Konzolni regal

4 Stück Kragarmregal-Ständer einseitig Höhe 3 m / Nutztiefe 1,2 m / Länge 4 m

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. Gcodpfxjfdkb Us Ab Toa The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: novo, Leto izdelave: 2023, Working width: 600 mm Working height: 280 mm Minimum workpiece length: 250 mm Units: 2 brush stations centrally adjustable, each with individual fine adjustment Diagonal brush technology: Yes, continuously adjustable from -7° to +7° 1st brush: Metal brush, diameter 220 mm 2nd brush: Tynex brush, grit 80, diameter 220 mm Height adjustment: electric Height display: mechanical counter Feed speed: 4 – 12 m/min Brush motor power: 2 x 4 kW Gcodpfsmftk Aex Ab Tja Feed motor power: 0.37 kW Machine length: 1.5 m Machine width: 1.5 m Weight: 700 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. Godpfx Asguk Dkjb Toca The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: novo, Leto izdelave: 2025, - Tfon Leveltech® TF M-5516 Stroj za ravnanje TF M-5516 je zasnovan za natančno ravnanje in učinkovito obdeluje materiale debeline od 1 do 15 mm, z naprednimi funkcijami za optimalno zmogljivost in enostavno uporabo - Ključne tehnične specifikacije - Debelina materiala: 1 – 15 mm - Največja širina materiala: 1.600 mm - Najmanjša dolžina materiala: 110 mm Sistem hitre menjave izravnalnih valjev: standard Nastavitev reže za sploščenje: servo hidravlična / PC nadzorovana Zaščita pred preobremenitvijo: standard Gcodpfx Abskyrqfe Tsa Upravljalni zaslon: zaslon na dotik Dimenzije stroja (D × Š × V): 3.500 × 2.905 × 1.950 mm Skupna masa: 19.000 kg.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.000 mm, skupna širina: 1.250 mm, skupna višina: 2.000 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, moč: 40 kW (54,38 KM), premer žaginega lista: 450 mm, širina obdelovanca (maks.): 300 mm, višina obdelovanca (maks.): 30 mm, zračni tlak: 6 letvica, premer povezave za izpihovanje: 200 mm, premer honanja: 125 mm, število vreten: 2, MARINUS PROMAX – Endenbearbeitungs- und Defektsägemaschine Die Maschine entspricht den folgenden Spezifikationen: • Robuste und schwere Bauweise, Abmessungen LxBxH = 2080x1260x2000 mm. • Durchlaufzuführung mit präziser Positionierung (Servo-Antrieb). • Pneumatische Seitenanschläge für garantiert rechtwinklige Bearbeitung. • SPS-Steuerung. • Bedienung über Terminal. • Modem für Fernprogrammierung. • 2 Servomotoren für maximale Dynamik. • 2 Sägemotoren (3,0 kW). • 2 Hochgeschwindigkeits-Fräsmotoren mit Frequenzumrichter (je 7,5 kW / 200 Hz / n=12.000). • 1 Getriebemotor mit Frequenzumrichter. • 2 Trommelmotoren. • 26 pneumatische Zylinder mit Ventilen. Gcjdpeq Auhdjfx Ab Tja • 1 Lumineszenzsensor • 6 Induktivsensoren • Bandförderer für Abfall, Höhe 1,3 m. • Maschine komplett durch Sicherheitstüren gekapselt. • Maschine gemäß CE-Vorschriften. Längenmesssystem: Ein Längenmesssystem zeigt während der Produktion die Gesamtlänge und die Quadratmeter der Bretter am Display an. Werkzeugausstattung: Optional können wir Werkzeuge (Nut und Feder) mit Wendemessern sowie zwei Kappsägeblätter für die Maschine anbieten. Standardprogrammierung: Die Maschine verfügt über zwei Hauptprogramme: 1. Endenbearbeitung 2. Zuschnitt Beide Hauptprogramme beinhalten zwei Unterprogramme: 1. Variable Längen: Defekte werden ausgeschnitten, Endprodukte haben variable Längen. 2. Feste Längen: Bretter werden in einer festen Länge produziert, die Einfuhrlänge darf maximal +200 mm Übermaß betragen. Defekte können hierbei nicht ausgeschnitten werden. • Min. Breite: 60 mm • Max. Breite: 300 mm • Min. Länge: 500 mm • Max. Länge: 6000 mm • Min. Stärke: 10 mm • Max. Stärke: 30 mm

Leto izdelave: 2007, Stanje: zelo dobro (rabljeno), TOP CONDITION - OVERHAULED IN 2022! Year of manufacture: 2007 Table size: 3000 x 1500 x 100 mm Power: 4000 W Control unit: Mazatrol Preview with LAN/USB Gcjdohturvspfx Ab Toa Includes chiller Includes linear drives on all axes Includes programming software Includes training Includes commissioning Includes fast piercing Includes ball transfer table Includes 4-position head change magazine Includes 2 cutting heads Includes 10-position automatic nozzle changer Mild steel: up to 24 mm Stainless steel: up to 15 mm oxide-free Designed for high-pressure cutting up to 20 bar No foundation required! Regularly maintained Optional: Automatic loading and unloading with Mazak CELL510 INCLUDING warranty / commissioning / training

Stanje: rabljeno, Leto izdelave: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine will be completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and chain dimensions Digital display for horizontal cutting PLC control with 2-line display and plain text for operating mode and error diagnosis Infinitely variable feed speed up to 24 m/min Gcsdpjw Nac Asfx Ab Tja Automatic workpiece end detection Calculator function in control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4500 rpm Saw blade diameter: 300 mm Air requirement: 1200 m³/h Air velocity: 20 m/s Static negative pressure: 1200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5620 (plus extraction nozzle) x 1480 x 2948 mm Room height: 2990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connected load: 5.7 kW with Supercut scoring unit with pneumatically tiltable saw unit with longitudinal stop for lower workpiece support with short flip rail, complete Availability: by arrangement Location: Flörsheim

Stanje: novo, No. 3187 Vacuum Dryer / Drying Chamber ISVE ES 5 / NEW New machine, delivery time: 120 days Design features: Stainless steel AISI-304, partially insulated External diameter: 1,600 mm Cylindrical section length: 5,000 mm Dryer length: 5,900 mm Total dryer length with rails: 11,000 mm Max. operating vacuum: -730 mm Hg Stack length (wood): 5,000 mm Stack width (wood): 1,100 mm Stack height (wood): 990 mm Net wood volume: approx. 5 m³ Installed electrical power: 16.01 kW Average hourly power consumption: 8 kWh Included: - 12 electric heating plates (each 1,100 x 5,000 x 10 mm LWH / 57 kg / 1.25 kW) - 2 internal condensers (turbofans, each 0.55 kW 380 V AC, with stainless steel pipes) - 1 check valve (one ¾” for vacuum circuit) - 1 solenoid valve for air recirculation (24 V AC: one 1” for autoclave) - 1 manual air recirculation (1” ball valve) Gsdpfxevc Axpe Ab Teca - 1 electrical control unit (Siemens S7-1200 PLC with touch panel) - 1 ISVE Server Connect module for remote maintenance and operation - 2 wireless moisture probes (dual probes for core and surface moisture measurement) - 1 wireless temperature probe (for measuring wood core temperature) - 2 plate holders - 1 operating manual (in English, with CE certificate and wiring diagrams) Transport dimensions approx. 5,900 x 1,620 x 2,300 mm LWH Weight approx. 2,900 kg Technical specifications, year of manufacture, and scope of delivery according to manufacturer, without guarantee Subject to prior sale For new machines, the manufacturer's warranty conditions apply Photos and videos are for reference only and may not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex works

Stanje: zelo dobro (rabljeno), Veneer press JU 60 2200 x 1200 mm Heating plate damaged (see pictures), heating plate operates Godpfx Asmhguaob Teca Year of manufacture: 1965, heating power: 12 kW Loading costs (forklift rental approx. €500)

Stanje: novo, Table diameter: 350 mm Godpfx Abegvkk Nj Teca Table load capacity: 0.1 t Swivel range: 0–90 degrees Table load horizontal: 100 kg Table load vertical: 50 kg Bore diameter: 30 mm Table rotation speed: 0.5 – 5 rpm Voltage: 230 V Total power requirement: 0.2 kW Machine weight approx.: 0.2 t Required space approx.: 0.5 x 0.5 x 0.5 m Welding Table with Hollow Shaft D-DWP Rotary tilt tables with bore for rotating, tilting, and welding small workpieces up to 100 kg. - Rotary and tilt axis - Steplessly adjustable speed - Compact design - Including foot pedal