Stroj za rezkanje na postelji - Universal

DECKEL FP 3 L

Stanje: dober (rabljeno), Leto izdelave: 1975, Deckel FP3L with 3-axis Heidenhain digital readout, fixed table, vertical milling head, SK 40 S20x2 spindle taper. Good, ready-to-use condition. Can be demonstrated under power by prior arrangement. Isdpeuclbzsfx Al Netf

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1983, Turning length: 1500 mm Itjdpsxfwc Rsfx Al Nof Swing diameter: 475 mm Swing diameter over cross slide: 290 mm Swing diameter in gap: 655 mm Spindle speed range: 14.0 - 2000 rpm Longitudinal feeds: 0.05 - 0.736 mm/rev Spindle bore: 61.0 mm Tailstock taper: MK 4 Quill stroke: 200 mm Quill diameter: Ø 70.0 mm Spindle nose: DIN 55022 GR 6 Bed width: 330 mm Voltage: 380 V Total power requirement: 7.5 kW Weight: 2400 kg Dimensions LxWxH: 3080 x 1160 x 1485 mm From a maintenance workshop (university hospital) In good condition (!!) With original documentation and machine card Features: - Robust conventional electrically driven lathe - KLOPFER 4-jaw chuck Ø 200 mm - MULTIFIX tool post with 3 inserts - Adjustable tool post guard - Adjustable bed stop - Machine bed with removable bridge (gap) - Moveable tailstock including live center - Pivoting machine lamp - Machine anti-vibration feet - Chip backsplash (rear sliding) - Emergency stop button at front - Original operating manual and machine card

Stanje: dober (rabljeno), Leto izdelave: 1981, Deckel FP3L Aktiv with 3-axis Heidenhain Aktiv digital readout, fixed table, vertical milling head, SK 40 spindle taper and S20x2 spindle mount. In good, operational condition. Can be demonstrated under power by prior arrangement. Isdpfxjwg S Nkj Al Nstf

Leto izdelave: 1975, stanje: dober (rabljeno), Deckel FP3L with adjustable angle table, vertical milling head, SK 40 spindle taper, S20x2 thread. In good, operational condition. Can be demonstrated under power by appointment. Itodpfx Alsildwxj Nsf

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 2.485 h, številka stroja/vozila: 0300212166, konfiguracija osi: 4x4, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Pogon: kolesa Iodotr Itbopfx Al Notf Lastna teža: 10.850 kg Dvižni steber: vrtljiv pregibni krak Dvižna zmogljivost: 230 kg Delovna višina: 2.050 cm Maks. horizontalni doseg: 1.210 m Transportne dimenzije (D x Š x V): 8,55 x 2,45 x 2,85 Za dodatne informacije kontaktirajte skupino PFEIFER.

Stanje: novo, Leto izdelave: 2026, Overhauled, as-new machine, modernized to meet the legally required safety standard “state of the art” according to operational safety regulations of the professional associations. Control Cabinet Electronics Installation of a new CE-compliant control cabinet in accordance with the latest statutory regulations of the professional associations: BGVA 3 / DIN EN 60204-1 new machine standard. Optional: complete machine in CE execution. A CE declaration of conformity will be issued for the machine, making FPS Werkzeugmaschinen GmbH the legal manufacturer. This ensures the machine complies with the OPERATING SAFETY REGULATION (BetrSichV). The machine’s year of construction is considered to be the delivery date. Standards applied: EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1. Control 3-axis FPS Aktiv digital display Speed 25 - 2500 rpm, geometrically stepped direct gearbox with 18 speed stages for maximum torque / milling performance Feed 5 to 500 mm/min, infinitely variable Itjdpfoh Sptnox Al Nof Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 100 mm, SK40 with M16 drawbar thread optional: with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z: 800 / 300 / 400 mm Table Rigid angle table, 1000 x 440 mm, load capacity 2000 kg Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP3L with 3-axis K&C digital display, NEW, in very good condition Technical Data: Ijdpfx Aljvn N Hdo Njtf - Year of manufacture: approx. 1975 Machine No. 0924 - Fixed angular table (clamping surface 1000 mm x 440 mm) - Spindle speed: 40 – 2000 rpm - Feed and rapid traverse on 3 axes - Feed: 10 to 500 mm/min - Rapid traverse: 1500 mm/min in all feed directions - Drive power: 2.2 kW - Travel X/Y/Z: 800/300/400 mm (Y-axis travel displacement additionally 200 mm) - Equipment: vertical & horizontal spindle - Extendable vertical quill and horizontal quill SK40 - Drawbar system S20x2 - Weight approx. 1900 kg Accessories and Features: - 3-axis K&C digital readout, newly installed, with manufacturer’s warranty and operating manual. Display unit: reference points, set zero points, input coordinates, mm/inch switch, absolute or incremental coordinates, circle functions, hole pattern, radius milling functions, etc. - Mechanical central lubrication - Operating manual - Hydraulic vice 160 mm - Rotary table Walter 500 mm About the Machine: Offered is a universal milling machine Deckel FP3L in very good condition. The vertical head can be shifted by 200 mm to allow for an even larger working area. A central pump ensures lubrication of the various axes. A unique feature of this machine type is its basic design: it is a machine with a slant bed table. The movement processes are allocated to the work spindle and thus to the tool. This results in high accuracy, as different workpiece weights have no effect on the axis movements. Mechanically and electrically tested. You are welcome to inspect and test the machine under power on site.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone a comprehensive partial overhaul in our workshop. Among other things, both the main spindle bearings and the leadscrew/feedshaft bearings have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to inspect on-site. Availability: on request Machine No.: 3595 Year of manufacture: 2001 Center height: 180 mm Center distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 - 0.888 mm/rev Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.35 - 12 mm Itjdsthd Shspfx Al Njf Spindle brake: switchable Connected load: 4 kW Dimensions (LxHxW): approx. 2.2 x 1.5 x 1 m Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop specializing in mechanical engineering. - All machines are thoroughly inspected. - All lubricants and, if necessary, worn parts are replaced in advance. - Upon request, we can carry out a complete or partial overhaul of the machine of your choice. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools directly. - Upon request, we can also install further accessories such as safety equipment, etc. - We are happy to arrange shipping and/or installation for you.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Universal Tool Milling Machine Make: DECKEL Model: FP 3 L Aktiv Year of manufacture: unknown – overhauled, newly painted, Itedpfxsh Rv U Ee Al Njf RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue Machine no.: 2302-2319 Milling head type: 2271 Milling head no.: 700-0883 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, electric - Coolant device - Operating manual - Drill bit grinding attachment with diamond wheel - used, as seen -

Stanje: rabljeno, številka stroja/vozila: 1621, x-axis travel: 800 mm y-axis travel: 300 mm z-axis travel: 400 mm Table size: 1000 x 440 mm Tool holder spindle taper: SK40 Spindle speeds (belt pulley): 40 - 2000 rpm Number of main spindle speed steps: 18 Maximum spindle speed: (6000 possible by changing the belt) rpm Feed rate range: 10 - 500 mm/min Number of feed speed steps: 18 Total power requirement: 3 kW Machine weight approx.: 2.1 t Space requirement approx.: 1600x1550x1930 mm Universal tool milling machine in travelling column bed design for machining heavy workpieces, featuring a 3-axis rotating and swivelling work table, feeds and rapid traverse on all 3 axes, both vertical and horizontal quills with high-speed head, maximum speeds of 1900/2350/3000/3750/4750/6000 rpm adjustable via belt preselection, coolant pump, universal clamping table equipped with 6 T-slots, each 16 mm x 7. Separate control cabinet without main machine switch. Itjdjh Ra Nqjpfx Al Njf

Leto izdelave: 2001, stanje: rabljeno,