Črpalka ETANORM G 150-250

KSB ETANORM G 150-250 G10

Stanje: novo, Leto izdelave: 2025, The Automatic Basket Cleaning System XTON Smart Cleaner SC1000™ is constructed from stainless steel AISI 304 and acid-resistant stainless steel AISI 316. It is designed for use in various industrial sectors and the automotive industry. The cleaning system is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned components. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA fluid, which, in combination with optimal temperature and pressure, effortlessly removes all types of contamination. The system operates in a closed loop at temperatures of up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-liter tank, which can be optionally thermally insulated to prevent rapid cooling of the cleaning fluid. The Smart Cleaner SC1000™ delivers high cleaning quality, time and energy savings, and safe, user-friendly operation. The cleaning system is designed for the automatic removal of contaminants from surfaces made of cast iron, aluminum, and steel. The design and construction of the Smart Cleaner SC1000™ meet the highest quality standards ISO 9001 and environmental standards ISO 14001. FEATURES: - Rotating basket with a diameter of 100 cm - Heated tank with a capacity of 300 liters - Dual liquid filtration system - Sensors for liquid level and temperature - Oil separator - Height-adjustable feet (up to 100 mm) - XTON Active Cleaner BA (5-liter starter pack) TECHNICAL DATA: - Weight: 200 kg - External dimensions – open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions – closed chamber (W x D x H): 150 x 120 x 140 cm - Diameter of rotating basket: 100 cm - Load capacity of rotating basket: 300 kg - Adjustable working time: 0 – 99 min - Washing/fluid temperature: up to 80°C - Heating power: 9 kW - Tank volume: 300 L Hjdpfx Aou R Urhsfwjff - Tank volume up to oil separator: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 – 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency stop switch, limit switch - Protection rating: IP 54 - Declaration of conformity: CE

Stanje: rabljeno, Grundfos CR 60 20 A-F-A-BBUE Model B500002P39447 16 bar max. 110°C 60 m³/hour Hsdpfxjuif Iuj Afwsff 20.2 m head n = 2900 rpm This offer is directed exclusively at commercial customers within the meaning of §14 BGB. No sale to private individuals.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 3.000 kg, Največja masa rotorja ---3000 kg (6613,87 lb) Najmanjša masa rotorja ---30 kg (66,14 lb) Največji premer rotorja ---1400 mm (55,12 in) Najmanjši premer gredi ---20 mm (0,79 in) Največji premer gredi ---300 mm (11,81 in) Moč motorja ---11 kW (14,75 KM) Pogonska enota (standardno) ---11 kW (14,75 KM) Hitrost uravnoteženja ---0-3000 vrt/min (25 Hz) (nastavljiva navzgor in navzdol) Pogonska enota --- Samo jermen ali gred / jermen + gred Dolžina postelje ---3000 mm (118,11 in) Hedjr Dd Avopfx Afwsff

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna dolžina: 5.000 mm, skupna višina: 2.400 mm, skupna širina: 1.500 mm, skupna masa: 1.200 kg, leto zadnje generalne obnove: 2025, višina izdelka (maks.): 120 mm, višina izdelka (min.): 10 mm, največja dolžina izdelka: 550 mm, dolžina izdelka (min.): 50 mm, Ilapak Carrera 2000 PC Horizontalni flowpack stroj za pakiranje, naprava v zelo dobrem stanju – kot nova Stroj je po temeljiti prenovi, ki sem jo opravil osebno. Delal sem kot serviser pri Ilapak, zato je popolnoma obnovljen v tovarniško stanje. Stroj je preizkušen, v odličnem stanju in pripravljen na takojšnjo uporabo. Tehnični podatki stroja: - Hitrost stroja do 100 ciklov/min - Dolžina varilne čeljusti: 250 mm, nov raven nož - Servomotorji na vseh oseh - Dovoljene dimenzije pakiranega izdelka: dolžina: 50–550 mm, širina: 20–230 mm, višina: do 120 mm - Fiksna oblikovalna škatla - Največja dolžina folijskega navitja: 630 mm - Sistem NPNB (No product no bag) - Senzor za delo s potiskano folijo - Skupna dolžina stroja: 5 m, širina: 1,3 m, višina: 2,4 m - Teža: 1200 kg Dodatno nameščene naprave: Hodpfxsxw Ilao Afwsff - Termotransferni tiskalnik ICE ZODIAC Videojet Datflex 53 mm - Etiketirka HERMA H400 16R Možnost prilagoditve za pakiranje določenega izdelka.

Stanje: rabljeno, prevoženi kilometri: 173.900 km, prva registracija: 11/2000, skupna masa: 12.500 kg, vrsta goriva: dizel, barva: oranžna, konfiguracija osi: 2 osi, vrsta prenosa: mehanski, emisijski razred: Euro 3, Leto izdelave: 2000, Oprema: ABS, klimatska naprava, kompresor, pogon na vsa štiri kolesa, spojka prikolice, U 400 Kommunalfahrzeug Hsdpfx Afji R Ahmjwoff Winterdienstausrüstung Aufbaustreuer EPOKE, 2,0 m³

Leto izdelave: 1991, stanje: skoraj kot novo (rabljeno), skupna masa: 1.420 kg, največja hitrost vrtenja: 1.485 obr/min, 3 stainless steel spiral volute process pumps Hsdsqabiaspfx Afweff 2 x CPK-CM 250-315, year of manufacture 1991 1 x CPKN-C1 250-315, year of manufacture 2011 !!! Price per unit !!! Pumps were operated on a test bench and all have very low operating hours! See pictures!! Flow rate: 1001 m³/h (278 liters/second) Delivery head / Pressure: 18 m / 1.8 bar Pump speed: 1485 rpm NPSH: 5.00 m Shaft seal: Single-acting mechanical seal with flushing water Manufacturer: Burgmann Impeller type: Closed radial impeller Impeller diameter: 324 mm Bearing type: Rolling bearing Lubrication: Oil Oil level monitoring Materials: 1.4408 (AISI 316) Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing lantern: Cast iron JL1040 Shaft sleeve: CrNiMo steel Suction nozzle nominal diameter: DN 300 Discharge nozzle nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure discharge side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without spacer sleeve Baseplate: Painted cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 rpm Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor output P2: 75 kW Thermal class: F Motor protection: IP55 Power factor (cos phi): 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, We are offering a top-quality 3D scanner from GOM: GOM ATOS IIe Rev.01 Complete, ready-to-connect system including all cables. Please note: The PC has a password set, but the software is included on CD. Includes various sensor heads: Measuring volumes: - Set 175x140 - Set 350x280 - Set 550x - Set 1000x800 Complete GOM PC in an aluminium case with Linux software, fully ready for operation with GOM ATOS IIe Software included on CD, steel scale bars with ATOS evaluation dongle Spare lamp Calibration panel (aluminium) CP20/MV 350x280mm² Hsdpfx Afow E I Itswoff

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SN: B397497, Oprema: Na voljo je tipska ploščica, Three-phase hermetically sealed oil transformer Type: 1000 kVA 20/0.4 kV Dy11 with significantly reduced losses according to Directive 2009/125/EC EU Regulation No. 548/2014 Rated power: 1000 kVA High voltage: 20 kV Low voltage: 400 V Tap changer: +/- 2 x 2.5% Frequency: 50 Hz Vector group: Dy11 HV connections: Outer cone as per DIN 47 636-2, 250 A Hedpfx Afowxm E Dswsff LV connections: As per DIN EN 50386 with connection flags Equipment: Thermometer

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4012M-4212, merilno območje os X: 900 mm, merilno območje osi Y: 1.000 mm, merilno območje os Z: 600 mm, teža obdelovanca (maks.): 1.200 kg, Oprema: Na voljo je tipska ploščica, Tehnični podatki: Tip stroja: Mitutoyo STRATO 9106 FAL-A910 Leto izdelave: 2001 Merilno območje: 900 x 1000 x 600 mm Programska oprema: Mitutoyo Software v2.4.R11 Oprema: Hfsdpfx Afoqz T H Ajwjf Nosilec glave: Renishaw SP80 Merilna glava: Renishaw SP80 Dodatna oprema: kalibracijska keramika, različne merilne kroglice in podaljški, Renishaw menjalna enota, pritrdilni set s 4 x SCP80 in nosilec za tipalo Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter predhodne prodaje!

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a wide range of marking tasks. The integrated fiber laser allows you to mark nearly all materials, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become essential in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after initial configuration. Furthermore, the software can retrieve data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it into predefined fields. The use of a handheld scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be fitted with a rotary axis (three-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Hodpfx Asu Smd Ejfwoff Fiber laser 30W, 20W or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optionally larger) • Marking software EZCAD in German/English • Optional: rotary axis (three-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic focus distance determination • Optional: extraction system (with activated carbon filter) • Pilot laser (simple preview and contour preview) • Focus finder (easy focus adjustment) • Signal tower for operating status display • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / door height (pass-through): 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg