Pozicioner

Kuka KUKA KPF1-V500 Variante 3 / Art. Nr. 16002730

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B Bledpfx Ajw Sy T Hsfned POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, Drying Paternoster for Finger-Jointed Boards Bodpfx Aewclkysfnold Consisting of: - Transfer chain after finger jointing press, foldable - Drying paternoster approx. 7 m, suitable for board lengths up to 6 m - Cut-off and zeroing saw - Conveyor belt for residual wood disposal - Stacking system - Batten magazine is not for sale - Package cross conveyor The machine is in very good condition, very little operating time. The machine is still assembled but immediately available.

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: Bsdpfx Aefxyhfsfneld - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: potreben popravila (rabljeno), Leto izdelave: 1999, Funkcionalnost: nefunkcionalno, Machines for restoration Blodelxqk Rspfx Afned

Stanje: dober (rabljeno), Leto izdelave: 2001, Prodajam 3-osni CNC obdelovalni center HOLZ-HER UNI-MASTER 7226 s prečnim delovnim mizo, letnik 2001. Konfiguracija: Glavno vreteno za 3 osi, popolnoma obnovljeno / vodno hlajeno Magazin za orodja za 6 HSK63 mest na glavi 1x utorna žaga v X-smeri Vrtalna glava s 16+4 vrtalnimi vreteni Uporabna delovna površina 3100x1360 mm 2 delovni območji, 4 vpenjalna območja Avtomatski sistem centralnega mazanja Holzher programska oprema z navodili za uporabo Bjdpfxoi U Dxuo Afneld Črpalka SIEMENS ELMO-L S22 2,35 kW Dodatni vakuum za šablonska dela ali dodatne vpenjalne naprave Dobro stanje. Na voljo takoj iz zaloge.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, nosilnost: 210 kg, doseg roke: 3.100 mm, Our industrial robots are thoroughly inspected, tested, and immediately ready for operation before delivery. The robot comes complete with: - Control cabinet Bsdpfx Ajwlz Dbjfnjld - Teach pendant - Connection cables

Stanje: dober (rabljeno), Leto izdelave: 2008, Granulator La Meccanica CLM 800 POR The machine does not have doors Blsdpfx Afswdawqsnjd It was used for processing wood shavings

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10014777, skupna masa: 1.300 kg, nosilnost: 210 kg, doseg roke: 2.696 mm, We offer industrial robots from the manufacturer KUKA. The scope of supply includes the robot arm, control cabinet, and the corresponding cables. The robots originate from a fully operational system and have been professionally dismantled. We conduct a functional test and inspect the robots. If interested, we can demonstrate the robots’ functions to ensure they meet your requirements. - Optional Upgrade for an Additional Charge - We are pleased to introduce a new feature for our robots: the Siemens S7-1200 Profisafe safety controller. This controller enables seamless integration of an emergency stop, safety door, and start/stop interface via the Profisafe bus. The controller is completely configured and programmed, allowing you to easily implement a stand-alone solution with a robot and safety fence. Additionally, we can support you with commissioning if required. A 14-day return policy applies for this option; further warranty services are excluded. We maintain an extensive stock of these robots, and the stated prices correspond to a package price. Blsdpfxeq Suwbj Afnod Discounts for larger order quantities are negotiable. Please feel free to contact us again to discuss further details. Sale exclusively to commercial customers.

Stanje: novo, Leto izdelave: 2026, Za profesionalno in natančno doziranje količine lepila v izvrtinah za moznike in utorih zadnjih sten. Kratek opis: • Vedno enaka in pravilna količina lepila • Ni potrebno naknadno čiščenje obdelovancev zaradi preveč lepila Bsdpfodxz Tpox Afneld • Enostavno in minimalno čiščenje lepilnega sistema (1x tedensko, prek programa za izpiranje) • Prihranek pri stroških lepila • Ergonomska in lahka lepilna pištola v primerjavi z lepilnimi steklenicami • Hitrejše in natančnejše delo v primerjavi z lepilnimi steklenicami

Stanje: rabljeno, številka stroja/vozila: 007350, Working area X-axis: 4000 mm Working area Y-axis: 1400 mm Working table: With vacuum console supports Main spindle power: 15 kW Number of controlled axes: 4 axes Number of drilling spindles: 30 Number of tool positions: 28 Blsdpfjwcyd Isx Afnjd