Stroj za brizganje

KraussMaffei PX series

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Petosni rezkalni stroj Jobs. Tip Jomach 143. CNC Fidia. Leto 1994. X4000 Y2700 Z1250. Os A 190. Os C neprekinjena. Os B. Os W. Kedpfxexr I Scs Ah Aofa

Stanje: delavnici obnovljeno (rabljeno), Stock no. 2553 1 used, partially overhauled and function-tested extruder, consisting of: Material hopper Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B Screw diameter: 75 mm – 25 L/D, barrel air-cooled Screw speed up to 130 rpm drive: 120 kW – DC (overhauled), drive via belt pulley Heating zones/controllers for downstream equipment Control cabinet, melt pressure sensor Inspection/test run available at short notice by arrangement at our Wuppertal facility. Matching accessories available on request: > Screen changer Kfodpfeiyynwox Ah Aja > Pelletizing system (strand, hot-cut, or water-ring) > Other options. Additional extruders and complete lines available for demonstration ex works Wuppertal. We look forward to your enquiry or visit.

Stanje: novo, Leto izdelave: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" operator panel with full-colour touchscreen. Plasticizing unit Complete plasticizing unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Nozzle radius: 15 mm Nozzle orifice: 6 mm Technical data (standard version) Clamping unit Clamp force: 3,000 kN Opening force: 169 kN Platen dimensions (H x V): 995 x 1,050 mm Tie bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1,150 mm Ejector stroke: 200 mm Ejector force front/rear: 58 / 28 kN Injection unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2,006 bar Shot volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Standard injection rate: 311 cm³/s Standard screw speed: 260 rpm Ksdpfx Ahsxdd Spj Ajfa Electro-hydraulic system Pump motor power: 45 kW Installed heater power: 22.4 kW Dry cycle time according to Euromap 6: 2.7 s Oil tank capacity: 720 l Linear robot – Krauss-Maffei LRX 150 Payload < 15 kg (gripper + drives + parts) Part release on operator-opposite side Axes: X axis (from mould): 900 mm, servomotor Y axis (vertical, with motor brake): 750/750 mm, servomotor, telescopic Z axis (transverse): — Dimensions and weight Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Stanje: novo, Leto izdelave: 2025, Injection Moulding Machine – Krauss Maffei KM 651-6100 GX Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit control. MC6 control system based on an industrial PC using real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a color touchscreen display. Plasticizing System Complete plasticizing unit for thermoplastics, screw diameter 95 mm, with non-return valve and open nozzle. Nozzle radius: 25 mm Nozzle opening: 9 mm Technical Specifications (standard version) Clamping Unit Clamping force: 6500 kN Opening force: 455 kN Platen dimensions (H x V): 1660 x 1530 mm Tie-bar spacing (H x V): 1200 x 1020 mm Opening stroke: 1450 mm Mould height (min.–max.): 450 – 1000 mm Daylight: 1900 mm Ejector stroke: 300 mm Ejector force, forward/back: 140 / 70 kN Kfjdpfjxdd U Dex Ah Aja Injection Unit Screw diameter: 95 mm L/D ratio: 23.0 Injection pressure: 1795 bar Shot volume: 3367 cm³ Shot weight (PS): 2391 g Injection speed: 110 mm/s Injection capacity: 780 cm³/s Screw speed (standard): 147 rpm Plasticizing rate (at standard speed): 102 g/s Nozzle contact force: 166 kN Electro-hydraulic System Pump motor power: 97 kW Installed heater power: 54 kW Number of barrel heating zones: 7 Dry cycle time (per Euromap 6): 3.3 s / 840 mm Dry cycle time (KM standard): 2.9 s / 600 mm Oil tank capacity: 1435 l Linear Robot – Krauss-Maffei LRX 250 Payload < 25 kg (gripper + drives + parts) Part placement on operator-opposite side Axes: X axis (from mould): 900 mm, servomotor Y axis (vertical, telescopic, with motor brake): 1000/1000 mm, servomotor Z axis (crosswise): 2500 mm, servomotor Dimensions and Weight Net weight (with control cabinet): 38.5 t Machine dimensions (L x W x H): 10.19 x 3.03 x 2.51 m

Stanje: dober (rabljeno), Leto izdelave: 2003, Netstal S-1500-460 (2003) Zapiralna sila - 150 t Premer polža - 45 mm Ure delovanja - 79.000 Razdalja med stebri (razmak stebrov): 460 × 460 mm Kfsdpfx Ahjwkg Txe Asa Velikost orodjarskih plošč (fiksna/pomična plošča): 757 × 757 mm Odpiralni hod: 450 mm Min. višina orodja: 250 mm Maks. višina orodja: ≈ 550 mm Maks. odprtina (maksimalna razdalja plošč): deloma višja, odvisno od konfiguracije Vbrizgavalna/plastifikacijska enota: Premer polža (cilinder): 40 mm v standardni izvedbi. Volumen vbrizga (maks.): ≈ 201 cm³ Teža vbrizga za PS: pogosto okoli ~193 g (odvisno od materiala) Vbrizgovalni pritisk: odvisno od konfiguracije (nekateri viri navajajo okoli 1750 bar ali več) Dimenzije stroja &amp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Zapiralna sila: 550 t Premer vijaka: 62 mm Razdalja med vodili V: 920 mm Razdalja med vodili H: 1020 mm Prostornina brizganja: 749 cm3 Debelina orodja: 600-1050 mm Največji hod odpiranja: 901 mm Upravljalniki vročih kanalov: 16 x Hidravlični vleki jeder: 2/3 (fiksna/premična plošča) Kjdpfx Aoxbd R Hsh Aefa Tip: Horizontalen Pogon: Hidravlični