Radialni vrtalni stroj, Kovosvit VO 50

Kovosvit MAS VO 50

Stanje: dober (rabljeno), moč: 4 kW (5,44 KM), nosilec vretena: MK 5, globina grla: 1.600 mm, zmogljivost vrtanja: 50 mm, poteza s peresom: 310 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 28 obr/min, Arm length: 1600 mm Drilling capacity in steel: Ø 50 mm Thread cutting in steel: M50 x 1.5 mm Spindle taper: MT 5 Spindle speeds: 28 - 2500 rpm Spindle feed: 0.05 - 2 mm/rev Spindle stroke: 310 mm Spindle to floor plate: 1500 mm max. Clamping cube: 1000 x 750 mm Hodett I T Ijpfx Afweff Clamping surface floor plate: 1820 x 986 mm Complete with: - Coolant system - Operating manual Spindle motor: 4 kW Country of origin: Czech Republic Machine weight: 4300 kg Dimensions (LxWxH): 3250 x 1120 x 3400 mm

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 3.500 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.500 mm, število osi: 5, Ta 5-osna TOS Varnsdorf WHN130 je bila izdelana leta 2007. Gre za horizontalni vrtalno-rezilni stroj z velikostjo mize 1800 × 1800 mm in premerom vretena 130 mm. Stroj je opremljen z vrtljivo mizo in ga upravlja sistem NCT-104. Razmislite o nakupu tega vrtalnega stroja TOS Varnsdorf WHN130. Za več informacij nas kontaktirajte. Hfjdpfxox Imtae Afwjf • Krmilni sistem: NCT-104 • Miza: vrtljiva, 1800 × 1800 mm • W (izvlek vretena): 570 mm • Premer vretena: 130 mm

Stanje: dober (rabljeno), Leto izdelave: 1999, Vrtalna zmogljivost v jeklu (premer): 60 mm / MK5 Hodpfx Afsyx T Nijwsff Hod pinole: 310 mm Vrtljaji vretena: 28...2500 U/min Velikost mize: 1470 x 986 mm Skupna potrebna moč: 4 kW Teža stroja cca.: 4,6 t

Stanje: rabljeno, Leto izdelave: 2004, Technical details: Maximum wheel diameter: 200 mm Wheel width: 60 mm Maximum module: 7 Machine weight approx.: 15 t Table diameter: 180 mm Table speed range: 100 rpm Cutter speeds: 750 rpm Well-maintained gear hobbing machine without feeder/automation Available from: 24.08.2024 Hodpfx Afsxc E H Sowoff

Stanje: rabljeno, Leto izdelave: 2007, x-pomak 900 mm y-pomak 300 mm z-pomak 1000 mm Upravljanje Siemens 840D Maksimalni prečnik obratka 1600 mm Maksimalni modul 20 mm Prečnik glavnog kružnog oboda 350 mm Težina mašine cca 33.500 kg Potreban prostor cca 10,53 x 6,38 x 4,68 m Tehničke karakteristike: - x-pomak: 900 mm - y-pomak: 300 mm - z-pomak: 1000 mm - Upravljanje: Siemens Sinumerik 840D - Maksimalni prečnik obratka: 1600 mm - Maksimalni modul: 20 mm - Prečnik glavnog kružnog oboda: 350 mm - Prečnik nosača za glodanje: 375 mm - Ukupna priključna snaga: 80 kVa - Težina mašine cca: 33.500 kg - Potreban prostor cca: 10,530 x 6,375 x 4,680 m Brzina posmaka: - X-os: 1 do 3000 mm/min - Y-os: 1 do 3000 mm/min - Z-os: 1 do 4000 mm/min Broj obrtaja vretena u 1/min: - Alat: 26 do 265 - Stol za obradak: 0 do 8 Oprema/pribor: Hjdpfx Afswzypujwjff - Motorizovana glava za glodanje M 2 - Nosači za glodanje - Uljni hladnjak - tehnička dokumentacija

Stanje: rabljeno, Leto izdelave: 2002, Swing diameter: 630 mm Turning length: 3000 mm Swing diameter over cross slide: 480 mm Spindle speeds: 9 - 1800 rpm Spindle bore: 83 mm Tailstock quill taper: MT 6 Total power requirement: 22 kW Machine weight approx.: 5400 kg Space requirement approx.: 5250 x 1900 x 1750 mm Equipment: - Digital readout - 3-jaw chuck Ø315 mm ROTA-S PLUS - MULTI-FIX quick-change toolpost - Digital speed display - Coolant system Hfjdpfxewz Rvle Afwef - Rapid traverse (longitudinal and facing) - Steady rest - Live centre - Chuck guard - Chip guard/rear panel - Machine lamp - Machine feet - Operating manual

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 12.000 kg, dolžina pomika po osi Y: 300 mm, dolžina podajanja os Z: 1.080 mm, premer mize: 1.200 mm, hitrost pomika os X: 3 m/min, hitrost podajanja osi Y: 500 m/min, hitrost podajanja os Z: 3 m/min, vhodni tok: 195 A, premer obdelovanca (maks.): 1.600 mm, dolžina vretena za rezkanje: 450 mm, namizna vrtalna stiskalnica: 400 mm, hitrost vretena (min.): 250 obr/min, skupna masa: 51.000 kg, moč: 115 kW (156,36 KM), Oprema: dokumentacija / priročnik, Liebherr high-performance gear hobbing machine LC1502 in good condition Control: Liebherr LH90 V4, drives by Bosch Rexroth Comprehensive accessories included such as BHG, coolant unit for lubrication and coolant, fume extraction, cutter arbors, various software packages/limit extensions, and complete documentation. Hjdpfx Aewqm A Tefweff We can also assist with installation and commissioning right up to production, according to your needs!

Stanje: rabljeno, Leto izdelave: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: [mm not specified] Workpiece height: 60 mm Total power requirement: 50 kW Machine weight: approx. 7,000 kg Space requirement: [not specified] DISKUS vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of manufacture: 1969 S/N: 6672 Grinding wheels – diameter x bore each: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc external diameter: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Spindle adjustment vertically, each approx.: 150 mm Hydraulic infeed impulses for depth feed: 0.0025 – 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed each approx. (24 m/s)/765 rpm Grinding spindle drive each: 22 kW Total drive approx.: 50 kW / 380 V / 50 Hz Machine weight: approx. 7,000 kg Accessories / Special features • Workpiece rotary table device for round transport discs with corresponding cut-outs for inserting components and with automatic discharge of finished parts onto a chute into a transport box. • IONIC measuring control No. 9 So with probe for measuring ground workpiece height and, if required, with automatic hydraulic grinding wheel infeed. • Stepless speed adjustment of the rotary device depending on the grinding dimension and workpiece. • Manual grinding wheel adjustment via corresponding buttons • Hydraulically pivoting dressing unit (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and automatic return to the effective workpiece thickness after dressing = high time savings, can be triggered manually as well as via timer Hsdjt Hw N Hopfx Afwoff • Ampere counters for both grinding spindle drives * Central lubrication system, • Mechanical height check of parts with automatic machine shutdown in case of overheight • Separate control cabinet, separate hydraulic unit, separate large belt filter system, various grinding wheels, various transport discs, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in high-volume production. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon ready for demonstration Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Leto izdelave: 1992, stanje: rabljeno, Grinding height 50 mm Grinding width 120 mm Grinding wheel diameter 600 mm Total power requirement 85 kW Machine weight approx. 9500 kg D I S K U S CNC-controlled, vertical double-sided surface grinding machine with rotating workpiece infeed and IONIC measurement control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992, No. 7924 --- Hsdpfx Afet Hw Naowjff Grinding wheel dimensions (each): 600 x 150 x 75 mm (H) Workpiece data: Grinding height approx. 1.5 – 50 mm Grinding width approx. 20 – 120 mm Vertical quill adjustment, each approx. 150 mm Infeed increment of grinding wheels via CNC: 0.0001 mm Workpiece transport device, continuously adjustable feed: 40 – 235 mm/sec Grinding wheel speed (each, 30 m/s): 191–955 rpm Grinding spindle drive, infinitely variable (each): 37 kW Total drive power approx. 85 kW / 380 V / 50 Hz Weight approx. 9,500 kg Accessories / Special Features • SIEMENS CNC control SINUMERIK 810 G with display for 4 axes (top and bottom infeed, dresser, and workpiece rotation), direct input of all grinding parameters, and • IONIC measurement control no. 17 A with 2 measuring probes for scanning the workpieces after the grinding cycle, triggers automatic infeed corrections for the grinding wheels; real-time measurement data on monitor for statistics, workpiece counting, etc. • Digital display of current (amperage) of the drive motors and grinding wheel speed • Gantry construction for increased stability and improved grinding accuracy • Rotary workpiece transport with continuously variable speed control as 4th axis • Position control system for monitoring the height position of the lower grinding wheel • 2 adjustable workpiece hold-downs each at the infeed and outfeed, with height monitoring, simple raw part stacking mechanism, finished parts removal via conveyor belt • Half-inclined, side-mounted grinding wheel dressing device with preprogrammable dressing cycles, integrated as CNC axis in the control system with safety shut-off • Large separate electrical cabinet, automatic central lubrication, high-performance pneumatic system • Large PROMATEC (F) coolant system with filtration unit and magnetic separator • Various grinding wheels, flanges, various table segments, transport discs, large dust extraction system, etc. This machine is particularly suitable for simultaneous, parallel surface grinding of workpieces in large series, such as punched parts, piston rings, hydraulic components, etc. Condition: good to very good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice This offers a very rare opportunity in terms of both condition and price. If you require another grinding machine, especially from the manufacturer DISKUS, please send us your inquiry.

Leto izdelave: 1993, stanje: dober (rabljeno), številka stroja/vozila: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feed for 2 workpieces, in good condition Pulling force: 10,000 kg Hodpfx Aocc D Ddjfwsff Broaching length: 1000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5500 x 2800 x 4900 mm Power supply / connected load: 380 Volt, 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a traverse support for 3 broaching stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of the shank and end-piece holders is hydraulic. The machine includes a coolant system with an integrated magnetic chip conveyor, enabling operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale series production. It is in very good condition and still has its original paint. The machine can be inspected under power in our warehouse.