Črpalka za sistem vodnega curka 100 KM

KMT SLV 100 HP S

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.160 mm, pomik osi Y: 762 mm, pomik po osi Z: 650 mm, hitro pomikanje X-os: 24 m/min, hitri pomik os Y: 24 m/min, hitri pomik na osi Z: 24 m/min, proizvajalec krmilnikov: FANUC, model krmilnika: FANUC 0i-MD, skupna višina: 3.170 mm, skupna dolžina: 5.500 mm, skupna širina: 2.892 mm, širina mize: 760 mm, dolžina mize: 2.160 mm, obremenitev mize: 1.800 kg, skupna masa: 15.000 kg, hitrost vretena (min.): 60 obr/min, največja hitrost vretena: 12.000 obr/min, dovod hladilne tekočine: 20 letvica, razdalja od središča mize do nosu vretena: 800 mm, moč vretenovega motorja: 18 W, nos vretena: ISO 40, število vreten: 1, število mest v zalogovniku orodij: 40, dolžina orodja: 300 mm, premer orodja: 80 mm, teža orodja: 8 g, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Used vertical machining center “DOOSAN model DNM 750L-” with FANUC 0i-MD CNC Hnjdpfxjw D Ayns Af Teg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Control: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant through spindle Coolant shower Hnodpfx Aevgxfyjf Tsg Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel The machine is supplied with many tools.

Leto izdelave: 1996, Stanje: rabljeno, Schütte SF 26S DNT Year of manufacture: 1996 Control: Siemens 840C Number of spindles: 6 Max. bar diameter [mm]: 26 Bar loader magazine: Cucchi BLT Multi-6 (year 2015) Hodpfoi Hb Szjx Af Tong Positions I + III + IV + VI: Longitudinal and cross slides Positions II + V: CNC slides Feed in position VI Pick-off device in position VI Coolant system Ruez hinge belt conveyor integrated in machine bed Knoll hinge belt conveyor 280 S-1/40 ID 26565 (external) Electrostatic separator ISI RON/A 2500A, ID 26295

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 1.150 mm, skupna masa: 12.000 kg, premer vrtanja: 32 mm, Heidenhain iTNC530 CNC control 12-position tool changer Technical data: Travels: X-axis longitudinal (table): 1800 mm Z-axis cross (column): 1700 mm W-axis cross (drilling unit): 1150 mm Y-axis vertical (drilling unit): 1200 mm B-axis (rotary table): 360° A-axis (drilling unit): -25° to +15° Deep drilling area (ELB): Diameter range: 6–32 mm Max. drilling depth: 1150 mm Drive power: 40 kW Machine weight approx.: 12,000 kg Hnodpfx Afjwcldae Tjg Technical data, accessories, and machine description are non-binding. For further technical details, please refer to the photos.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, višina središča: 525 mm, teža obdelovanca (maks.): 5.000 kg, dolžina brušenja: 4.000 mm, premer brusilnega koluta: 1.060 mm, Stroj je bil prenovljen (retrofit) v letu 2024. Krmiljenje Siemens Sinumerik 840D. Hjdpfx Afow Ngm Us Tjng

Leto izdelave: 1998, Stanje: skoraj kot novo (rabljeno), Type of Laser: Q-switched pulsed solid-state laser Laser Medium: Nd:YAG Wavelength: 1064 nm Beam Diameter: approx. 1.2 - 1.3 mm after output coupling mirror at TEM00 Beam Divergence: 5 mrad multimode, 2 mrad TEM00 Pulse Duration (Time): CW / 90 ns Max. Output Power: 65 W (130 W optional) multimode, 16 W single mode Pulse Energy: 16 mJ (30 mJ optional) at 3 kHz Operating Modes: CW, Q-switched from 0.1 to 100 kHz Beam Deflection System: Galvanometer system Line Width in mixed mode: approx. 0.12 mm Hnodpfx Afjd Dhw Ns Tsg

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), A 3-axis precision milling machine, DMG Mori, is available. Travel path X/Y/Z: 200mm/200mm/190mm, spindle speed: 40,000 rpm, feed rate: 30 m/min, accuracy: 0.001mm. Machine dimensions (X/Y/Z): approx. 1800mm/1550mm/1850mm, weight: approx. 2,200kg, control unit: Siemens 840D, operating hours: 4,979h, spindle hours: 1,041h. The spindle was completely overhauled in 2023. An on-site inspection is possible. Hnodpfxovi N D Ss Af Teg

Stanje: novo, Optimum OPTImill MZ 2S Tool Milling Machine Featuring a digital 3-axis position display DP 700 from NEWALL. The feed axes are controlled by an inverter drive via the control panel. Versatile range of applications Excellent damping properties and rigidity of the machine bed All guides are hardened and precision ground, adjustable via gib strips Automatic feed on X, Y and Z axes, continuously adjustable via an electronic joystick on the control panel Electric feed limit stop Ball screws on all axes Central, clearly arranged control panel with integrated digital position and speed display Heavy-duty, large-scale cross table with high-precision machined surface and 5 T-slots Coolant system Oversized handwheels with scale Machine lamp Smooth running Manual central lubrication TECHNICAL DATA Dimensions and Weights Length (product) approx. 1239mm Width/Depth (product) approx. 1168mm Height (product) approx. 1900mm Net weight approx. 1400kg Drill-Milling Head Milling head swiveling range ±90° Drilling-Milling Performance Max. cutter head size 100mm Drilling capacity in steel (S235JR) 30mm Continuous drilling capacity in steel (S235JR) 26mm Max. end mill size 25mm Electrical Data Drive motor power 2.2kW Connection voltage 400V Mains frequency 50Hz Horizontal Milling Table Horizontal table length 750mm Horizontal table width 320mm Distance vertical spindle to horizontal table min. 75mm Distance vertical spindle to horizontal table max. 410mm Horizontal table T-slot size 14mm Horizontal table T-slot number 5 Horizontal table T-slot spacing 63mm Distance horizontal spindle to horizontal table min. 70mm Distance horizontal spindle to horizontal table max. 400mm Maximum horizontal table load 285kg Vertical Milling Table Vertical table length 830mm Vertical table width 250mm Vertical table T-slot size 14mm Vertical table T-slot number 2 Vertical table T-slot spacing 63mm Coolant System Coolant pump drive power 95W Travel Paths Manual X-axis travel 400mm Manual Y-axis travel 200mm Manual Z-axis travel 335mm Automatic X-axis travel approx. 310mm Automatic Y-axis travel approx. 160mm Automatic Z-axis travel 295mm Vertical Spindle Hedpsfnh Sgsfx Af Tong Vertical spindle overhang 100mm Vertical spindle taper ISO 40 DIN 2080 Vertical spindle speed range 50 – 1890 rpm Vertical spindle number of speed ranges 12 steps Vertical spindle drawbar M16 Vertical spindle quill travel 120mm Vertical spindle max. load 1100Nm Feed Rate Feed rate X-axis 10 – 600mm/min Feed rate Y-axis 10 – 600mm/min Feed rate Z-axis 10 – 600mm/min Electrical Connection Total connected load 4kW Motors Rapid traverse X-axis drive motor power 0.375kW Rapid traverse Y-axis drive motor power 0.375kW Rapid traverse Z-axis drive motor power 0.375kW SCOPE OF DELIVERY: Adapter ISO 40/MK3 MT1 and MT2 sleeves Horizontal milling spindle Ø 27 mm Operating tools

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 850 mm, pomik po osi Z: 800 mm, hitro pomikanje X-os: 40 m/min, hitri pomik os Y: 40 m/min, hitri pomik na osi Z: 40 m/min, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 530i, širina mize: 870 mm, dolžina mize: 3.500 mm, obremenitev mize: 3.500 kg, premer vrtljive mize: 800 mm, skupna masa: 24.000 kg, hitrost vretena (min.): 60 obr/min, največja hitrost vretena: 12.000 obr/min, dovod hladilne tekočine: 20 letvica, moč vretenovega motorja: 22 W, nos vretena: ISO 40, število mest v zalogovniku orodij: 60, dolžina orodja: 300 mm, premer orodja: 76 mm, teža orodja: 8 g, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, Univerzalni rabljeni obdelovalni center s pomičnim stebrom, 5 osi, s CNC Heidenhain TNC-530, zasučna glava, integrirana vrtljiva miza. Hnjdpjxixn Njfx Af Tjg

Stanje: rabljeno, Leto izdelave: 2003, Travel X: 930 mm Travel Y: 400 mm Travel Z: 406 mm Spindle speed: 9–6,750 rpm Table size: 1,370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19–890 (X) mm/min Spindle taper: SK 40 Column overhang: 200–680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Product Information: “Multifunction Milling Machine Optimill MF 4 Vario—Tool Milling Machine with Variable Speed” Optimill MF 4 Vario—multifunctional drilling-milling machines designed for professional applications. Electronically stepless drive control with frequency inverter “made in Germany” and digital 3-axis position display DPA 21. Heavy, robust design made of high-quality Meehanite cast iron. High concentricity accuracy with tapered roller bearings, measured at less than 0.01 mm in the quill. Automatic quill feed. Forward/reverse rotation for thread cutting. X- and Y-axes feature adjustable dovetail guideways. Coolant system. Y-axis with flat guideway. Large Y-axis travel of 400 mm. Motorized table height adjustment with rapid traverse on Z-axis. Equipment details: - Frequency inverter quality made in the EU - Drilling-milling head, tiltable ±45°, overhang 200–680 mm, spindle speeds - Stepless speed control with extra-wide speed range - Adjustable drilling depth stop with millimeter scale, easily readable on front - Safety screen, height-adjustable and generously dimensioned - Cross table: massive, large, precisely surface-machined - Motorized table height adjustment on Z-axis - Adjustable limit stops - OPTI control panel: integrated control console - Integrated digital position display DPA 21 with speed display - X-axis : motorized table feed, stepless speed control, rapid feed, forward/reverse Technical Data: Product length: 1,500 mm Product width/depth: 1,450 mm Product height: 2,200 mm Net weight: 1,150 kg Total power connection: 4 kW Electrical voltage: 400 V Phases: 3~ Network frequency: 50 Hz Max. face mill diameter: 100 mm Max. shank cutter diameter: 20 mm Vertical spindle reach: 200–680 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range: 8 steps Vertical spindle speed control: electronically adjustable Horizontal table length: 1,370 mm Horizontal table width: 254 mm Vertical spindle to table min.: 40 mm Vertical spindle to table max.: 446 mm Hsdot U Rm Iopfx Af Teng Horizontal table T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Horizontal table max. load: 275 kg Vertical spindle motor power (normal mode): 3 kW Coolant pump motor power: 100 W Manual X-axis travel: 930 mm Manual Y-axis travel: 400 mm Manual Z-axis travel: 406 mm Automatic X-axis travel: 850 mm Automatic Z-axis travel: 350 mm Drilling capacity steel (S235JR): 32 mm Continuous drilling capacity steel (S235JR): 28 mm Vertical spindle drilling head swivel range Z-X plane: ±45° Vertical spindle quill stroke: 127 mm Vertical spindle quill feed: 0.04/0.08/0.15 mm/rev