Kent KGS 615 WMA1

Kent KGS 615 WMA1

Stanje: rabljeno, Manufacturer: CINCINNATI Djdpfx Apswrpykslscg

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor Dcedpfx Ajrqwbispljg • Cutter arbor ø32 mm

Stanje: dober (rabljeno), Leto izdelave: 2007, Deli, ki so prikazane na fotografijah z roko, niso vključene. Dcodorpn Dvjpfx Aplsg Tehnični podatki so prikazani na sliki.

Stanje: rabljeno, Stroj za valjanje navojev ORT RP30U 2-valjna 30 ton Zasukljive glave Inverter #1331 Stroj si lahko ogledate v delovanju v našem skladišču v Gussago BS. Možnost demonstracije M i m u Stroji za valjanje navojev so mehanski postopki brez odrezavanja, ki se lahko izvajajo hladno ali vroče, z namenom izboljšanja površinske kakovosti (torej tudi izboljšanja utrujenostnih lastnosti). Dcsdpfst H Ty Usx Apleg Moč (tona): 30 Število valjev: 2

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1985, Na voljo je stroj za brušenje navojev in polžev Reishauer AG. Dolžina brušenja: 450mm, vpenjalna dolžina: 700mm, maks. premer brušenja: 200mm, maks. korak: 80mm, maks. teža obdelovanca: 100kg, maks. kot koraka: +/-25°, premer brusilnega kamna: 275mm/350mm, hitrost vrtenja: 1850o/min. Dimenzije stroja X/Y/Z: pribl. 2600mm/1800mm/1600mm, teža: pribl. 3400kg. Vključen je oljni centrifugator, pokrov, sistem za odsesavanje oljne meglice in razna dodatna oprema. Zaščitna zavesa proti brizganju je nekoliko otrdela. Dokumentacija je na voljo. Ogled na lokaciji je možen. Dsdpfxsx Dm Dns Aplocg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 750 kg, potovalna razdalja osi X: 350 mm, pomik osi Y: 220 mm, pomik po osi Z: 220 mm, lastna masa: 2.450 kg, Charmilles Robofil 240 Year of manufacture: 2001 Travel ranges (X / Y / Z): 350 x 220 x 220 mm Travel ranges (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 220 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed up to 300 mm²/min Best surface finish: Ra 0.22 µm Dcsdjwqdrropfx Aplog Available wire diameters: 0.10 mm to 0.33 mm Overall system dimensions: 2020 x 2050 x 2000 mm Total system weight: 2450 kg The machine will be cleaned, overhauled, and tested by us prior to delivery. We are happy to offer you the commissioning of the machine.

Stanje: dober (rabljeno), Leto izdelave: 2013, Premer brušenja 140-355 mm Dolžina brušenja 3000 mm Višina konic 260 mm Teža stroja ca. 8,3 t Prostorska zahteva ca. 8500 x 3500 mm Leta 2013 popolnoma obnovljen in vgrajen nov SPS Siemens S7 krmilnik. Brezstopenjske vrtilne hitrosti, enota za uravnoteženje, Zunanja cilindrična brusilka SA 6Ux3000 Leto izdelave 1981 Retrofit 1 x 2013 SERWEMA Maks. premer brušenja / s konjičkom 140 mm Maks. premer brušenja / brez konjička 355 mm Maks. dolžina brušenja 3.000 mm Višina konic 260 mm Maks. teža obdelovanca 500 kg Dodpfxsynmpyj Aplecg Prostorska potreba stroja 8500 x 3500 mm Teža stroja 8500 kg

Leto izdelave: 1992, stanje: rabljeno, Grinding height 50 mm Grinding width 120 mm Grinding wheel diameter 600 mm Total power requirement 85 kW Machine weight approx. 9500 kg D I S K U S CNC-controlled, vertical double-sided surface grinding machine with rotating workpiece infeed and IONIC measurement control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992, No. 7924 --- Grinding wheel dimensions (each): 600 x 150 x 75 mm (H) Workpiece data: Grinding height approx. 1.5 – 50 mm Grinding width approx. 20 – 120 mm Vertical quill adjustment, each approx. 150 mm Djdpfxet Hw Naj Aplocg Infeed increment of grinding wheels via CNC: 0.0001 mm Workpiece transport device, continuously adjustable feed: 40 – 235 mm/sec Grinding wheel speed (each, 30 m/s): 191–955 rpm Grinding spindle drive, infinitely variable (each): 37 kW Total drive power approx. 85 kW / 380 V / 50 Hz Weight approx. 9,500 kg Accessories / Special Features • SIEMENS CNC control SINUMERIK 810 G with display for 4 axes (top and bottom infeed, dresser, and workpiece rotation), direct input of all grinding parameters, and • IONIC measurement control no. 17 A with 2 measuring probes for scanning the workpieces after the grinding cycle, triggers automatic infeed corrections for the grinding wheels; real-time measurement data on monitor for statistics, workpiece counting, etc. • Digital display of current (amperage) of the drive motors and grinding wheel speed • Gantry construction for increased stability and improved grinding accuracy • Rotary workpiece transport with continuously variable speed control as 4th axis • Position control system for monitoring the height position of the lower grinding wheel • 2 adjustable workpiece hold-downs each at the infeed and outfeed, with height monitoring, simple raw part stacking mechanism, finished parts removal via conveyor belt • Half-inclined, side-mounted grinding wheel dressing device with preprogrammable dressing cycles, integrated as CNC axis in the control system with safety shut-off • Large separate electrical cabinet, automatic central lubrication, high-performance pneumatic system • Large PROMATEC (F) coolant system with filtration unit and magnetic separator • Various grinding wheels, flanges, various table segments, transport discs, large dust extraction system, etc. This machine is particularly suitable for simultaneous, parallel surface grinding of workpieces in large series, such as punched parts, piston rings, hydraulic components, etc. Condition: good to very good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice This offers a very rare opportunity in terms of both condition and price. If you require another grinding machine, especially from the manufacturer DISKUS, please send us your inquiry.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 600 mm, širina brušenja: 400 mm, višina brušenja: 400 mm, premer brusilnega koluta: 300 mm, obremenitev mize: 400 kg, širina brusilnega kolesa: 50 mm, skupna masa: 3.600 kg, ELB Perfekt 6, letnik 2002, brusilno območje 600 x 400 mm, brusilni kolut 300 x 50 mm, moč vretena 4 kW, avtomatski brusilni cikel, grobo brušenje, fino brušenje, iskrenje, dvigovanje, ravnalec nameščen na vretenasto glavo z izravnavo, stroj je strokovno obnovljen pri nas in zdaj izpolnjuje geometrijo novega stroja, brusilno vreteno je na novo ležajeno. Pribor: elektro-permanentna magnetna vpenjalna plošča 600 x 400 mm, rezervoar za vodo s papirnatim filtrom, vse funkcije so preizkušene in stroj je možno pri nas prikazati pod napetostjo. Z veseljem prevzamemo tudi postavitev in izobraževanje na lokaciji, kot tudi prihodnji servis. Financiranje / lizing, ni težav, z veseljem pripravimo ponudbo! Dcedpfxsxdalfs Apljg

Stanje: rabljeno, Leto izdelave: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (between centres including clamping): 130 kg Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Dsdpeynmpgjfx Aplecg Required floor space approx.: 4.2 x 2.0 m Initially delivered new to a university. Taken over in 2018. Then fully serviced at BEMA and delivered to a one-man operation. The machine is currently being serviced again and the table geometry restored. 2-axis Fagor digital readout retrofitted. - Tailstock with fine adjustment - Internal grinding attachment - Coolant system Accessories available on request.