3-valjni hidravlični stroji za valjanje pločevine

KK-Industries CY3R-HHS 510-30/45

Stanje: dober (rabljeno), Technical Data: Working length: 2100 mm Maximum bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roll diameter: 200 mm Bottom roll diameter: 180 mm Number of driven rolls: 3 Hydraulic drop-end bearing Cone bending device Extended rolls for section bending Control panel with digital display Motor power: 5.5 kW CE marking Dimensions (L x W x H): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Ijdpfx Afswchn Us Tstb Accessories: Several sets of rolls for pipe and section rolling The seller is not liable for typographical or data transmission errors. The machine is in visual and technical condition, and wear consistent with its age; used machines are sold without any warranty.

Leto izdelave: 1991, Stanje: dober (rabljeno), številka stroja/vozila: 07282, Offer 22336 Itodpemdqllofx Af Teb Technical specifications: - Max. working width: 3030 mm - Max. sheet thickness without prebending: 4 mm - Max. sheet thickness with prebending: 3 mm - 3 driven rollers - Roller diameter (top / bottom): 205 / 185 mm - Working speed: m/min - Drive – brake motor: 400 V / 7.5 kW - Space requirements: approx. W 5500 x D 1400 x H 1300 mm - Weight: approx. 4.7 t - With prebending - Rear roller can be inclined - Swing-out bearing for pivoting the top roller - Extended roller ends for mounting profile rolls - Forward and reverse operation - Separate control panel

Stanje: novo, Dimensions (LxWxH): 1,630 x 700 x 1,200 mm Approx. Weight: 480 kg Total Power Requirement: 1.1 kW Bending Radius: 2 mm Sheet Thickness: 3 mm Sheet Length: 1,050 mm Technical Data Sheet Rolling Machine Roller Diameter: 90 mm Rolling Speed: 6 m/min • Asymmetric roller arrangement • 2 rollers driven by brake motor • Rear roller adjustment via handwheel • Swiveling top roller • Conical rolling device • Double foot switch for forward/reverse operation • Lower and rear rollers with wire grooves Ijdpfod Eqqqsx Af Tstb • Operating manual in GERMAN EXTRA: hardened rollers EUR 900,-- See the catalogue at the following link:

Stanje: pripravljen za uporabo (rabljen), najv. debelina jeklene pločevine: 10 mm, zadnji prislon: 1.000 mm, moč: 21 kW (28,55 KM), skupna dolžina: 4.330 mm, skupna širina: 2.200 mm, skupna višina: 2.110 mm, lastna masa: 10.000 kg, dolžina obdelovanca (maks.): 3.100 mm, CNC Siemens, zadnji naslon in nastavitev rezalnega kota; 2 sprednji podpori dolžine 3 metre; ročna nastavitev reže rezila; zadnja zaščita za vstop. Udari/min: 9 > 40 udarcev/min Nastavljiva rezalna naprava: 0,1 > 1,5 mm Zadnji naslon: 1000 mm Siemens Nastavljiv rezalni kot: 0,5° > 2,5° Potrebni tok: 380V Število držal za pločevino: 17x Ijdpfx Asv Taiaof Tstb

Stanje: novo, Fastech 3-Roll Plate Bending Machine FRS 2050 x 140 Technical specifications: Ijdpfxjhzq D Hj Af Tstb Special features included in the price: • Hardened rolls • Motorized rear roll adjustment • Motorized lower roll adjustment • 2 x digital readout Sheet width: 2050 mm Sheet thickness: max. 4.5 mm Pre-bending thickness: 4.0 mm Roll length: 2050 mm Roll diameter: 140 mm Minimum bending diameter: 210 mm Weight: 1530 kg Dimensions (L x W x H): 3240 x 900 x 1200 mm Motor: 2.2 kW Equipment: • Electrically driven top and bottom rolls • Swing-out top roll • Conical bending device • Asymmetric roll arrangement • Self-braking main motor • Separate control and operating panel • Safety cable • Values refer to St-37 / 240 N/mm² • CE mark

Stanje: novo, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3020 mm Press force: 135 t Approach speed: 140 mm/s Maximum bending speed: 10 mm/s Return speed: 130 mm/s Stroke: 320 mm Installation height: 550 mm Throat depth: 450 mm X-axis travel: 750 mm X-axis speed: 300 mm/sec R-axis travel: 250 mm R-axis speed: 100 mm/sec Clear distance between uprights: 2555 mm Machine length: 3730 mm Machine width: 2300 mm Overall height: 2850 mm Table height: 900 mm Motor power: 15 kW Oil tank: 190 l Machine weight: 9500 kg (Technical data may vary depending on equipment) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Double-guided upper beam, stable and precise - Sturdy, double-guided back gauge - Manually adjustable back gauge fingers, double-guided on linear rails - Moveable front support arms with height adjustment - Side and rear safety covers - Lower die adapter rail 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot pedal with emergency stop Iodpeq Rdtqsfx Af Totb - 380 V, 50-60 Hz, 3 phases - LED lighting Recommended options: - Dener DA 66T control system - Fiessler AKAS 2M laser finger guard - FPSC Safety PLC (manual) - X-R axis with servo motors - CNC crowning for high bending precision - 2 additional back gauge fingers Further bending lengths and capacities available with appropriate accessories!

Stanje: rabljeno, Leto izdelave: 1978, Sheet width: 3100 mm Sheet thickness: 2 mm Backgauge: 1000 mm Cutting angle: 1°06’ Strokes per minute: 45 spm Total power requirement: 3.0 kW Isdouagxpspfx Af Totb Space requirements (approx.): 3600 x 2200 x 1600 mm Weight: 4500 kg Equipment: - Electrically powered backgauge - With digital ELGO position display - Manual blade gap adjustment - 1x side gauge with mm scale - 2x support arms - 1x free-moving double foot pedal - Front finger guard Special accessories included: - Pneumatic sheet support device for cutting thin sheet metal

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2000, skupna masa: 4.500 kg, Hidravlične škarje za vertikalno rezanje Znamka: HACO Model: TS 306 Itjdpfxjxgdlno Af Tsb Proizvajalec/prodajalec: Casanova Trofazna napetost 380V Leto: 2000 Tip: Vertikalni rez (nagib rezila) Dolžina reza: 3050 mm Kapaciteta: 6 mm Nastavitev kota reza: 0,5-3 stopinje Število pritisnih elementov: 13 Udarec na minuto: 8-14 Kvadratno roko: 1000 mm Zadnja letev: 750 mm Motorizirana zadnja letev z ročnim volanom za fino nastavitev Motor: 7,5 kW Teža: 4500 kg

Stanje: dober (rabljeno), Technical Data: Working width: 4050 mm Maximum bending capacity: 6.0 mm Maximum pre-bending: 4.0 mm Upper roll diameter: 210 mm Isdswkaalepfx Af Tetb Diameter of lateral lower rolls: 210 mm Diameter of central lower roll: 210 mm Conical bending device via tilting of both side rolls Hydraulic drop-end bearings Swiveling control panel with digital display Dimensions (L x W x H): approx. 6900 x 2300 x 1800 mm Net weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's condition in terms of appearance, technology, and wear is consistent with its age; used machines are sold without any guarantee.

Stanje: rabljeno, Leto izdelave: 1993, Technical details: Sheet width: 3050 mm Sheet thickness: 6.0 mm Frame gap: 3460 mm Strokes per minute: min./max.: 9 / 17 strokes/min Backgauge: 750 mm (motorized) Cutting angle: 0.5° - 3.0° Blade clearance adjustment: manual Hold-downs: 18 units (hydraulic) Table size: 380 x 3100 mm Total connected load: 7.5 kW Machine weight approx.: 4.56 t Machine dimensions: L: 2.3 x W: 3.7 x H: 1.8 m Equipment: - with side stop L: 1000 x W: 100 x H: 60 mm and stop bar 990 mm, with 8 supports - Operation via control panel and foot switch - Cutting zone illumination Itsdpfx Afeu Rni Hs Teb - Stroke counter - Machine feet as per details.