Stroj za rezkanje zobnikov - vodoravni

KOEPFER 170

Stanje: rabljeno, Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.700 mm, pomik osi Y: 2.250 mm, pomik po osi Z: 1.300 mm, skupna širina: 3.000 mm, skupna dolžina: 8.710 mm, skupna višina: 5.250 mm, premer vretena: 130 mm, obremenitev mize: 16.000 kg, dolžina mize: 2.200 mm, širina mize: 2.200 mm, skupna masa: 40.000 kg, Accessories: Nodpfx Ajw Hr Hpodyswb 2 different heads 1 faceplate

Leto izdelave: 1990, Stanje: dober (rabljeno), številka stroja/vozila: 92041, Table clamping surface: 410 x 900 mm Nodpfx Aedhhprsdyjwb Travel paths (X/Y/Z): 560 / 410 / 380 mm Spindle taper: SK 40 Spindle speeds: 22 - 6000 rpm Feed rates: X and Z up to 10,000 mm/min, Y up to 240 mm/min Required space: 2,600 x 2,000 x 2,300 mm Weight: 3,500 kg

Stanje: dober (rabljeno), premer brušenja: 1.600 mm, dolžina brušenja: 6.000 mm, Manufacturer: CINCINNATI Model: 60 x 216 Year of manufacture: 1970 Convex and concave grinding 6 steady rests included 2 hydrostatic steady rests Nedpfxovvvw Ej Adyowb Coolant system with magnetic filter Measuring system with 5-arm caliper: Arm 1: Working range 1300 to 1600 mm Arm 2: Working range 1000 to 1300 mm Arm 3: Working range 700 to 1000 mm Arm 4: Working range 400 to 700 mm Specifications Metric US Standard Centre height: 787 mm Grinding diameter Ø: 1574 mm Grinding length: 5800 mm Grinding wheel dimensions: 914 x 101.6 x 304.50 mm Grinding wheel speed: 1800 rpm Dimensions (approximate): Length: 15100 mm Width: 5500 mm Height: 3550 mm Weight: 120,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Stanje: rabljeno, Leto izdelave: 1961, Ram weight: 750 kg Ram stroke: 660 mm Blow rate: 100 /min Blow energy: 2040 kJ Distance under bolster / lower edge of ram guide: 6600 mm Reach: 750 mm Steel forging – rectangular up to 240 mm Steel forging – diameter up to 270 mm Drive power: 75.0 kW Hammer weight: 16.5 t Nwodpfsvuulljx Adysb Anvil weight: 15.5 t Total weight: 32.0 t Space requirement (W x D x H): 3.2 x 1.45 x 3.45 m Forging hammer Operating principle: pneumatic Can only be offered in our warehouse without commissioning – video from the seller available before disassembly.

Stanje: dober (rabljeno), Wheel diameter – max. 180 mm Wheel width 58 mm Module – max. 4 Module – min. 0.5 Strokes per minute 200 – 710 Total power requirement 3 kW Machine weight approx. 3 t Good condition, change gears, etc. Nodpfx Aeuayw Sodyswb Year of manufacture approx. 1964

Stanje: rabljeno, Leto izdelave: 1969, Grinding length: 500 mm Grinding width: 200 mm Nsdpfxst Hwzio Adyswb Workpiece height: 250 mm Total power requirement: 5.5 kW Machine weight approx.: 2,500 kg Required space approx.: m J U N G Horizontal Precision Surface and Profile Grinding Machine Model: HF 50 RD Year of manufacture: approx. 1969 Machine No.: 4082 Maximum grinding length: 500 mm Maximum grinding width: 200 mm Table size: 600 x 200 mm Table speed: 1 – 20 m/min Working height under grinding wheel: approx. 350 mm Grinding wheel dimensions: 225 x 25 x 51 mm Grinding wheel speed, stepless: 1,000 - 4,500 rpm Vertical infeed: 0.001 - 0.01 mm/stroke Grinding spindle drive, stepless: 0.5 to 1.5 kW Total drive: approx. 6 kW - 380 V – 50 Hz Weight: approx. 2,500 kg Accessories / Special Equipment: • This design is particularly suitable for grinding high-alloy tool steels, thanks to the stepless speed range. • Automatic infeed of the grinding slide for both surface and profile grinding tasks, with automatic infeed stop via dial gauge, plus dial indicator mount and dial gauge for height control. • Machine configurable for standard grinding method with and without infeed, with continuous cross feed or table reversal, or for plunge grinding without traverse. • Manual straight dresser mounted above the grinding wheel • Built-on permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separate wet grinding unit with coolant tank and band filter • Separate converter cabinet for stepless speed regulation and cutting speed display • Approx. 3 flanges with and without grinding wheels, motorized rapid grinding head traverse Condition: Good – ready for demonstration under power, partially overhauled by professional company (piston rods, lubrication, infeed, dresser, bellows, etc.) Delivery: Ex-stock – as inspected Payment: Net – upon receipt of invoice

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), Centre distance: 400–800 mm, spindle speed: 1000–2700 rpm, workpiece diameter: 10–300 mm, grinding wheel diameter: 40–300 mm, swiveling range: -45 to 45°, length: 3000 mm, width: 2500 mm, height: 2275 mm, equipped with Hoffmann oil mist separator (new filter inserts), Faudi gravity band filter system, hydraulic unit, additional grinding head for worm wheel grinding, grinding arbors with diameters 50, 40, 27, 22 mm, holders for SK40 and MK5, driver sets for various clamping diameters, operating manual, circuit diagrams in paper form, inspection is possible. Nwodorgahxjpfx Adysb

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments Nwsdpfxoqt Dmyo Adyjb - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: rabljeno, Leto izdelave: 2011, 2000/2200 KVA pri 50 Hz 2500/2750 KVA pri 60 Hz Moč (KVA): 2500 Delovne ure: 46 Frekvenca: 60 Hz Napetost: 3300 V Nwedpfew Imddex Adyjb

Stanje: rabljeno, Leto izdelave: 1986, Grinding diameter: 350 mm Grinding length: 600 mm Center height: 175 mm Very well-maintained machine. The machine comes from a precision grinding workshop in the Black Forest. It can still be inspected under power at the seller’s site for a short time. In 2022, the machine underwent partial overhaul and maintenance at our facility, including geometry restoration according to the manufacturer’s protocol. Nwsdpfx Adev Tqqnoysb Equipment: - 2-axis FAGOR digital readout - Sine bar - Tailstock with fine adjustment - Hydraulic tailstock - Face grinding attachment - Internal grinding attachment - Internal grinding spindle Fischer UJ70 - Paper band filter - Automatic cycle: roughing – finishing – spark out – return