Stroj za brizganje

KraussMaffei 160-750 CX

Stanje: rabljeno, Leto izdelave: 2008, vpenjalna sila: 160 kN, delovna prostornina: 251 cm³, tlak vbrizgavanja: 2.500 letvica, skupna masa: 8.200 kg, delovne ure: 37.200 h, premer polžastega transporterja: 40 mm, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto Gtsdpfx Aowd Udlsb Esw

Stanje: rabljeno, Leto izdelave: 1998, Overview Gtedpferkgy Uox Ab Eew This machine was built in 1998 by the French manufacturer Sidel. The machine is in very good condition, has already been professionally dismantled, and is stored in a warehouse. Technical Details - Capacity: 7,200 bottles/hour at 1.5L - Number of cavities: 6 (moulds not included) - Equipped with quick-change system for shell moulds - Number of heating modules: 10 modules - Neck personalization: 29/25 - Operating hours: 47,000 - Machine has been regularly maintained Machine is equipped with: - Sidel elevator for preforms to the unscrambler - Sidel preform unscrambler & feeding system - Sidel oven & blowing wheel for 6 moulds - Sidel control cabinet - Sidel PCC drive & control panel Comprehensive spare parts list available upon request.

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 17.481 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 50 mm, razmak između stupova: 520 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 1.892 letvica, injekcijska masa: 375 g, minimalna višina orodja: 300 mm, izmetalna sila: 33 N, hod izmetalca: 150 mm, skupna dolžina: 5.000 mm, skupna širina: 1.600 mm, skupna višina: 2.000 mm, skupna masa: 8.200 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), moč črpalke: 2.200 W, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, stroj je redno vzdrževan, možen test Gtedpfxexvqnne Ab Ejw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 58.670 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, delovna prostornina: 318 cm³, Clamping force: 1600 kN Max. mold opening force: 87 kN Moving platen opening force: 45 kN Gjdpeydp Idjfx Ab Eetw Moving platen closing force: 38 kN Mounting platen (H x V): 820 x 845 mm Clearance between tie bars (H x V): 520 x 520 mm Mold opening stroke: 650 mm Min. mold installation height: 300 mm Max. daylight: 950 mm Ejector stroke: 150 mm Ejector force fwd./rev.: 23 kN Injection unit: Screw diameter: 45 mm L/D ratio: 22.4 Injection pressure: 2336 bar Shot volume: 318 ccm Shot weight (PS): 289 g Injection flow: 143 ccm/s Screw speed: 265 rpm Plasticizing rate: 29.3 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated pump motor power: 22 kW Installed heating power: 16 kW Cylinder heater control zones: 5 Oil capacity: 489 ltr. Dimensions and weight: Space requirement approx.: 5.00 x 2.00 x 2.20 m Total weight: 6600 kg Max. mold weight: 1862 kg Accessories: - Vibration isolators - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 1500 mm C: 0 – 90° Additional equipment: - 1 x air valve - 2 x hydraulic core pulls - 6 x hot runner control zones - Robot interface according to Euromap 67

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), INJECTION MOLDING MACHINE KRAUSS-MAFFEI 150-700 C1 Year: 1999 Screw diameter: 55 mm Gtodpfeh S Dncjx Ab Esw In excellent condition, still in operation

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 68.590 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, delovna prostornina: 393 cm³, Clamping Force: 1600 kN Max. Tool Opening Force: 87 kN Movable Platen Opening Force: 45 kN Movable Platen Closing Force: 38 kN Clamping Plate (H x V): 820 x 845 mm Clear Distance (H x V): 520 x 520 mm Mould Opening Stroke: 650 mm Min. Mould Installation Height: 300 mm Maximum Opening Width: 950 mm Ejector Stroke: 150 mm Ejector Force Forward/Return: 23 kN Injection Unit: Screw Diameter: 50 mm L/D Ratio: 20 Injection Pressure: 1892 bar Shot Volume: 393 ccm Shot Weight (PS): 358 g Injection Flow Rate: 177 ccm/s Screw Speed: 265 rpm Godpfx Absydp D Eo Eetw Plasticizing Rate: 36.2 g/s Nozzle Contact Force: 50 kN Electrohydraulic Equipment: Pump Motor Rated Power: 22 kW Installed Heating Capacity: 16 kW Cylinder Heating Control Zones: 5 Oil Capacity: 489 l Dimensions and Weights: Space Requirement approx.: 5.50 x 2.00 x 2.20 m Total Weight: 6600 kg Max. Mould Weight: 1862 kg Accessories: - Oscillation elements - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 2500 mm C: 0-90° Additional Equipment: - 1x air valve - 2x core pull - Robot interface according to Euromap 67

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with colour monitor, integrated control panel, and built-in USB ports. Plasticising Unit 1 complete HPS-UN plasticising unit for thermoplastics: Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 10 mm Nozzle orifice: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mould opening force: 86.4 kN Moving platen force: opening: 44.8 kN closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mould opening stroke: 650 mm Minimum mould height: 300 mm Total daylight (max. platen opening): 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Gtodpfxex Thzps Ab Ejw Screw diameter: 50 mm Injection pressure: 1,892 bar Injection volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard / optional): 390 / 490 rpm Electrical and Hydraulic Equipment Pump drive power: 22 kW Installed heater power: 10.97 kW Number of heating zones (barrel): 5 Dry cycle time (Euromap): 1,600 1/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Leto izdelave: 2022, stanje: novo, Vretenasta žaga za natančen razrez manjših elementov, namenjena proizvodnji okvirjev za čebelje sate – Moč: 11 kW – Premer vretena: fi 70 mm – Število žaginih listov: 10 – Premer žaginega lista: 210 mm – Minimalna dolžina obdelovanca: 100 mm – Največja višina: 40 mm – Hitrost podajanja: 4–8 m/min – Sistemski nosilec žaginih listov za hitro menjavo Gtodpeh Hxycefx Ab Esw

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Krauss Maffei Injection Moulding Machine KM 110–750 CX Year of manufacture – 2007 Fully hydraulic clamping system. MC5 control with a colour monitor, integrated operator panel, and 3 USB ports. Plasticising Unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1100 kN Mould opening force: 70 kN Movable platen force: - Opening: 35.4 kN - Closing: 31.4 kN Platen dimensions (h × v): 745 × 770 mm Tie bar spacing (h × v): 470 × 470 mm Mould opening stroke: 600 mm Minimum mould height: 300 mm Gtsdpjx Avhyofx Ab Ejw Platen opening stroke: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2500 bar Shot volume: 251 cm³ Shot weight (PS): 228.41 g Screw rotation speed (standard/option): 295 / 355 rpm Electrical & Hydraulic Equipment Pump motor rated power: 22 kW Installed heater power: 15.62 kW Number of cylinder heating zones: 5 Dry cycles per Euromap: 2000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Stanje: novo, Leto izdelave: 2025, Injection Moulding Machine – Krauss Maffei KM 160-750 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" operator panel featuring a colour touchscreen display. Plasticizing Unit Complete plasticizing unit for thermoplastics, screw diameter 50 mm, with non-return valve and open nozzle Nozzle radius: 10 mm Nozzle opening: 4 mm Technical Specifications (Standard Version) Clamping Unit Clamping force: 1,600 kN Opening force: 86 kN Platen dimensions (H x V): 820 x 845 mm Tie bar spacing (H x V): 520 x 520 mm Gedpsxdd N Usfx Ab Eotw Opening stroke: 650 mm Minimum mould height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Ejector force, forward/reverse: 23 / 10 kN Injection Unit Screw diameter: 50 mm L/D ratio: 20.2 Injection pressure: 1,892 bar Injection volume: 393 cm³ Shot weight (PS): 357 g Injection speed: 90 mm/s Injection rate (standard): 177 cm³/s Screw speed (standard): 265 rpm Electro-hydraulic System Pump drive power: 22 kW Installed heating capacity: 15.5 kW Dry cycle time according to Euromap 6: 2.1 s Oil tank capacity: 400 l Linear Robot – Krauss-Maffei LRX 100 Payload < 10 kg (gripper + drives + parts) Part removal on operator-off side Axes: X-axis (from mould): 620 mm, servo motor Y-axis (vertical, with motor brake): 1200 mm, servo motor Z-axis (crosswise): 1500 mm, servo motor Dimensions and Weight Net weight (with control cabinet): 6.10 t Machine dimensions (L x W x H): 4.93 x 1.62 x 2.04 m

Stanje: novo, Bester Preis: 4499 EUR (EXW Jonava, Litauen) Abmessungen des Schiebeschlittens: 2200 x 375 mm Max. Schnittlänge: 1500 mm Schnittbreite zwischen Sägeblatt und Parallelanschlag: 1140 mm Sägeblattdurchmesser: 400 mm Gtsdodnxydjpfx Ab Esw Schnitthöhe (90°): 115 mm Schnitthöhe (45°): 105 mm Drehzahl Hauptsäge: 4.500 / 6.000 min⁻¹ Hauptsägewelle Durchmesser: 30 mm Sägeblatt schwenkbar: 0–45° Sägenhub, Heben und Senken mit elektrischer Steuerung Hauptmotor: 5,5 kW Vorschnittsägeblatt Durchmesser: 120 mm Drehzahl Vorschnittsäge: 7.000–8.000 min⁻¹ Vorschnittsägewelle Durchmesser: 20 mm Vorschnittmotor: 1,1 kW Gewicht: 700 kg * Beim Einsatz eines 400-mm-Sägeblatts muss das kleinere Blatt entfernt werden. * Reduzierte Sägeblätter dürfen nur mit maximal 350 mm Hauptschutz verwendet werden.