Linije za polnjenje sodov

KHS / GEA KEG FILLING LINES

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, pritisk: 70 letvica, skupna višina: 1.600 mm, skupna širina: 800 mm, skupna dolžina: 1.200 mm, temperatura: 40 °C, obratovalni tlak: 70 letvica, raven hrupa: 80 dB, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 l/day Potable Water Compact, fully automatic reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, small industrial and utility facilities. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: approx. 15,000 l/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salt content) Permeate Quality: Drinking water, approx. 500 mg/l residual minerals (reference value) Recovery Rate: approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: approx. 25 °C (operating range approx. -2 to 35 °C) Process Technology & Construction DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Generally no chemical feed water pretreatment (no acid dosing) required Integrated rinse and CIP function, controlled via PLC Skid-mounted on stainless steel frame (AISI 316) High-pressure piping in stainless steel, low-pressure side in seawater-resistant plastic Pump parts in contact with seawater made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: approx. 1,000 l/h (reference value) Operating Pressure RO Module: High pressure range, designed for seawater desalination Power Connection: 230 V, 50 Hz, 1~ Power Rating: approx. 6 kW Control, Monitoring & Safety Local control panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown, including: - Insufficient inlet pressure - Exceeding the allowable operating pressure - Overpressure in the permeate/concentrate line - Exceeding defined conductivity limits (with automatic diversion to drain) Automatic “Stop & Rinse” function: rinse of seawater-carrying components with permeate upon shutdown to reduce fouling during idle periods Dimensions & Weight (Skid) L × W × H: approx. 1,190 × 705 × 1,500 mm Djdpfxsw Uf Iho Anxsuu Weight: approx. 530 kg (dry), approx. 605 kg (in operation) Typical Applications Ships, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility facilities Backup or peak-load system for existing drinking water production Further technical documentation, photos, as well as information regarding scope of delivery, pricing, and availability are available on request.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Na voljo sta dva enaka cevna pakirna stroja, teža: 1,1 t. Djdpfx Ajnfvxzjnxsuu

Leto izdelave: 1993, stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: Seriennummer: 9302394, CNC control HATASTAR 2000 Pressing capacity: 500 t or 5000 kN Tooling available in addition to the machine Control cabinet on the left X1- + R-/ X2- + R-axis on linear guide Y1- + Y2-axis Hydraulic upper tool clamping Pneumatic sheet follower device + front stops on linear guide Duodpfx Aned Egc Ajxju Second two-hand operation Universal die 100x100x5'100 mm Gooseneck blade 280 x 5'100 mm Die centering plate, b = 111 mm

Stanje: pripravljen za uporabo (rabljen), Peripheral speed: 80 m/s, on-site inspection is possible. Dedpfxsrp E Nns Anxjuu

Stanje: skoraj kot novo (rabljeno), Ilapak rostfrei Flowpack-Verpackungslinie mit Schrumpftunnel – Carrera 2000 PC Dujdpfsd I Ncgsx Anxeu Edelstahl-Flowpack-Maschine mit Doppelbackenbetrieb, Backenbreite 180 mm, Doppel-Folienabroller mit automatischer Folienrollenverbindung, computergesteuertes Bedienfeld, Gesamtlänge 3.800 mm, Zuführlänge 2.000 mm mit 200 mm geteiltem Mitnehmerabstand. Diese Ilapak wurde bisher mit bedruckter Folie betrieben und verfügt über die Möglichkeit einer Lichtschranke (PEC). Der Vorbesitzer hat 30 Mikron PE verwendet, die Maschine kann aber auch viele andere Foliensorten verarbeiten. Bisher zur Verpackung von Pizzen eingesetzt. Im Lieferumfang sind außerdem der Ilapak Indy Schnellzuführer und ein Ling Schrumpftunnel aus Edelstahl enthalten.

Stanje: rabljeno, Leto izdelave: 2012, Overview This brewery and utilities package was manufactured between 2001 and 2023 by European producers such as Slowbeer, GG-Technik, Lavor, Sommer, Quantor, and others. The package includes a 500-liter brewhouse as well as steam generation, malt mill, cooling system, compressed air, and transfer pumps. An on-site inspection is possible. Technical Data Wort Output: 500 l Configuration: 3 vessels + hot water tank + cold water tank + boiler Steam-heated Cooling capacity: 35.8 kW Scope of Delivery Duodpfx Aneyg R Dlexsu Brewhouse | Slowbeer | MB-500MAN | 2012 | 500 l, incl. tanks & vessels Steam Generator | GG-Technik | TD9 | 2016 | 5 kW Steam Generator | Lavor | GV Vesuvio | 2014 | 18 kW, serviced 2025 Malt Mill | Sommer | Piccolo 11 S | 2012 | Grain mill Chiller | Quantor | Q352RHQ | 2021 | 35.8 kW Air Receiver | Fiaseis | Coinox | 2023 | 270 l, stainless steel Compressor | CompAir | WinVOM L15 7.5 | 2001 | — Transfer Pump (2x) | Ebara | CDXM-B120-20 | — | Stainless steel Air Dryer | — | E2000 | 2001 | Compressed air dryer

Stanje: rabljeno, Proizvajalec: Dreher Stanje: Rabljeno Številka zaloge: 3175 Dodatne funkcionalnosti Linija je sestavljena iz: Dreher varilni sistem z 2 sodoma Tip: KBA500 Letnik: 2006 Kotliček: 550 litrov Ogrevanje: 42 kW Upravljanje: KBA basic 3x Dreher fermentacijski tanki Tip: GW500 Letnik: 2006 Dsdpfx Anjyzyy Hsxsuu Prostornina: 520 litrov Z Dreher ZKV120 hlajenjem 3x Dreher / Brovarni dozatvni tanki Tip: 500 L CCT Letnik: 2017 Prostornina: 500 litrov 1x Dreher brite tank Prostornina: 1000 litrov 6x Dreher Kombi tank Tip: KT500 Letnik: 2006 Prostornina: 500 litrov 5x FIB pivski tanki Tip: 70200503 Letnik: 2022 Prostornina: 540 litrov Pomožna oprema med drugim: - Gail 103 mlin za žito - Enotecnica Pillan srl F30 20x20 filter - Serrco SW-150 rezervoar za hladno vodo - Postaja za pranje steklenic - Polnilni stroj za steklenice - Aparat za zamaške - 45x 20-litrski sodi - Delovna miza - Dvojno pomivalno korito

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, teža tuljave: 8 kg, najv. debelina pločevine: 3 mm, najv. debelina jeklene pločevine: 3 mm, skupna širina: 1.250 mm, Prodam rezalno linijo za vzdolžno rezanje Djdjv Twi Ropfx Anxouu

Stanje: rabljeno, številka stroja/vozila: LC600, Technical Specifications and Performance Data This used bottling line is configured for highly efficient beverage production in 0.5L PET bottles. Optimised for both carbonated and still water, the line delivers reliable throughput with robust end-of-line packaging and palletising. The configuration is non-combi and features a separate blow moulder upstream of the filling monoblock, ideal for flexible maintenance and line balancing. Production speed: 25,000 bph Bottle formats: Compatible with 0.5L bottles Containers: Designed for handling PET bottles Configuration: Non-combi (separate blow moulding and filling systems) Main components and years of manufacture: - Sidel Universal SBO 14 blow moulder (2007) - Sarcmi 70-10 ISO filling monoblock (1988 – fully overhauled 2025) - Sarcmi labeller (2011) - Zambelli shrink wrapper (2004) - Handle applicator (2004) - ACMI double-head palletiser (1992) Dodpfxsyk E Srs Anxeuu Advanced Automation and Control Systems The line benefits from a modernised conveyor and control system, with conveyor management and electrical control cabinets upgraded in 2010–2011. This update improves module synchronisation, enhances safety interlocks, and ensures stable high-speed performance across blowing, filling monoblock, labelling, and packaging stages. - Upgraded conveyor control and electrical panels in 2010–2011 - Integrated safety interlocks for secure, high-throughput operation - Non-combi architecture simplifies maintenance and phased upgrades Line Integration Capabilities Designed as a complete production solution for water bottling, this used line offers seamless integration from blow moulding to end-of-line palletising. The non-combi layout allows independent operation and optimisation of the blow moulder and filling monoblock, making format changes and maintenance manageable without stopping the entire line. Inline flow: Blow moulder → Filling monoblock → Labelling → Shrink wrapping → Handle application → Palletising Conveyor system upgraded for reliable accumulation and product transfer Suitable for carbonated and still water in PET Machine Condition and Maintenance History This used bottling line has benefited from targeted upgrades of the conveyor management and electrical control cabinets, completed in 2010–2011. A key highlight is the Sarcmi 70-10 ISO filling monoblock, originally built in 1988 but fully overhauled in 2025 to ensure maximum operational reliability. The line is sold in operational condition as a ready-to-use industrial packaging solution. - Sarcmi 70-10 ISO filling monoblock: Overhauled in 2025 - Conveyor and electrical control cabinets upgraded: 2010–2011 - Well-known OEM components throughout the line - Operational with existing 0.5L PET format

Stanje: rabljeno, Leto izdelave: 2007, Overview The pallet wrapper was manufactured in 2007 by the Italian producer Robopac. The machine was used in a water and CSD (carbonated soft drinks) production facility as part of a PET bottling line with a capacity of 27,000 bph. The pallet wrapper was professionally dismantled and needs to be serviced technically. Technical data Performance: approx. 60 pallets at 23 wraps Operating hours: 45,363 Pallet top sheet dispenser + top press unit Scope of delivery - Pallet wrapper - Conveyors, rollers Dodpfx Anorwr T Noxouu - Sensors on conveyors (infeed, outfeed, diagonal) - Spare parts (new and used) - Documentation