Horizontalna kotna tračna žaga - HB 380 L

Knuth HB 380 L

Stanje: novo, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650x450 mm Kljdpjd Iipmsfx Af Njl Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL PRICE!!! 2-Column Double Mitre Band Saw K-tech DG 62/45 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed control, and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning/disinfection) • Energy-efficient and low-vibration due to angled cutting • Ergonomic, safe, and free-standing control panel • Frequency-controlled blade drive 15-100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Oversized drive wheels (520 mm each) • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid approach down to start of material, or commence series cutting 4. Switch off saw blade 5. Raise frame just above the material 6. Vise opens

Leto izdelave: 2025, Stanje: novo, - Drum diameter: 1600 mm - Drum length: 2880-3880-4880 mm - Working length: 2000-3000-4000 mm - Screen openings as per your specifications - The screen is made of closed profile - A cleaning brush with a diameter of 300 mm is mounted on the screen along the entire working length Ksdeq T Sp Hspfx Af Nell - Flat bar paddles installed in the center of the drum allow material discharge - Drum rotation speed approx. 11.5 revolutions per minute - Screener feed via gearmotor – Drum transmission via gearmotor + 2 drive rubber wheels, diameter 230 mm - Screener equipped with electrical control panel - Drop feed hopper, dimensions: Width 1600 mm, Length 1400 mm, Height 1200 mm - 12 months warranty - Made in Europe - CE compliant

Stanje: zelo dobro (rabljeno), The fully hydraulic high-speed production band saw is equipped with a universal hydraulic system for exclusive or alternating cutting of thin- and thick-walled profiles as well as solid materials, all without changing the saw blade, thanks to a uniform tooth pitch of 3 or 4 teeth per inch. The machine features a pre-tensioned saw frame guide, enclosed oil hydraulics, triple swivel bearing, separate coolant system, steplessly adjustable hydraulic cutting pressure, lifting movement and accelerated return stroke, and is standard-fitted with a stepless mitre setting device. The saw frame can be lifted in rapid traverse mode. A pivoting vice ensures optimum utilization of the saw blade. Longitudinal guidance with ground and hardened guide rails transfers the cutting forces to the saw frame. Automatic end stop. Push-button control for ON/OFF functions and rapid traverse of the saw frame. Kledpfxjxdwbke Af Nol Manufacturer: KASTO Type: PSB 280 U Drive power: 2.2 kW Stroke frequencies: 40/51/64/80/102/128 strokes/min Cutting speed: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: hydraulic Cutting range round: 280 mm yCutting range flat: 280 x 150 mm Mitre range: 0-45° Material support height: 600 mm Weight: 650 kg Length/width: 1500 x 600 mm Height: 1000 mm Saw blade dimensions: 450 x 40 x 2 mm Year of manufacture: 1988 Accessories: coolant system, rapid lowering, rapid lifting

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 5 kW (6,80 KM), vrsta goriva: električni, lastna masa: 4.200 kg, Leto izdelave: 2024, fill hopper with trough Kljdpfeuqynmox Af Njl hopper capacity 10.5m³ S355 / St52-3 vibrating chute with 10mm Hardox 450 wear plate chute fully stress-relieved annealed 2 x unbalanced motors 2.5kW each NEW

Stanje: novo, The SBS 255 is a powerful, semi-automatic bandsaw from the category of horizontal mitre band saws, distinguished by its compact design and versatile features. Equipped with a sturdy, laterally adjustable vise and a robust grey cast iron saw frame which can be swiveled up to 60° to the right and 45° to the left, the SBS 255 enables precise cuts in various workpiece sizes. The powerful motor of this machine is designed for continuous operation, while the combination of carbide jaws and adjustable ball-bearing guides ensures high cutting accuracy. The efficient coolant system and quiet operation further enhance productivity, especially when processing small batches. You can take advantage of the convenient design and ease of use of the SBS 255 to complete your work efficiently. Supplied with comprehensive standard accessories, such as a saw blade and stand, this machine is ideal for your workshop. If you are interested in the SBS 255, you can now request a quote. Klsdpfxsuyiqds Af Nel

Stanje: novo, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic sawing process with clamping–cutting–saw frame lifting to preset height after completion of the cut. Infinitely variable hydraulic monitoring of cutting pressure and feed rate at the saw band guide. This ensures optimum conditions for any sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles. Particularly suitable for universal use with varying cross-sections, materials, and frequent miter cuts. The machine control system complies with CE standard 89/289. Technical Data: Cutting range in mm round/flat 90° 325 / 500 x 300 Klsdpfot D Azcex Af Njl 45° 300 / 300 x 300 30° 200 / 200 x 200 45° 300 / 300 x 300 Rapid approach of the saw frame to the material edge via pushbutton Manual miter adjustment from 45°–90°–30°, infinitely variable on scale The miter pivot point is the intersection of the saw band and fixed jaw, so there is no change in length measurement when the angle changes Hydraulic full-stroke workpiece clamping – CETOP hydraulic system At every saw frame angle, the material is clamped parallel at 90° Complete coolant system with electric immersion pump Central machine operation Saw band drive with automatic end-stop Movable band guiding arm, adjustable to material width Saw band idler wheels with carbide guides Chip removal brush, rotating with the band Saw band tensioning with torque wrench Paint finish: silver grey/blue grey (RAL 7001/ RAL 7031) Minimum remnant length: 60mm Cutting speed: AC frequency controlled drive, adjustable from 15-150 m/min steplessly at the control panel Drive motors: Saw band: 3.0kW; 400V, 50Hz Hydraulics: 1.1kW Coolant pump: 0.1kW Saw frame feed: Infinitely variable up to 300mm/min, hydraulically controlled Saw blade tension: mechanical with torque wrench Saw blade dimensions: 4200x34x1.1mm Working height: 750mm (without base elements) Weight: 850kg Dimensions (LxWxH): 1450x2350x1350mm

Stanje: novo, The SBS 355 is a powerful, semi-automatic band saw in the category of horizontal mitre band saws from KNUTH. This universal workshop band saw combines a compact design with a swiveling saw bow, which can be pivoted both to the right up to 60° and to the left up to 45°. The sturdy, laterally movable vice enables precise cuts thanks to its large stroke and long guides, while the one-piece cast iron saw bow ensures torsional rigidity. The machine offers efficient machining options for various materials and profiles thanks to hydraulic workpiece clamping and steplessly adjustable saw blade speed. Standard equipment includes a saw blade, a coolant device, and a robust base frame. With the SBS 355, you are choosing a robust and versatile solution in the category of semi-automatic band saws. Order now or request a quote to learn more about this reliable band saw. Kedpfjuy Ii Ejx Af Noll

Stanje: novo, Cutting capacity at 90 degrees: round 500 mm Cutting capacity at 90 degrees: square 420 mm Cutting capacity at 90 degrees: rectangular 600 x 400 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 805 mm Total power requirement: 3.0 kW Machine weight: approx. 1.45 t Space requirement: approx. 1.72 x 2.5 x 2.5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • Miter angle left & right up to 60° • Frequency-controlled saw drive • 34 mm blade height • Wear-free, ball-bearing mounted swiveling material support table • Saw blade guides adjustable via extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates Kljdoupxupspfx Af Nsl • 2 integrated support rollers left and right • Removable chip tray (for cleaning/disinfection) • Free-standing, safe and ergonomic control panel • Storage space for saw blades and consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Super-fast pre-tensioning (front loading) • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Minimum cutting diameter round from 10 mm Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid feed down to material or, for serial cutting, direct cutting 4. Switch off saw blade 5. Raise frame just above material 6. Open vise

Stanje: novo, Leto izdelave: 2026, For sawing pipes and solid materials made of stainless and tool steel - Two band speeds via pole-changing motor - Robust gearbox with hardened and ground shaft - Precise and durable band guides with adjustable carbide inserts - Longer service life for the saw blade thanks to 25° saw arm inclination - Efficient coolant application directly at the saw blade guides - Electromechanical saw blade tension monitoring: A microswitch automatically shuts down the machine in case of deviations - Chip removal brush for optimal cleaning and maintenance of the saw blade Semi-automatic operation: - Automatic workpiece clamping after starting the cutting cycle - Executing the saw cut with the selected band speed - Automatic stop of the downfeed motion and the saw blade at the lower end position - Automatic return of the saw arm to the upper home position - Vise opens automatically - Operator only needs to reposition the material Equipment features: - Two band speeds - Cutting probe - Coolant system - Chip removal brush - Saw blade tension monitoring - Swiveling control panel Dimensions: - Length: approx. 1860 mm - Width/Depth: approx. 1045 mm - Height: approx. 1750 mm - Weight: approx. 405 kg Drive power: - Rated power: 1.5 kW Electrical data: - Supply voltage: 400 V Machine data: - Saw blade speed(s): 20 - 100 m/min - Speed adjustment: stepless - Saw blade length: 2720 mm - Saw blade width: 27 mm - Saw blade thickness: 0.9 mm - Mitre angles: +60° to -45° Cutting capacities: - 0° round (tube): 230 mm - 0° round (solid): 150 mm - 0° rectangle horizontal (hollow section): 280 x 180 mm - 0° bundle (tube): 180 x 120 mm - -45° round (tube): 195 mm - -45° round (solid): 110 mm - -45° rectangle horizontal (hollow section): 180 x 170 mm - -60° round (tube): 125 mm - -60° round (solid): 80 mm - -60° rectangle horizontal (hollow section): 120 x 100 mm - +45° round (tube): 185 mm - +45° round (solid): 110 mm - +45° rectangle horizontal (hollow section): 180 x 120 mm Feed: - Table height for material infeed: 785 mm - Min. remaining workpiece length: 22 mm Kedpfx Afed Hx Uqo Nell

Stanje: rabljeno, Leto izdelave: 2002, številka stroja/vozila: 021203, Názov stroja: Mega Saw Ksdpfx Aewxmhlsf Njll Model stroja: H1830 s.n. 021203 Špecifikácia: Rok výroby 2002 Hlavný motor: 3,7 kW Polautomatický režim Rýchlosť pásu: 82–250 FPM (variabilná) Plynulé nastavenie rýchlosti Maximálny prierez rezu: 460 mm Integrovaná nádrž na chladiacu kvapalinu s čerpadlom a šnekovým dopravníkom Ručný zverák