Stolpni vrtljivi žerjav, izhod 2,1 m / 1000 kg

KWG/SWF SSK-B 1,0-2,10

Stanje: dober (rabljeno), Leto izdelave: 1997, TBT ML 200-2-850 Deep Hole Drilling Machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drilling slide stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Plunge spindle: 120 mm Sealing housing: 400 mm Sealing housing with steady rest: 350 mm Hnjdpfx Agovca Rcsiok Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed – self-driven Feed rate: 20 – 500 mm/min Rapid traverse NC operation: 12 m/min Feed force: 1.5 kN Motor torque: 2.2 Nm at 3000 rpm Tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Max. stroke: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control system: Sinumerik 805 M No guarantee is provided regarding the accuracy, completeness, or currency of the information given.

Stanje: dober (rabljeno), Leto izdelave: 2016, Größe des Tisches: 3000 x 1700 mm Verfahrwege (X/Y/Z): 3200 x 2100 x 920 mm Tischbelastung: 11.000 kg Abstand Spindelnase – Tisch: 164 – 1084 mm Spindelaufnahme: DIN 50 Hsdpowu Dlajfx Agisnk Spindeldrehzahl: 6.000 min⁻¹ (U/min) Werkzeugwechsler: 40 Stationen (ATC) Steuerung: Hurco Winmax 5 Späneförderer

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,5 kW (25,15 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, kapaciteta rezervoarja za gorivo: 50 l, barva: rdeča, skupna masa: 2.600 kg, lastna masa: 2.500 kg, dvižna moč: 1.000 kg/m, dvižna višina: 3.310 mm, stanje pnevmatik: 100 odstotek, konfiguracija osi: 2 osi, število sedežev: 1, prostornina žlice: 0,4 m³, širina izkopne žlice: 160 mm, Leto izdelave: 2025, nosilnost: 980 kg, Oprema: dodatne luči, hidravlika, kabina, nastavljiva roka, pogon na vsa štiri kolesa, spojka prikolice, standardna žlica, vilice za palete, zapora diferenciala, zaščita za glavo, The H&R 2210-T telescopic loader with the new 3-cylinder Perkins turbo engine (18.5 kW, Mannheim, Germany) meets the Euro 5 emissions standard, even without a particulate filter. The new turbo engine is particularly fuel efficient, and with its 2-stage hydrostatic drive, it achieves a speed of approx. 16 km/h. Thanks to the large steering angle of 42° and a tight turning radius, it is highly maneuverable even in the smallest spaces. The 2210T wheel loader with telescopic arm comes standard with a quick coupler, pallet forks, and a standard bucket, allowing you to begin work immediately. With the additional hydraulic control circuit, various attachments for the yard loader can be used. The telescopic arm provides the 2210-T with excellent reach. The electric gear function on the joystick makes operating the H&R 2210T especially comfortable. H&R loaders are technically and visually optimized in-house and undergo comprehensive inspection and testing. In addition, every machine receives extensive corrosion protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. For our machines, a TÜV Süd technical report is available for obtaining an individual road operation permit in accordance with §21 StVZO (road registration / operating permit as a self-propelled work machine). Advantages of the H&R 2210T Telehandler: • Fully equipped • Efficient German-made engine (Euro 5) • Extensively optimized in-house • Extendable telescopic arm • Heated comfort cab • Includes pallet fork • Includes standard bucket (150 cm) • Joystick with float position and electric gear • Additional hydraulics for front attachments • Hydraulic oil cooler • Brake inching pedal • Reversing camera with display • Rotating beacon • LED work lights front and rear • Wide tires 31 x 15.5 -15 • Radio with MP3 and USB • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer hitch • 1-year spare parts warranty • CE compliant according to the EU Machinery Directive Price: Net: €24,975.00 VAT: €4,745.25 Gross: €29,720.25 Financing available! Options: 2-year warranty: €590 TÜV road registration / operating permit (work machine): €595 Hnjdpoul Af Dofx Agijk Transport within Germany & Austria upon request Technical Data: Engine: 3-cylinder Perkins turbo Power: 25 HP Emission class: Euro 5 Lifting capacity: 980 kg Lifting height: 3,310 mm (lower edge, standard pallet fork) Dumping height: 2,796 mm (lower edge, standard bucket tipped) Lift/lowering time: 4.0 / 3.5 seconds Wheelbase: 1.6 m Dimensions (L x W x H): 3,710 x 1,496 x 2,340 mm Weight: 2,430 kg Tires: 31 x 15.5 -15 Accessories and spare parts are available from us. Please include your phone number with inquiries!

Stanje: rabljeno, Leto izdelave: 2006, Full Bore Diameter / mm Drilling Depth / mm Number of Spindles / 2-Machine Package: Froriep Deep Hole Drilling Machine & Irle Finishing Machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces For sale is a specialized machine package – two perfectly coordinated units for the complete machining of long, heavy workpieces that demand maximum precision and efficiency. Hsdpfxouddime Agionk MACHINE 1 Froriep CNC Deep Hole Drilling Machine – The Pre-Machining Specialist Year of manufacture: 2006 Control: Siemens Sinumerik 840D Max. Drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Max. swing over bed: 1,000 mm Chuck clamping diameter: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steady rest MACHINE 2 Irle Machine – High-Precision Finishing Power: 129 kW Control: Siemens NC Control Speed range: 2 – 300 rpm (stepless) Feed rate: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing over bed: 1,250 mm Steady rest clamping range: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outside diameter: 850 mm With up to 50,000 Nm torque perfectly suited for smooth boring, honing, and demanding finishing processes. Your advantages at a glance: - Complete solution from a single source – from pre-drilling to final machining - Large workpieces up to 11 meters and 10 tonnes - High process reliability thanks to perfectly synchronized machines - Immediately available, well-maintained, and in operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics, and large-part manufacturing

Leto izdelave: 1981, stanje: zelo dobro (rabljeno), Obročno ploščo premer 1300 mm maksimalni premer struženja 1100 mm Hnsdpok Dz N Ijfx Agiek obseg premera struženja 460–1250 mm

Stanje: rabljeno, Leto izdelave: 1965, Core drilling diameter - max. 50 mm Drilling depth 2000 mm Swing diameter mm Drilling diameter max. 110 mm Total power requirement 30 kW Machine weight approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling Ø - Solid drilling approx. 2 - 50 mm - Boring out approx. 100 mm Hnodpfjt Hwucox Agijk Drilling depth max. 1,600/possibly up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage approx. 4,000 mm Distance between the two spindle heads 5,000 mm Center height above guideway 350/450 mm Feed rate of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt pulley: 260 - 650/650-1625 RPM Main spindle drive 24 kW Coolant pump drives: 1 x 7.5/15 kW - 1 x 15/28 kW Total drive approx. 60 kW 380 V - 50 Hz Total length of machine/guideways 7500/5000 mm Total weight approx. 10,000 kg Accessories / Special equipment: "Machine consists of the following elements: The main spindle on the left, followed by a BOZA, table group driven by ball screw spindle, BOZA with increased center height, and at the end a spindle head of the B 16 series with drive motor approx. 7.5 kW n = 900/2400 and 2400/6000; very large and elaborate coolant system with filtration unit, extensive accessories and drilling tools up to 100 mm Ø. " Suitable for rotating workpiece/fixed drilling tool/ELB and BTA processes, as well as for stationary workpiece and rotating drilling tool. Can operate with internal oil supply (ELB) as well as external oil supply (BTA). " Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate/min = 17/40/120 or 220/500 l/min. Capacity approx. 2,500 l. " Feed of the main carriage via ball screw spindle and steplessly controllable DC motor; currently, a cross-adjustable table approx. 500 mm, size approx. 800 x 800 mm, is mounted for clamping cubic and cylindrical workpieces. Electrical control via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return. " 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø, " Modernized control panel with speed display, feed setting and display, kW display, feed/rapid traverse switch (forward/reverse), etc. " 2 separate control cabinets, separate BOZA, sleeves, reducers, clamping aids, etc. Condition: good - soon ready for demonstration, machine is very valuable due to accessories Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice Further deep hole drilling machines constantly in stock - please contact us.

Stanje: novo, Turning diameter: 325 mm Turning length: 1000 mm Swing diameter over cross slide: 250 mm Swing diameter in bed gap: 440 mm Speeds: 12 (85-2000) rpm Tailstock MT 3 Quill stroke: 100 mm Quill diameter: 40 mm Spindle mount: DIN 55027 No. 5 Spindle bore: 32 mm Longitudinal feed: 0.006 - 1.77 m/min Cross feed: 0.003 - 0.885 m/min Total power requirement: 2.2 kW Machine weight approx.: 770 kg Space requirement approx.: 2150 x 950 x 1350 mm Equipment: - Coolant system - Machine lamp - Chip guard rear wall - Spindle guard - Chuck guard - Tool holder guard - Change gears Hnjdpjtycpasfx Agijk *Special equipment: - 3-jaw chuck Ø 160 mm Type 3204/ DIN6350, BISON - MULTIFIX quick-change tool post Type A, incl. 4 tool holders - 2-axis digital readout DRO Newall - Foot pedal with brake function CE

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Pressure: 25 tons Outreach: 160 mm Installation height: 500 mm Table surface: 650 x 650 mm Hjdpfx Agjfcw Apsionk Ram surface (round): 140 mm Stroke: 130 mm Power requirement: 4 kW Weight: 2,000 kg Height: 2,100 mm Width: 1,100 mm Depth: 1,500 mm

Stanje: novo, Load capacity in kg: 1000 kg Reach: 4000 mm Height: 3000 mm (underside of jib) Total column height: 3790 mm Slewing range: 270 degrees Total weight: approx. 525 kg Description: - Festoon cable power supply for trolley - Drag chain, cable sag approx. 800 mm - Operation from floor using pendant control Including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, double-strand - Painted in RAL 5017 traffic blue - Lifting capacity 1 t - Hook travel 3000 mm - Maximum hook position 2442 mm - Design basis FEM 9.901 - Mechanism group 2m / M5 - Lifting, 2-speed (pole-switchable) 1.3 / 5 m/min - Lifting power 0.22 / 0.9 kW Hedpfx Asxak Hxjgienk - Duty cycle 60% ED - Switching frequency 360 c/h Overload protection The crane system complies with the requirements of Machinery Directive 2006/42/EC as well as current UVV regulations DGUV Regulation 52 (formerly BGV D6). Included: - Anchor rods L200 (set) size LS 200 - Consisting of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - For foundation anchoring, including grouting accessories For alignment of the slewing jib crane, a mounting gap between the column base and the building floor must be provided. The mounting gap is to be grouted by the customer after approx. 4 weeks of crane operation. Illustration shows a similar crane system.

Stanje: rabljeno, Technical Details: Saw blade diameter: 250 mm Grinding wheel bore: Ø 25 mm Feed - manual: by hand Cutting height: max. 70 mm Hnodpfx Agju Nif Teiok Power supply: 8.5A / 50Hz / 220V (A/Hz/V) Table size: L:520 x W:500 mm Machine dimensions approx. LxWxH: 0.6 x 0.6 x 0.9 m Sale at asking price as a source of spare parts. Machine is currently non-functional, does not comply with UVV (accident prevention regulations). Application: Circular saw for wood