electrical power 0.5 kW Compressed air 6 bar Horizontal impregnation unit 'Pro flow' for individual parts with rinsing circuit. ----- Functional features: Machine for horizontal flooding of individual workpieces. The product is applied by a row of nozzles. Excess product is then blown off by air nozzles. The pump and air nozzles are automatically controlled and only operate when a workpiece passes through. This helps to reduce compressed air consumption. The recirculation mode ensures minimal product consumption. ----- Construction features: Structure Robust steel frame, coated with high-strength, water-soluble paint. Machine body made of hot-sealed, thick polypropylene panels. Kwjdpfx Adjnl Nqqekew Four independent chambers for entry, flooding, air-blow, and exit. Horizontal feed of workpieces By means of motor-driven plastic rollers with grooves. Electronic frequency inverter for controlling and varying feed speed. Transmission The machine is fitted with an exclusive system whereby all gear mechanisms are located outside the flooding chamber and are easily accessible for the operator, guaranteeing longer operational life and facilitating maintenance. Moving parts are protected by cover plates and appropriate seals. Recirculation pump Pneumatic double-diaphragm pump with valves, seals, and diaphragms made from nitrile rubber, and a housing made of plastic material (PVDF). Air nozzles A blow-off system is installed in the first chamber to prevent product from escaping. A second blow-off system after the flooding chamber removes excess product from the workpiece. Electrical control panel According to CE, protection class IP 55. Includes inverter for adjusting feed speed. Technical data Length mm 2700 Width mm 1100 Feed speed (min./max.) m/min 3-6 Drive group motor power kW 0.37 Installed electrical power kW 0.5 Distance between entry and exit rollers mm 2520 Working height (adjustable) mm 850 ± 150 Min. length of workpieces to be flooded mm 250 Max. width of workpieces to be flooded mm 300 Max. height of workpieces to be flooded mm 250 Compressed air consumption l/min 2000 Required compressed air pressure bar 6 Equipment and included accessories Rinsing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical data according to manufacturer – without guarantee! Illustrations may differ from original. Prices net, plus VAT (domestic))

Stanje: novo, Leto izdelave: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units, individually adjustable 1st unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 2nd unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive 4th unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive Height adjustment: electric Height display: digital Control system: touchscreen Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Machine length: Machine width: Weight: Kwedpeug Ty Hefx Adkjw

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from above/below Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Exceptionally robust top model featuring innovative design details. Suitable for heavy-duty continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for rough sanding, fine sanding, and finishing, from both above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and pad 3. Finishing unit with fibre brush (see special equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads providing excellent thermal conductivity and absolute dimensional stability - Independent cooling of sanding zones for cooler sanding results and extended abrasive belt life - Positively guided, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Ambient dust extraction at tension rollers - Integrated brushing and finishing device with large-volume dust extraction - Motorized sanding thickness adjustment via precision leadscrews and oversized linear ball bearing systems, mounted on hardened, ground precision shafts with dust and dirt protection - Adjustment of material removal below via precision leadscrew with scale ring for measurement display (resolution 0.1mm) - Sanding belt tensioning by pneumatic cylinder with constant clamping force - Quick sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking for sanding belt replacement Kodpfjvu Hgbex Adkoww - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for over-thick workpieces - Workpiece transport via calibrated, slip- and grip-resistant conveyor belts over heavy cast iron tables with finely planed surface, and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, uniform workpiece feed - Feed gear motor with stepless speed adjustment 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with Softdisc: 2,740 mm), 2,600 mm - Length with control panel (with Softdisc: 3,035 mm), 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE-compliant design Equipped with the following options: - Sanding belt air blast system (4-belt) via nozzles directly at the radii ...

Stanje: rabljeno, Crosscut Saw 3 kW Spindle Diameter: 50 mm Spindle Length: 300 mm Number of Tool Sets: Variable Control: CNC Dimensions (L x W x H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Groove Cutting Machine FZS-2 Electronic with Continuously Adjustable Grooving Spindles and Automatic Roller Table ----- Crosscut Saw ----- Spindle Arrangement: Top Three-Phase Motor: 3 kW Spindle Diameter: 30 mm Speed: 2800 rpm Saw Blade Diameter: 400 mm Kwodpfxewgwlke Adkew * Automatic brake with speed monitoring * Infinitely variable saw positioning with Siko display * Safety and extraction hood with 100 mm extraction port 2 Grooving Spindles, 50 mm Diameter ----- Power: 2 x 7.5 kW Speed: 4200 rpm Spindle Diameter: 50 mm Tool Diameter: approx. 360 mm Usable Length: 300 mm * Both grooving spindles positionable via ball screw * Fully programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm extraction port * Automatic brake with speed monitoring Swing Table ----- * Swivel range: +/- 65° * Automatically changing backstop (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Backstop positioned in the cutting plane at every angle setting Special Equipment ----- Continuously variable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2500 mm Extraction Port Diameter: 2 x 180 mm for grooving spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine on request! ----- Images show an identical model. Original photos currently unavailable. (Technical data according to manufacturer – subject to change!) All prices stated are net. VAT to be added as per statutory rate.

Stanje: pripravljen za uporabo (rabljen), Panel length: 3200 mm, panel width: 1000 mm, max. workpiece thickness: 38 mm, min. infeed length: 500 mm. Kedpfx Aom Habdsdkjww

Stanje: zelo dobro (rabljeno), Self-loading press for laminated boards Orma LS/ECO/CA 30/13 Working length: 3000 mm Working width: 1300 mm Automatic material loading Glue application system Shelves heated with oil up to 130°C Kwedpfx Adjv Nhx Ueksw Upper pressing force: 57 t Side pressing force: 9 t Year of manufacture: 2001 CE certificate

Stanje: novo, Leto izdelave: 2026, Working width 4500 mm Working height 3000 mm Number of pressing cylinders 6 pcs. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S Frame Press Bavaria 2000 L, Year 2026 ----- AVAILABLE AT SHORT NOTICE from stock Engelfried, 73447 Oberkochen! INNOVATION for Holz-Handwerk 2026 in Nuremberg: Now also with semi-automatic positioning of the vertical pressing cylinders 1, 2 and 3 via enabling button, incl. selector switch ON/OFF for beam 2 With automatic pressing cycle + manual control for corner joints (tenon & mortise and dowel joint/mortised tenon), switchable via selector switch on the control cabinet. Comes standard ready for optional use of counter profiles if sashes are folded on the loose part. CE version Base machine in heavy-duty welded frame construction with thick-walled special hollow profiles. Guide rails for pressing beams at the press corners in wear-resistant, machined design. Kwodpfx Adjwg Hr Tjkjw Fast, smooth, manual width adjustment via ball-bearing mounted carriage; fixable in 50 mm grid, optionally motorized width adjustment with hydraulic clamping (at extra charge). Height adjustment and pressing by long-stroke cylinders in one operating cycle. Right press corners with integrated horizontal cylinders, thus no vertical positioning of horizontal pressing cylinders necessary, preventing cylinder collisions. Lower abutment adjustable to optimal insertion height in several positions. 3 kW compact hydraulic unit with integrated control block, variable pressure regulation 20-120 bar, pressure gauge. Control via pushbutton with separate circuits for vertical and horizontal pressing cylinders, mounted on mobile operating desk. 2 vertical double-acting pressing cylinders, stroke adjusted to working height, piston diameter 60 mm, max. pressure per cylinder 2100 kg 2 horizontal double-acting pressing cylinders, 80 mm stroke, piston diameter 40 mm, max. pressure per cylinder 1250 kg Abutment and pressure plate depth 100 mm Control cabinet at the left foot of the machine, 400 V, 50 Hz Machine supplied with ready-to-connect 16 A plug Paintwork: RAL 7035 light grey with RAL 7016 anthracite grey Working size: length x height = 4,500 mm x 2,750 mm Note: actual working size 4,500 x 3,000 mm (L x H) Required space: 5,600 mm x 1,400 mm x 3,550 mm (L x W x H) Article: Medium pressure beam complete with pressing cylinder, pressure hose and shut-off valve up to 2,750 mm height Note: actual working height: 3,000 mm Article: Single-pressure regulation for medium pressure beam, adjustable up to max. 100 bar (for pressing cross-bar windows) Article: Continuously height-adjustable cross-pressure device, complete with pressing cylinder and abutment, throttle and shut-off valve Article: Single-pressure regulation for cross-pressure device, adjustable up to max. 100 bar (for pressing cross-bar windows) Article: Shut-off valve at the 3rd vertical cylinder Article: Shut-off valve at the upper horizontal cylinder Article: Shut-off valve at the lower horizontal cylinder

Stanje: generalkompletno obnovljen (rabljeno), Thread rolling machine - Thread rolling machine ORT RP18 2-roll Refurbished - new Siemens PLC See video The machine is in our warehouse in Gussago BS, under power Kodpovxa Dbjfx Adkoww Test run possible Mimu Werkzeugmaschinen Rolling is a mechanical process without chip removal that can be performed cold or hot, with the purpose of improving surface finish (and thereby fatigue performance).

Stanje: rabljeno, Thread rolling machine - ORT RP18 2-roll thread rolling machine Swiveling spindle Kodeuua H Rspfx Adkeww Overhauled with Siemens PLC See video The machine is powered and available in our warehouse Test run possible