Rezkalni stroj

Kunzmann WF4/3

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control Very good CONDITION CE-compliant! Technical Data: >> Year of manufacture: 2003 Machine No.: 344174 >> Fixed angle table >> Infinitely variable spindle speed up to 4,000 rpm >> Infinitely variable feed on 3 axes from 0 to 2,000 mm/min >> Travel (X/Y/Z): 400/320/400 mm >> Table area: 650 x 350 mm >> Table load: 250 kg >> Vertical quill travel: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic drawbar system >> Weight approx. 1,800 kg >> Required floor space approx. 2.3 x 2 x 2 m >> Drive power: 12 KVA Accessories and Features: >> Heidenhain TNC 124 control >> Hydraulic clamping vertically and horizontally >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control unit manual, and programming examples >> Handwheels >> Coolant system >> Heidenhain electronic handwheel About the Machine: Dedpfjx Elxpex Aa Hswf Offered here is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 124 control unit. This universal milling machine is in very good condition. It comes from a facility where it was used only minimally for training purposes. The control unit is very easy to operate. The machine features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal milling is very straightforward due to the swiveling vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power on site. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Orodje za rezkanje utorov, igla za rezkanje utorov, specialno orodje, orodje za izdelavo utorov, stroj za izvlačenje utorov, stroj za vtiskovanje utorov, orodje za vtiskovanje utorov, vtisna igla za vtiskovanje utorov Dwjdpjitt Ryofx Aa Hsf -Proizvajalec: SWZ, vtisna igla za vtiskovanje utorov -Tip: B 6 J9x1,8 RL 24-72 mm -Kataloška št.: 45 0014 -Širina: 6 mm -Količina: 2x igli za rezkanje utorov na voljo -Cena: na kos -Gabaritna dimenzija: 900/6/H13 mm -Teža: 0,5 kg/kos.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Splošni podatki Dwsdpfsx D Er Rsx Aa Hof Širina: 2000 mm Globina: 2000 mm Višina: 2000 mm Premiki Premik po osi X: 400 mm Premik po osi Y: 320 mm Premik po osi Z: 400 mm Orodja Tip držala orodja: SK40 Univerzalni rezkalni stroj KUNZMANN WF4/3 je bil izdelan leta 1998. Ima vpenjalno površino 650 x 350 mm, maksimalno nosilnost 250 kg in držalo orodja SK40. Hitrost se giblje od 40 do 2500 vrt/min, z hodom pinole 60 mm. Stroj vključuje krmilno omaro in tehta približno 1300 kg. Idealen je za natančne rezkalne aplikacije. Za več informacij o tem stroju nas kontaktirajte. Vrste uporabe Rezkanje

Stanje: rabljeno, Leto izdelave: 1995, - Heidenhain digital position display - Infinitely variable feed on all axes - Rapid traverse on all axes - Hydraulic tool clamping system - Rigid angular table - Electrical central lubrication system - Coolant system Dedevhfqrjpfx Aa Hjwf - Workplace lighting - Machine feet - Year of manufacture: 1995 Specifications Milling Table: - Clamping surface: 650 x 350 mm - T-slots: 5 - T-slot width: 14 H7 mm - T-slot spacing: 63 mm - Max. load: 250 kg Working Area: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. Distances: - Table top to horizontal spindle centre: 140 – 540 mm - Table top to bottom edge of vertical head max.: 430 mm Milling Spindle: - Tool holder: SK40 - Speeds vertical/horizontal: 40 – 2550 rpm - Gear stages: 2 - Quill stroke vertical: 60 mm - Vertical head swivel range (both sides): 90° Feeds: - Longitudinal & cross feed: 0 – 1000 mm/min - Longitudinal & cross rapid traverse: 4000 mm/min - Vertical feed: 0 – 1000 mm/min - Vertical rapid traverse: 3000 mm/min General Data: - Drive power: 3 kW / 1410 rpm - Dimensions (W x H x D): approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg

Stanje: rabljeno, Broaching tool, broach, special tool, keyway tool, keyway broaching machine, keyway slotting machine, keyway broaching tool, slotting broach -Manufacturer: Planeta Coswig, broach/slotting broach -Type: 16D11x2.7 34-120inSt 34-165inGG -Width: 16 mm -Quantity: 1 piece available Dodpfeitt Saox Aa Howf -Overall dimensions: 1250/16/H30 mm -Weight: 4.2 kg

Stanje: rabljeno, Universal NC milling machine KUNZMANN Type WF 3/4 Machine No. 341020 Year of manufacture 1998 Travel paths X: 400 mm, Y: 320 mm, Z: 400 mm Table size 650 x 350 mm Spindle taper SK 40 Spindle speed 40 - 2500 rpm Dodpfxjlvyrbj Aa Howf Feed rates X, Y, and Z axes stepless from 0 - 1000 mm/min Rapid traverse X, Y axes 4000 mm/min Rapid traverse Z axis 3000 mm/min Quill adjustment vertical 60 mm Spindle motor power 3 kW Mains connection 400 Volt, 50 Hz - CNC path control Heidenhain TNC 124 - Spindle speed in 2 gear ranges and stepless via electronically controlled variator gearbox - Vertical milling head swivels +/- 90° - Hydraulic tool clamping - Fixed angle table - Control cabinet attached to the machine - Coolant tank with pump positioned alongside - Central lubrication - Lighting Required space (L x W x H): 1800 x 1800 x 1900 mm Weight: 1300 kg Good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 400 mm, pomik osi Y: 350 mm, pomik po osi Z: 300 mm, največja hitrost vretena: 4.500 obr/min, hitrost vretena (min.): 1 obr/min, poteza s peresom: 60 mm, skupna višina: 2.100 mm, skupna širina: 2.100 mm, skupna dolžina: 2.300 mm, širina mize: 450 mm, dolžina mize: 750 mm, največja hitrost vrtenja: 4.500 obr/min, vrtljajska hitrost (min.): 1 obr/min, skupna masa: 1.900 kg, teža obdelovanca (maks.): 500 kg, Traverse paths X/Y/Z 400/350/300 mm, spindle speeds 1 - 4500 rpm, motor 4.5 kW, spindle taper SK 40, control Heidenhain TNC 320, table size 750x450 mm, hydraulic tool clamping system, coolant system, splash guard, tool holders, electronic handwheel, operating manual Dsdpfewb Erzox Aa Howf

Stanje: rabljeno, Multiple broaching tools: all technical terms refer to various broaches and special tools for forming profiles, especially keyways and hexagonal shapes, used in slotting/broaching machines. - Vielkeilräumnadel: multi-spline broach - Sechskanträumwerkzeug: hexagonal broaching tool - Räumwerkzeug: broaching tool - Räumnadel: broach (broaching needle) - Sonderwerkzeug: special tool - Nutwerkzeug: keyway tool - Nutenziehmaschine / Nutenstossmaschine / Nutenstoßmaschine: keyway broaching machine (slotting machine) - Nutenstosswerkzeug: slotting tool for keyways - Stoßräumnadel: slot broach Manufacturer: SWZ, broach / slot broach Type: SW 19 1TGL 29-16600/02 20/50 HSS Article no.: 440 0432 08 102 04708 Dedpfeitt R Sex Aa Hswf Width: hexagon, 19 mm (wrench size), see photos Quantity: 1 piece available Dimensions (overall): 950/22/22 mm Weight: 1.7 kg

Stanje: rabljeno, Leto izdelave: 1996, x-axis travel: 400 mm y-axis travel: 350 mm Dwedpsw U U Siofx Aa Hof z-axis travel: 400 mm Tool holder: SK 40 Spindle speeds: 1.0 – 4,000 rpm Feed rates: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 CNC control: TNC 124 Motor power: 5.5 kW Weight: 1,800 kg Required space: approx. 2,000 x 1,000 x 2,100 mm Original price: ~ EUR 55,000 (!!) Equipment: - Universal tool milling machine - HEIDENHAIN TNC 124 CNC control - Swiveling control panel, positioned on the right - Hydraulic tool changer (DIN 69872) - Vertical milling head – SK 40 - X-axis feed: 0 – 2,000 mm/min - Y-axis feed: 0 – 2,000 mm/min - Z-axis feed: 0 – 2,000 mm/min - Centralized electric lubrication - Coolant system - Chip tray - Operating manual for both machine and control Special accessories included: - Hydraulic machine vice - Multiple tool holders - HEIDENHAIN HR 410 electronic handwheel

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Kunzmann WF4/3, Heidenhain Digital Readout, Year 1994 – Excellent Condition! Technical Specifications: • Year of manufacture: 1994 • Rigid angular table • Spindle speed range: 40 – 2550 rpm • Infinitely variable feed in X, Y, Z axes: 0 – 2000 mm/min • Travels (X/Y/Z): 400/320/400 mm • Rapid traverse in all axes • Vertical quill travel: 60 mm • Vertical and horizontal quill – SK40 taper • Hydraulic drawbar system • Weight: approx. 1500 kg Equipment and Accessories: • 3-axis Heidenhain digital readout Dedsvyr R Njpfx Aa Hewf • Centralized electric lubrication • Machine leveling feet • Handwheels • Coolant unit About the Machine: For sale is a Kunzmann WF4/3 universal milling machine in excellent condition. The machine comes from a government entity and was only lightly used. Switching from vertical to horizontal milling is quick and easy by simply swinging the vertical head aside. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power at our facility.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-compliant, from Training Workshop!! Technical Data: • Year of manufacture: 2010 • Machine No.: 347283 • Rigid angle table • Spindle speed: stepless up to 4500 rpm • Feed: stepless in 3 axes from 0 to 2000 mm/min • Rapid traverse (X and Y axis): 5000 mm/min Z axis: 4000 mm/min • Travel (X/Y/Z): 400/350/400 mm • Table surface: 650 x 350 mm • Table load: 250 kg • Vertical quill stroke: 60 mm • Vertical quill and horizontal quill – SK40 • Hydraulic drawbar system • Weight approx. 1800 kg • Space requirement approx.: 2.3 x 2 x 2 m • Drive power: 15 KVA Accessories and Features: • Heidenhain TNC 320 CNC control • Hydraulic clamping vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manual, and programming examples • Handwheels • Coolant system • Electronic handwheel HR410 About the Machine: Dwedoxuppujpfx Aa Hjf For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition with very low operating hours. It was used exclusively for training purposes. The TNC 320 control is very user-friendly. Furthermore, the machine features hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal is extremely simple thanks to the swiveling vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. You are welcome to inspect and test the Kunzmann under power at our site. A total of 7 Kunzmann WF4/3 machines with Heidenhain TNC 320 CNC control are available. All machines are immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contouring Control - Excellent Condition, CE Certified, from Training Workshop! Technical Data: - Year of manufacture: 2010, Machine No. 347284 - Fixed angle table - Infinitely variable spindle speed up to 4,500 rpm - Infinitely variable feed on 3 axes from 0 to 2,000 mm/min - Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min - Travel (X/Y/Z): 400/350/400 mm - Table size: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill - SK40 - Hydraulic clamping system - Weight approx. 1,800 kg - Space requirement approx.: 2.3 x 2 x 2 m - Drive power: 15 KVA Equipment and Accessories: - Heidenhain TNC 320 contouring control - Hydraulic clamping for vertical and horizontal operations - Automatic central lubrication - Spindle brake - Technical documentation, spare parts lists, user manual for the control, and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 Dwedpfx Ajxupdlea Hof About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contouring control. This universal milling machine is in excellent condition and has very low operating hours. It comes from a facility where it was used solely for training purposes. The control is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching from vertical to horizontal operation is very simple thanks to the folding vertical head. The guideways are lubricated regularly by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our facility. A total of 7 Kunzmann WF4/3 milling machines with Heidenhain TNC 320 controls are available. The machines are immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Kunzmann WF4/3 Universal Tool Milling Machine with Heidenhain TNC 320 CNC Control, Excellent Condition, CE-Compliant from Training Workshop! Dsdpfjxupc Ujx Aa Hjwf Technical Data: >> Year of manufacture: 2010, Machine No. 347247 >> Fixed angle table >> Infinitely variable speed up to 4500 rpm >> Infinitely variable feed in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axes: 5000 mm/min Z axis: 4000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirements: approx. 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Equipment: >> Heidenhain TNC 320 CNC control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control manual and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition and has very few operating hours. It comes from a facility where it was used exclusively for training purposes. The control system is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very easy by tilting away the vertical head. The guideways are regularly lubricated via the central lubrication system. The Kunzmann has been both mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our location. There are 7 pieces of Kunzmann WF4/3 milling machines with Heidenhain TNC 320 controls available. The machines are immediately available.