Vrtalni stroj za luknjice 15 vretena

Knoevenagel

Stanje: dober (rabljeno), Gang drilling machine, multi-spindle drilling machine Dedpfxjb A Iy Te Aplokl - 4 motors (1 motor defective) - pneumatic clamping - drilling depth approx. 30 mm - max. drilling distance: 1000 mm - drive: 0.36 kW, 2800 rpm - weight: 280 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, številka stroja/vozila: 06 61 218, Ref. No.: Lg 32821 Single-Sided Decoiler BBT ABH 2000/400 Exhibition machine, unused Machine No.: 06 62 218 Year of manufacture: 2021 Technical Data Dkedpfx Apsg U Utvslel Load capacity approx.: max. 2,000 kg Strip width: max. 400 mm Inner coil diameter: approx. 450 to 520 mm Outer coil diameter: max. 1,500 mm Unwinding speed: approx. 2 to 15 rpm Equipped with adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase gear motor. Expansion of carrying segments manually via hand crank and joints Number of carrying segments: 3 Coil lateral guidance achieved by robust, lockable boundary arms. Decoiler stand constructed in heavy-duty box design, fabricated as welded assembly. Additional Equipment: Shutdown for "loop too small" via antenna switch, mounted on the column of the base housing of the loop control. Height infinitely adjustable. Strip side guide on the base housing of the loop control, via lateral guide rods. Pass-through width infinitely adjustable.

Stanje: dober (rabljeno), Throughfeed line for processing door leaves, high-performance machine, processing of one leaf—lock case, handle, and hinges—in approximately 30 seconds. The machine consists of two units, each with a left and right section performing specific operations. In the first unit, the left section mills the faceplate recess for the lock and drills holes for the handle and key; simultaneously, the right section drills the hinge holes. In the second unit, the left section makes and deepens the lock pocket, while at the same time the right section installs the hinges. Djdpfx Asuq Scpeplskl

Stanje: novo, Leto izdelave: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with reversible rotation (right/left) Large-dimensioned cast iron milling unit, mounted directly on the table With extraction hood beneath the worktable for improved dust removal Solid and precise cast iron table Quick and effortless speed changes High-performance 5.0 kW motor Standard safety hoop guard Quality made in Italy Equipment details Cast iron milling unit: Mounted directly on the milling table Milling spindle mounted high with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful motors Equipped with a robust three-phase motor Milling protection The standard milling guard comes with a height-adjustable guide rail and protective plate for maximum safety Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw Integrated extraction port ensures clear visibility Table opening A large table opening enables the use of larger panel raising cutters as well as tenoning and slotting tools both above and below the table Safety hoop guard Supplied as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap Enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx.: 240 kg Extraction Extraction port diameter: 2 x 120 mm Worktable Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation details Required space length: 1,945 mm Machine body width/depth: 575 mm Required space width/depth: 920 mm Working area length: 1,600 mm Note on space requirements: The specified dimensions take into account the maximum travel or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Note on working area: Please add the specified measurements to the required space to obtain the recommended free area for the machine. Electrical data Supply voltage: 400 V Drive motor power: 5.0 kW Network frequency: 50 Hz Milling spindle Usable spindle length: 100 mm Spindle speed(s): 3,500 / 7,000 / 10,000 rpm Spindle projection max. above table: 130 mm Spindle shaft diameter: 30 mm Milling tool diameter, max. Max. lowerable tool diameter: 180 mm SCOPE OF DELIVERY Safety hoop guard Aluminium fence jaws Table extension left and right Dodpfshp Rcrox Apljkl Extendable workpiece support

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), For sale: Costa A1 ACT 1150 bottom sander, year 2001. Configuration: soft drum with electronic segmented pad. Working width: 1150 mm Abrasive belt dimensions: 1180 x 2620 mm Pressure rollers for short workpieces. Dkjdpfogq U R Nox Aplsl Vacuum fan included. Air blow-off on both units. Total weight: 2500 kg Two motors: 7.5 kW and 15 kW Total power: 27 kW Condition: very good, regularly serviced machine. Available immediately.

Stanje: rabljeno, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm, Width: approx. 80 – 240 mm, Finger joint length: 400 – 1,500 mm, Finished length: 2.50 m – 13.50 m stepless. Consisting of the following components: - SMB vacuum destacking unit (longitudinal) with 2 lift tables and 2 package roller conveyors, year 2013, max. package dimensions 1.20 x 1.20 x 6.00 m, 4 suction pads, Sicko system; singling and feeding onto roller conveyor for scanner, board turner, diverter for too wet/too dry, diverter for B-quality, marking station or automatic mode - Bidac end-grain scanner for detecting cupping, year 2013 - Brookhuis moisture measurement FMI 5, year 2019 - Microtec scanner Goldeneye 502, year 2012, with X-ray, 4 colour cameras, and new optimization software - Dimter Opticut 350-2, year 2003 with paddle ejector (retrofit 2009) and associated sorting belts, pneumatic ejector for 2 additional qualities Dedpfovvi Tysx Apljkl - NKT packaging unit - NKT finger jointing system with rotary table Special Pack AH 1050, year 2005, consisting of: milling machine, tilt station, feed track length 5.0 m, cycle press length 6.00 m, cross-cut saw - SMB stacking machine, year 1998, 2.50 – 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m), 8 stacking arms, 8 manual stacking blades, infinitely adjustable stop electro/hydraulic, package width max. 1200 mm, package height max. 600 mm, hydraulic package pusher Location: at customer site

Stanje: rabljeno, incl. various slot and tenon discs Djdpfx Apsvwffzelekl used, good condition Manufacturer: Festo Type: ZA 101 Machine No.: 2668/S Number of spindles: 3 + cross-cut saw Clamping height: 1 x 140 mm + 2 x 30 mm Cross-cut saw: 2.5 HP Stop ruler LAS 1750 mm + 1000 mm with turret stop Workpiece clamping: pneumatic Space requirements: approx. 1700 mm x 700 mm x 1400 mm Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-is condition, as inspected without warranty or guarantee

Leto izdelave: 1975, stanje: rabljeno, Wheel Diameter – max. 280 mm Number of Teeth – max. 100 Module – max. 6 Module – min. 1 Total Power Requirement: 6 kW Machine Weight: approx. 2,500 kg Space Requirement: approx. __ m H U R T H Automatic Gear Edge Milling Machine for universal use in deburring and chamfering gears Model: ZK 7 - Year of Manufacture: 1975 Serial No.: 26 000 _____ Max. Workpiece Diameter: approx. 280 mm Workpiece Length: approx. 200 mm Module Range for Deburring: 1-6 module for Simplified Shifting: 1-4 module Workpiece Tooth Count: 6 - 100 Workpiece Spindle Bore: 102 mm Horizontal Adjustment of Workpiece Head: approx. 340 mm Vertical Adjustment of Milling Slide: 180 mm Dkodot Hw Dkepfx Aplsl Swiveling Range of Milling Slide: 105° Traverse Adjustment of Milling Slide: approx. 300 mm Cutter Speeds: 250-2,800 rpm Cutter Stroke Rates: 30–210/min Adjustable Cutter Stroke: 6–12 mm Milling Spindle Taper: 40 SK Total Drive: approx. 6 kW – 380 V – 50 Hz * Weight: approx. 2,500 kg Accessories / Special Equipment: • Electric workpiece clamping device with collet chuck setup, facility for expanding mandrels, and standard workpiece holder, extensive clamping devices included. Foot switch for clamp release. • Mechanical indexing device for tooth numbers, with approx. 20 different indexing plates • Adjustable tooth gap-centering device mounted on the workpiece head • Mechanical collet adapter installed on the tool head for various cutter diameters and types (profile/face/bell cutters, etc.), approx. 50 various used and new cutters included. • Hydraulic working stroke of tool spindle towards the workpiece, with integrated hydraulic unit. • Workpiece counter Condition: Good – demonstration-ready, very interesting due to extensive accessories. Delivery: ex stock – as inspected * Payment: strictly net – upon receipt of invoice We look forward to your order. Approximately 100 different gear cutting machines are still available in stock for selection. Please inquire with us.

Stanje: generalkompletno obnovljen (rabljeno), Exit unit 2 rollers with width 180 mm 2 driven rollers below 2 non-driven rollers above Djdpfx Apsnvf Tbslekl >>overhauled

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, moč: 255 kW (346,70 KM), ø 5-50 mm; 30 m/min 1.5 kW Core diameter 400-1100 mm, coil width 100-400 mm. Many extras Djdjuu H Emjpfx Aplekl