Konvencionalni rezkalni stroj - FPK 4.3

Knuth FPK 4.3

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition Technical Data: • Year of manufacture: 1980 | Machine No. 2201-5045 Kwodpfx Absu Dm E Hebst • Fixed angle table • Spindle speed: 25 - 2,500 rpm • Infinitely variable feed rate on all 3 axes • Rapid traverse on all 3 axes • Motor power: 2.0 / 4.0 kW • Spindle brake • Travel (X/Y/Z): 500 / 300 / 400 mm • Vertical milling head movable on spindle head by 200 mm • Extendable vertical and horizontal quill – SK40 • Drawbar system M16 • Weight: approx. 1,500 kg Equipment and Accessories: • 3-axis Aktiv Digital Readout (Heidenhain, latest version) • Coolant system • Central lubrication system About the Machine: Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Stanje: rabljeno, Leto izdelave: 1989, Universal tool milling machine Brand: DECKEL Model: FP 1 Aktiv Kedpfx Aor En Dyobbswt Year of manufacture: 1989 – workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function on X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating manual Used, sold as seen, without warranty The technical condition of the machine corresponds to the standard of its year of manufacture.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 repowered by FPS, year of manufacture 2013, with 3-axis Heidenhain ND 780 digital readout, as new condition!! Technical Data: >> Machine No.: 2202-7020, FPS No.: 3364, year: 2013 >> Rigid angle table Kwsdpovbifgefx Abbot >> Spindle speed: 40 – 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK-40 >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and Features: >> 3-axis Heidenhain ND 780 digital readout >> Brake motor with immediate spindle stop >> Centralized lubrication >> 2x emergency stop >> Operating manual >> Coolant system About the Machine: For sale is a universal milling machine Deckel FP2, repowered by FPS, in as-new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine features an electrical centralized lubrication system and two emergency stop switches for added safety. As of 2013, both mechanically and electrically tested. The Heidenhain digital readout simplifies work and ensures even greater precision. Take the opportunity to inspect and test the Deckel under power on site. The machine is available immediately.

Stanje: novo, Leto izdelave: 2025, Overhauled, as-new machine, modernized to meet the legally required safety standard “state of the art” according to operational safety regulations of the professional associations. Control Cabinet Electronics Installation of a new CE-compliant control cabinet in accordance with the latest statutory regulations of the professional associations: BGVA 3 / DIN EN 60204-1 new machine standard. Optional: complete machine in CE execution. A CE declaration of conformity will be issued for the machine, making FPS Werkzeugmaschinen GmbH the legal manufacturer. This ensures the machine complies with the OPERATING SAFETY REGULATION (BetrSichV). The machine’s year of construction is considered to be the delivery date. Standards applied: EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1. Control 3-axis FPS Aktiv digital display Speed 25 - 2500 rpm, geometrically stepped direct gearbox with 18 speed stages for maximum torque / milling performance Feed 5 to 500 mm/min, infinitely variable Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 100 mm, SK40 with M16 drawbar thread optional: with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z: 800 / 300 / 400 mm Table Rigid angle table, 1000 x 440 mm, load capacity 2000 kg Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° Kodpfjh Sptnjx Abbowt Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc.

Stanje: skoraj kot novo (rabljeno), Donau Donauflex 135 hitrohodni radialni vrtalni stroj Proizvajalec: Donau Tip: Donauflex 135 Leto izdelave: 2020 Stanje: Zelo dobro, rabljen, a kot nov Takoj na voljo iz zaloge. Kjdoxcyz Rspfx Abbswt

Stanje: zelo dobro (rabljeno), Leto izdelave: 1975, O F F E R We can offer you, without obligation and subject to prior sale, the following from stock: DECKEL Universal Tool Milling Machine Type FP 2 Year of Manufacture ca. 1975 _____ Table travel: longitudinal motor/manual 390 / 400 mm vertical motor/manual 390 / 400 mm cross motor/manual 190 / 200 mm Fixed angle table 250 x 700 mm Installation height under spindle 400 mm Spindle overhang (quill travel) approx. 165–465 mm Spindle taper SK 40 18 spindle speeds 40–2,000 rpm Infinitely variable feed rate 5–400 mm/min Rapid traverse 1,200 mm/min Spindle drive 2.2 kW Total drive power 2.5 kW - 380 V - 50 Hz Weight 1,000 kg Accessories / Special Equipment • DECKEL universal swivelling angle table approx. 250 x 700 mm, mounted • Original DECKEL universal dividing head with tailstock and faceplates • Original DECKEL high-speed vertical milling head with separate drive • Large original DECKEL tool cabinet for storing the above accessories and various arbors, approx. 30 assorted collets, various milling tools, several arbors, etc., as well as operating tools, separate control cabinet, coolant system Condition : very good – demonstration-ready, ideal for training workshops/education Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice Constantly available: further DECKEL FP 1 / FP 2 / FP 4 milling machines and, of course, additional accessories such as spiral milling attachments also in stock Kwedpfsxzk Irjx Abbet

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm From spindle centre to underside of counter support: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal rapid traverse: 4000 mm/min Cross rapid traverse: 4000 mm/min Vertical rapid traverse: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55–3000 Head, swivelling: 0–140° Spindle feed Quill diameter: 90 mm Quill travel: manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF SUPPLY Kwodjwuurwepfx Abbjt Includes (non-exhaustive list): - ABENE milling machine - Heidenhain control - Tool holder set - Coolant pump - Leveling feet - Mounting block - Complete operating documentation Exact scope of supply as per photo series

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 480 mm, pomik po osi Z: 310 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, poteza s peresom: 120 mm, skupna višina: 1.820 mm, skupna širina: 1.780 mm, skupna dolžina: 1.400 mm, širina mize: 500 mm, dolžina mize: 900 mm, teža obdelovanca (maks.): 190 kg, razdalja od mize do središča vretena: 390 mm, Oprema: dokumentacija / priročnik, Table surface (swivel table): 900 x 500 mm Kjdpfxshu Rwfs Abbswt Max. workpiece weight: 190 kg Travel X: 600 mm Travel Y: 450 mm Travel Z: 380 mm Quill travel Z1: 120 mm Speed range: 40 - 2000 rpm Gear steps: 18 Drive power: 3.75 kW Tool taper: SK 40 (DIN 69871A) Weight approx.: 1,560 kg including extensive standard accessories, such as: Work area enclosure 3-axis digital readout CONTUR Hydraulic tool clamp for vertical spindle, tool holder SK 40, DIN 69871A, pull stud DIN 69872, incl. hydraulic unit Monitored spindle guard 3 pcs. conventional handwheels Complete electrical equipment for three-phase 400 V, 50 Hz Ball screw spindles for X, Y, and Z axes Vertical milling head Fixed swivel table, 900 x 500 mm clamping surface Swiveling mechanism for vertical milling head LED machine light Protective bellows for vertical and horizontal guideways Automatic central lubrication for axes and ball screw spindles Coolant system with pump Set of 4 mounting elements Including tool holder package consisting of: 1 x ER40 collet chuck 7 x collets (Ø 6, 8, 10, 12, 16, 20, 25 mm)

Stanje: novo, Leto izdelave: 2023, Sheet width: 1540 mm Sheet thickness: 4 mm Top roller diameter: 110 mm Lower roller diameter: 110 mm Bending roller diameter: 110 mm Total power requirement: 1.1 kW Machine weight approx. 0.9 t Space requirement approx. 2.5 x 0.6 x 1.1 m Kodpfx Asvx Uvxobbewt New machine Conical bending device, hardened and ground rollers, motorized bending roller, stationary control panel, digital display for right and left bending rollers, digital display for lower roller

Stanje: novo, Fastech Horizontal Bandsaw Semi-Automatic BMSY 360 DGH ECO Round cutting capacity (mm): 360 Flat cutting capacity (mm): 510 x 360 Square cutting capacity (mm): 360 +30° round cutting capacity (mm): 360 +30° flat cutting capacity (mm): 440 x 360 +30° square cutting capacity (mm): 360 Kwsdpsg Ekttofx Abbst +45° round cutting capacity (mm): 360 +45° flat cutting capacity (mm): 390 x 360 +45° square cutting capacity (mm): 360 +60° round cutting capacity (mm): 200 +60° flat cutting capacity (mm): 200 x 360 +60° square cutting capacity (mm): 200 -30° round cutting capacity (mm): 360 -30° flat cutting capacity (mm): 440 x 360 -30° square cutting capacity (mm): 360 -45° round cutting capacity (mm): 360 -45° flat cutting capacity (mm): 390 x 360 -45° square cutting capacity (mm): 360 -60° round cutting capacity (mm): 260 -60° flat cutting capacity (mm): 260 x 360 -60° square cutting capacity (mm): 260 Main drive motor output (kW): 3 Hydraulic pump power (kW): 0.37 Coolant pump motor power (kW): 0.12 Infinitely variable band speed: 20-100 m/min Saw band dimensions (mm): 4800x34x1.1 Table height (mm): 860 Weight (kg): 1,450 Length / Depth / Height (mm): 2,650 / 1,210 / 1,870 Double-mitre bandsaw Infinitely variable band speed Hydraulic vice Heavy-duty gearbox Hydromechanical saw blade tensioning Saw blade cleaning brush Digital mitre angle display