Stropno dvigalo, dvoranski žerjav, tirnica 14260mm

ABUS Hallenkran Brückenkran Kran ELV 5t ELK 5000Kg 5t Funk Portalkran Kran

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 620 h, Funkcionalnost: popolnoma funkcionalen, Kaeser Aircenter SM13-11 Screw Compressor (2021) Manufacturer: Kaeser Model: Aircenter SM13-11 Year of manufacture: 2021 Condition: Very good, used Operating hours: 1,356 h Load hours: 606 h Next service at: 2,825 h Technical specifications Nwjdpfx Agjxnnd Re Tec Pressure: 11 bar Effective delivery rate: 1.08 m³/min Rated motor power: 7.5 kW Motor protection class: IP 54 Power supply: 400 V / 3 phase / 50 Hz Dimensions (W x D x H): 630 x 1200 x 1716 mm Weight: 400 kg Compressed air receiver: 270 l Compressed air connection: G 3/4 Sound pressure level: 64 dB(A) Refrigeration dryer Power consumption: 0.26 kW Pressure dew point: 3 °C Pressure drop: 0.2 bar Refrigerant: R 134a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment EN 60204-1: Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5 m power cable with 32A plug

Leto izdelave: 2022, Stanje: novo, Altendorf WA 6 Manual height adjustment, Double roller carriage, length 2000 mm Scoring unit, Nodpfx Ageihahmo Tjwc tiltable, Extension table, Mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Tilting range: 0 - 45°, Cutting width at rip fence: 1,000 mm, Maximum cutting height: 87 mm, Maximum saw blade diameter: 315 mm, Mitre fence tilting range: up to 49°, Speeds: 4,200 rpm, Main motor power: 5.5 HP / 4 kW, Scoring motor power: 0.5 HP / 0.37 kW, Working table height: 910 mm, Extraction port diameter: each 1 x 100 / 50 mm, Weight: 450 kg Large extraction hood Location: Available from stock 54634 Bitburg - immediately available - Location: Available from stock 54634 Bitburg - free loaded - - immediately available -

Leto izdelave: 2010, Stanje: zelo dobro (rabljeno), Kammer innen: 2000 x 1250 x 1250 mm Innenvolumen: 2344 Liter Temperaturen bis zu 400 °C (Leistung: 33 kW) Nwjdpfx Agsuqkwfo Tsc Vortemperieren / Trocknen für manuelle, zyklische und CNC-Bearbeitung bis hin zur interaktiven Konturprogrammierung Abgedeckte Führungsbahnen (DGP) für dauerhaft hohe Präzision Direktantrieb vom Motor zur Hauptspindel für besonders ruhigen Lauf Umlaufschmierung mit Filterung zur Schmierung des Präzisions-Hauptspindellagers Kombinierte Steuereinheit für wirtschaftlich vorteilhaftes Programmieren und Bedienen der Maschine sowie optimalen Zugang zum Arbeitsbereich Länge: 2500 mm Breite: 2015 mm Höhe: 2900 mm Gewicht: 4000 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna višina: 5.850 mm, skupna dolžina: 12.125 mm, skupna širina: 5.150 mm, skupna masa: 8.000 kg, trajanje garancije: 12 meseci, notranja višina: 5.000 mm, notranja dolžina: 12.000 mm, notranja širina: 5.000 mm, Oprema: kabina, osvetlitev, PAINT SPRAY BOOTH 12x5x5M EZ Series Model: - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: - 2x supply air fans - 2x exhaust air fans TECHNICAL SPECIFICATIONS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance gates: 4000x4800 mm (2 units, four-winged, with reinforced hinges) - Additionally, a BOX measuring 1650 mm x 8000 mm must be taken into account – can be positioned on the right or left side. - Construction: galvanized steel frame structure - Heat exchanger: high-quality stainless steel - Panels: filled with mineral wool - Drive-on ramps – 2 units - Fully grated floor The reinforced frame structure prevents vibrations and the air surge effect from the main supply air duct. Double-layered roof design: - Outer top layer - Inner truss construction with V600 ceiling filter Air circulation system: - Supply air system: jet turbine 7.5 kW – 2 units - Exhaust air system: jet turbine 7.5 kW – 2 units Air filter system: - Pre-filter captures particles >10 μm - Ceiling filter captures particles >5 μm - Floor filter: Paint Stop - Activated carbon filter Lighting: - Ceiling lighting: 52 LED fluorescent tubes (14 slanted fixtures, each with 4 tubes) - Side lighting: 26 LED panels integrated in the right, left, and rear walls Burner: Riello – 2 units, Oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heating-up time: 8–15 min. (max. 80°C) Nwsdpfx Agjxm U Exs Tec Optional equipment: - Boxes on the booth roof - Insulated roof - Pass-through doors - Water wall - Paint finish according to RAL color chart - EX version (explosion-proof) available

Stanje: novo, Panel Saw ALTENDORF WA 6 - Exhibition Machine - manual height adjustment, double roller carriage, scoring unit, tiltable, outrigger table, angle-mitre fence, automatic brake, can be lowered below table height ----- Technical Specifications ----- tilt range: 0 - 45°, cutting length: 2,500 mm, cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade diameter: 315 mm, mitre fence tilt range: up to 49°, speeds: 4,200 rpm, main motor power: 5.5 HP / 4.0 kW, scoring motor power: 0.5 HP / 0.37 kW, table height: 910 mm, Njdpfxeu R Sx Ee Ag Tswc dust extraction port Ø: 1 x 100 / 50 mm each, weight: 450 kg - new exhibition machine -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm From spindle centre to underside of counter support: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal rapid traverse: 4000 mm/min Cross rapid traverse: 4000 mm/min Vertical rapid traverse: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55–3000 Head, swivelling: 0–140° Spindle feed Quill diameter: 90 mm Quill travel: manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF SUPPLY Nwodpfx Agowuurws Tsc Includes (non-exhaustive list): - ABENE milling machine - Heidenhain control - Tool holder set - Coolant pump - Leveling feet - Mounting block - Complete operating documentation Exact scope of supply as per photo series

Stanje: rabljeno, prevoženi kilometri: 962.877 km, dvižna višina: 20.000 mm, Leto izdelave: 2007, obratovalne ure: 1 h, Pogon: kolo Lastna teža: 25.460 kg Dvižna zmogljivost: 14.800 kg Serijska številka: 970090 / 5127349 Stanje prednjih pnevmatik: 80% Nodpfx Agexwim Es Tewc Stanje zadnjih pnevmatik: 80% Transportne mere (D x Š x V): 0x0x0 Za dodatne informacije kontaktirajte PFEIFER GROUP.

Stanje: kot nova (razstavni stroj), Used/refurbished hoist motor for a DH wire rope hoist Njdpfoh Up U Dsx Ag Towc ATTENTION! We have more than 15,000 Demag parts in stock. For further information, please visit our website or see our other listings.

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 295.000 km, moč: 405 kW (550,65 KM), prva registracija: 10/2015, vrsta goriva: dizel, konfiguracija osi: 6x2, gorivo: dizel, zavore: zaviranje z motorjem, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2015, obratovalne ure: 1.828 h, Oprema: električno nastavljivo ogledalo, klimatska naprava, spojka prikolice, = Dodatne možnosti in oprema = - Aluminijast rezervoar za gorivo - Ojačevalnik zavor - Nizka raven hrupa - Zračno vzmetenje - Sončna zaslonka - Ksenonska razsvetljava - Kardanska gred (PTO) Nwjdpfx Aew Rc E Aeg Tjc - Vlečna kljuka = Dodatne informacije = Konfiguracija osi Sprednja os: Krmiljena Zadnja os 1: Krmiljena Teže Lastna teža: 18.505 kg Nosilnost: 11.070 kg DGV: 29.500 kg Funkcionalno Dimenzije tovornega prostora: 420 x 255 cm Dvigalka: Da Znamka nadgradnje: Palfinger PK 53002-SH G CE označba: da Stanje Tehnično stanje: zelo dobro Videz: zelo dobro Finančne informacije Cena: Na povpraševanje

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1988, - Completely overhauled in 2022 - Heidenhain TNC320 CNC control system - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gear transmission - Automatic clamping on X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct path measurement - Collision protection coupling on Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools & tool trolley Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (cross): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually adjustable on spindle carrier: 150 mm Main drive: - Pole-changing three-phase brake motor: gear transmission with forward/reverse - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: disc spring assembly - Tool release: hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z axes: 1 DC motor - Ball screw spindles: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm Nwedpfewhk Ubex Ag Tjc - Permissible load: approx. 600 kg Installation: - Footprint (including safety area): approx. 2300 x 2500 mm - Machine weight incl. vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²