Mobilni tračni brusilnik kovin

KMU MFBS 75

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm Isdpfxeirax Ue Adkstd -Weight: 1500 kg

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Ijdpfxopugwij Adkotd Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Stanje: kot nova (razstavni stroj), A demonstration belt grinder WIEGAND with two belt speeds, ideal for steel and stainless steel Belt dimensions: 2000 x 150 mm Ijdpfx Adspgmufokjtd Belt speed: 18 / 37 m/sec Power: 2.2 / 3.8 kW, 400V/50Hz Weight: 110 kg Technical data and dimensions: Subject to change/errors excepted

Leto izdelave: 1960, stanje: dober (rabljeno), številka stroja/vozila: 970015, Load capacity with faceplate in horizontal position: 10 t Load capacity with faceplate in vertical position and center of gravity at 300 mm: 10 t Load capacity with faceplate in vertical position and center of gravity at 830 mm: 5.5 t Faceplate dimensions: 1500 x 1500 mm Faceplate speed, hydraulically infinitely variable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Swivel time for full swivel range upwards: 140 s Swivel time for full swivel range downwards: 120 s Ijdpfx Aocblc Sodkstd Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Counterweight weight: 2.3 t

Leto izdelave: 2004, stanje: dober (rabljeno), številka stroja/vozila: 0441057, Offer 23300 Technical Specifications: - Abrasive belt dimensions: 75 x 2000 mm - Surface grinding opening: 75 x 300 mm - Support vise – angle adjustable: 90° - 30° - Belt speed: 15 + 30 m/sec - Possible contact wheel diameters: Ø 20 - 76 mm - Contact wheel length: 75 mm - Drive: 400 V / 2.2 / 3 kW - Drive speeds: 1440 / 2880 rpm - 1 piece contact wheel: 48 mm Iedepug D Espfx Adkjtd - Space requirement approx.: W 800 x H approx. 1000 x D 1300 mm - Weight approx.: 250 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, 300 kg load capacity welding positioner, with 125 mm hollow shaft diameter with 320 mm or 400 mm chuck very robust totally variable speed control from 0.15 to 5.0 rpm current transmission 350 A table diameter 400 mm tilt angle up to 135° Itodolamtbepfx Adksd height horizontal 835 mm, tilted to center approx. 735 mm length 850 mm x width 580 mm

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. Ijdetmqi Dspfx Adkjtd The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, trajanje garancije: 3 meseci, vrsta hlajenja: voda, varilni tok pri 60% delovnega cikla: 500 A, varilni tok pri 100% delovnem ciklu: 400 A, For sale: Miller PipeWorx 400 565 AMP (500A @ 60%, 400A @ 100%) 380 Volt Year: 2013 Water-cooled Pulse function RMD process Program memory Electrode option Suitable for welding steel and stainless steel Iedpfx Asx Rppcsdkotd Completely overhauled, tested, and serviced. Test welding possible Includes: 1.0-1.2mm feed rollers, 2x PRO5000 welding torches, ground cables, gas hose, transport trolley, and 3 months warranty. Test welding is possible. A video of the machine in welding operation can be provided upon request. We also deliver to countries such as Spain, Germany, Austria, Lithuania, Greece, and all other countries within and outside Europe using Euro pallets per shipment. All our machines have been serviced and are 100% ready for operation, unless otherwise stated. The pictures above show the actual machine. We can also offer other machine types, such as: Used, New, Mig, Mag, CO2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, We offer the following brands: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business directly with Cjays Lastechniek and never with third parties.

Leto izdelave: 1990, stanje: rabljeno, številka stroja/vozila: xxxx; Lg-Nr. 17250, Technical Data: - Load capacity approx. 200 kg - Outreach 800 mm - Working height at horizontal position approx. 1000 mm Iedpfx Aedd Ilxjdkjtd - Boom arm motorized swiveling left and right - Boom arm manually tiltable - Faceplate motorized swiveling left and right - Faceplate speed steplessly adjustable - Faceplate diameter 300 mm - Swiveling control panel with ESAB control system, type 6 PTF, year 1997 - Space requirement approx. W 1100 x H 1300 x D 1600 mm - Weight approx. 300 kg

Leto izdelave: 2015, stanje: rabljeno, Container turning device, welding table, welding positioner, roller stand Load capacity: 1000 kg Iedec Ny H Aepfx Adketd With foot remote control Infinitely variable speed control: 80 to 1600 mm/min Diameter: 20 mm to 700 mm