CENTRIFUGA S KOŠARO

KraussMaffei KM 125

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Two Krauss Maffei injection molding machines are available: Ndodpfxew Emybo Al Dsb 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30 mm, L/D ratio: 23, injection pressure: 2500 bar, shot volume: 85 cm³, machine dimensions (L/W/H): approx. 3200 mm / 1350 mm / 1800 mm, weight: approx. 2500 kg, control system: MC4, operating hours: approx. 86,000 h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45 mm, L/D ratio: 20, injection pressure: 1878 bar, shot volume: 217 cm³, machine dimensions (L/W/H): approx. 4500 mm / 1550 mm / 2200 mm, weight: approx. 5500 kg, control system: MC4, operating hours: approx. 82,000 h. Documentation is available. Inspection on site is possible.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, Zapiralna sila: 110 t Premer polža: 22 mm Volumen vbrizga: 41 cm3 Razmerje L/D polža: 20 Izračunan delovni volumen: 41,8 cm3 Pravi vbrizgalni tlak: 2.864 bar Najv. vrtljaji polža: 500 min Polžni moment: 150 Nm Kontaktna sila šobe: 250/40 mm/kN Zunanji tok vbrizga: 76 cm3/s Grelna moč cilindra: 6,3 kW Število grelnih con: 4 Tip: Horizontalen Pogon: Električni Nsdsu Eki Sjpfx Al Dedb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, vpenjalna sila: 1.250 kN, skupna širina: 1.500 mm, skupna višina: 2.100 mm, skupna masa: 6.000 kg, največja dolžina izdelka: 4.400 mm, Hydraulic injection moulding machine from 2003. This Krauss Maffei KM125-520C2 offers a clamping force of 1250 kN and an opening stroke of 900 mm. The machine features a screw diameter of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking for a high-quality injection moulding machine, the Krauss Maffei KM125-520C2, which we have for sale, should be considered. Please contact us for further details. • Opening force: 35 / 28 kN • Tie bar distance (H × V): 470 × 470 mm • Minimum mould installation height: 300 mm • Opening stroke: 900 mm Nsdsylkxajpfx Al Djdb • Ejector stroke: 150 mm • Ejector force: 22 / 10 kN • Injection unit: SP 520 • Screw diameter options: 35 / 40 / 45 mm • Shot volume: approx. 156 / 204 / 258 cm³ • Injection pressure: up to approx. 1800+ bar (depending on screw) • Screw speed: approx. 391 / 489 rpm • Plasticising capacity (PS): approx. 22-41 g/s (depending on screw) • Pump motor power: 18.5 kW • Installed heating capacity: 13 kW • Oil capacity: 345 l • Max. mould weight: 1485 kg • Power supply: 3 phase • Operating voltage: 400 V • Frequency: 50 Hz Additional equipment • Cooler (included)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 21.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.250 kN, premer vijaka: 40 mm, delovna prostornina: 217 cm³, tlak vbrizgavanja: 2.377 letvica, hod izmetalca: 150 mm, odmični hod: 600 mm, skupna dolžina: 4.480 mm, skupna širina: 1.510 mm, skupna višina: 2.190 mm, skupna masa: 6.000 kg, moč: 18,5 kW (25,15 KM), Oprema: dokumentacija / priročnik, In perfect shape. Ndedpowlhb Tofx Al Deb

Stanje: dober (rabljeno), Format: največ 750 x 1050 mm Ndodod Hp H Iepfx Al Djb Višina osi: 940 mm Nosilnost: največ 600 kg

Leto izdelave: 2018, stanje: novo, Load capacity: max. 1,000 kg Ndsdpfxsdx Ryyj Al Dob Coil inner diameter: min. 400 mm Coil outer diameter: max. 1,100 mm Coil height: max. 800 mm

Stanje: dober (rabljeno), Leto izdelave: 2013, vpenjalna sila: 16.000 kN, Oprema: dokumentacija / priročnik, Zapiralna sila: 1600 t Premer vijaka: 135 mm Razdalja med stebri V: 1420 mm Razdalja med stebri H: 1870 mm Prostornina vbrizga: 9662 cm3 Tip: Horizontalen Pogon: Hidravlični Nodpfxsyh I Emo Al Dsdb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 8.000 h, vpenjalna sila: 500 kN, premer vijaka: 25 mm, injekcijska masa: 46 g, skupna višina: 1.779 mm, skupna masa: 4.200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Included with the machine are a granulate dryer, an industrial robot, a conveyor belt, and temperature control units. Ideal for high-quality injection moulding processes. Please contact us for more information about this machine. Additional Equipment Nsdpfx Alex D Ecce Dodb • Granulate dryer • Handling system • Conveyor belt – 1400 mm x 400 mm • Precision scale • Temperature control units – 2x HB-Therm Machine Advantages Technical Machine Advantages • Exceptional energy efficiency • Increased platen rigidity and mould safety • Fully electric direct drive • Ultra-precise direct drive motors with a response time of 0.1 ms • Displacement: 52 cm³ • Injection pressure: 2180 bar • Clamping platens: 520 x 570 mm Additional Information Control Unit Modern control system with NC5+ Automatic adjustment of mould height and clamping force Energy-saving routines Dimensions Machine depth: 4308 mm

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), The Coiltech Decoiler Straightener Feeder System is a compact coil feeding system for presses. Strip width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler capacity: 6000kg, inner diameter (min-max): 470-520mm. Connected load: 7.5kW, supplied with documentation. Ndodpfx Asi El Ucsl Djb

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 Ndjdjw U N Ixepfx Al Dob • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.