Stroj za rezkanje na postelji - Universal

KIHEUNG KNC-U800

Stanje: rabljeno, Leto izdelave: 1999, x-pomik 1900 mm y-pomik 800 mm z-pomik 800 mm Isdjrpa N Iopfx Agpea Krmiljenje 426 Heidenhain Teža stroja ca. 12 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Fanuc 21iTB control Isdpfxowzyndj Agpea 16-position BT50 tool changer Worktables: 1600 mm diameter, maximum rotation speed 250 rpm, maximum load capacity 8,000 kg Maximum workpiece diameter: 2,000 mm; maximum machining height: 1,250 mm Cross slide: 250 x 250 mm; Z-axis travel: 900 mm Chip conveyor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Available directly from toolmaking department Vertical Machining Center Make: DMG Model: DMC 104 V Linear Year of manufacture: 2003 CNC: Siemens 810 D Powerline Spindle hours: 18,200 (as of July 2024) Table size: 1250 x 600 mm Travel X-axis: 1000 mm Travel Y-axis: 600 mm Travel Z-axis: 500 mm Tool holder: SK 40 Spindle speeds: 1 - 12,000 rpm Ijdjt I Di Ajpfx Agpja Drive power: 13/19 kW at 100/40% duty cycle Tool changer: 30 stations Equipment: • Linear drive in X-axis • Bed flushing • Spiral chip conveyor • Direct position measuring system • Drill breakage control via laser • Z-axis temperature compensation via sensor incl. active cooling unit • Internal coolant supply through the spindle • External air blast via 2 pipes • Coolant system 700 liters, paper band filtration system with high-pressure unit 40 bar • Visiport viewing window on operator door • Additional machine door on left side • Bader cooling unit on control cabinet • Prepared for connection of a 4th axis with Siemens 1FT 6064.1AF71-4AG1 drive motor and indirect measuring system with seal air 0.5 bar

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max bar diameter: 32 mm - Max machining length: 320 mm - Spindle speed: 8,000 rpm - Spindle drive power: 3.7 / 5.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max bar diameter: 32 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 6,000 (T01-T02-T03) / 4,000 (T04) rpm - Driven tool power: 1 kW - X/Y travel: 142 / 348 mm TOOL HOLDER 2 - Number of positions: 3 TOOL HOLDER WITH B AXIS - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 5,000 rpm - Driven tool power: 1 kW - B axis stroke: 0 - 135° SUB MACHINING - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW FRONT UNIT - Number of positions: 2 - Number of driven positions: 2 - Driven tool speed: 8,000 rpm - Driven tool power: 1 kW ELECTRICAL SUPPLY - Total power requirement: 21 kVA DIMENSIONS AND WEIGHT - Footprint: 2,150 x 1,280 mm - Machine height: 2,010 mm - Machine weight: 3,600 kg MACHINE HOURS - Power-on hours: 37,855 h - Operation hours: 9,578 h ACCESSORIES - Control: Fanuc 31i-B5 - Interface: RS232 / PCMCIA / RJ45 / USB - Driven guide bushing - Parts catcher Iodpfx Agswdalnopea - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: MULLER COMBILOOP CL2 * with high-pressure pump: 100 bar - Bar feeder: IEMCA BOSS 338 HD / 32 LL - Electrical transformer

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.400 mm, premer vretena: 100 mm, hitrost vretena (min.): 10 obr/min, največja hitrost vretena: 2.500 obr/min, The machine is in good technical condition, currently disconnected. Equipped with a Heidenhain TNC 530i control system, chip conveyor, and a 40-position tool magazine. Iedpfxsv Upbnj Agpea

Stanje: rabljeno, Leto izdelave: 1998, Tlak 175 t Upogibna dolžina 4050 mm Širina med stojali 3050 mm Izsod 300 mm Hod 240 mm Hitrost pomika navzdol prazno maks. 140 mm/s Delovna hitrost maks. 9 mm/s Hitrost povratka maks. 130 mm/s Iodpfx Agstv Rh Ajpea Razdalja miza / bat min. 370 - maks. 610 mm Krmiljenje CYBELEC DNC 880S Skupna priključna moč 15 kW Teža stroja pribl. 15 t Prostorske zahteve pribl. 5,89 x 3,6 x 3,16 m Oprema: - krmiljene osi: Y1, Y2, X, R - CNC bombiranje - Krmiljenje CYBELEC DNC 880S - zasukljivo upravljanje, spredaj desno - 4x ročno nastavljivi ustavitveni prsti - Nožni pedal - 1 komplet zgornje orodje - 1 komplet spodnje orodje - 2x držala za material spredaj - Bočna + zadnja varnostna zaščita - Navodila za uporabo

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), An angular processing line for window and door production by Weinig is available. Maximum tool outer diameter: 320 mm, maximum tool cutting circle: 232 mm, tenoning spindle length: 640 mm, profiling and feed pass length: 285 mm–320 mm, control system: Siemens WS400. Includes complete tool set and sash window tooling. Documentation available. Iodstq U A Ispfx Agpsa

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 600 mm, pomik po osi Z: 700 mm, - Milling head/spindle overhauled in 2022 for €28,000 - Heidenhain iTNC530 CNC control - NC swiveling milling head: Isdsrz I Hbjpfx Agpsa B-axis as full NC axis A-axis horizontal/vertical - NC rotary table (C-axis) - 72-position tool changer - Chip conveyor - Electronic handwheel - Coolant system (internal coolant supply 20 bar) Technical details: X-axis travel (longitudinal): 1200 mm Y-axis travel (cross): 600 mm Z-axis travel (vertical): 700 mm C-axis rotary table: 360° B-axis: ±90° Rotary table size: 800 mm Spindle taper: SK40 Spindle speed range: 0–6300 rpm Number of tool places in ATC: 72 Spindle drive power 100/40% duty cycle: 17/25 kW Machine weight approx.: 9000 kg Technical data, accessories, and machine description are not binding.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 83 mm, stružna dolžina: 1.000 mm, premer struženja: 570 mm, premer struženja nad zgornjim sanežem: 340 mm, premer tulec: 80 mm, hod vretena: 200 mm, skupna masa: 3.200 kg, zunanji premer vpenjalne glave: 250 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machine is in very good condition. Iodpewxw S Isfx Agpea Available immediately! Can be tested under power.

Stanje: rabljeno, Leto izdelave: 1979, X-hod 800 mm Iodpswwwqhofx Agpoa Y-hod 300 mm Z-hod 400 mm Območje vrtljajev 25 - 2.000 min^-1 Pogonska moč 4 kW Pomik 5 - 500 mm/min Hitri pomik 1,5 m/min Delovna miza: 1.000 x 700 mm Vpenjalni stožec SK40 Teža 1,8 t Prostorske zahteve cca 2,50 x 2,40 x 2,00 m Stroj je v dobrem stanju Digitalni prikaz je pokvarjen (merilni trakovi delujejo) Izmenljiva rezkalna glava Brez dodatne opreme