Prirobnica

Kellenberger 600 U

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, višina središča: 125 mm, širina na sredini: 600 mm, premer brusilnega koluta: 400 mm, širina brusilnega kolesa: 50 mm, odprtina brusnega koluta: 127 mm, Le moteur et le variateur de fréquence pour la poupée porte-pièce ont été remplacés ! De plus, l'armoire électrique et le schéma de câblage ont été renouvelés ! DÉTAILS TECHNIQUES Hauteur de pointe : 125 mm (175 mm avec réhausses) Distance entre pointes : 600 mm Diamètre de la meule : 400 mm Largeur de la meule : 50 mm Alésage de la meule : 127 mm Orientation angulaire : 270° Poupée porte-pièce : 20 à 400 tr/min Nez de broche : CM 5 Contre-pointe : CM 3 Orientation angulaire de la table : 10° Vitesse de la table : jusqu'à 6,0 m/min DÉTAILS DE LA MACHINE Moteur de meule extérieure : 4,0 kW Moteur de broche porte-pièce : 2,2 kW Dimensions & Poids Bodpfx Asyb R Nqefnold Dimensions (L x l x H) : 2 580 x 1 680 x 1 670 mm Poids de la machine env. : 2 700 kg ÉQUIPEMENT Armoire électrique neuve et schéma électrique renouvelé Moteur et variateur de fréquence remplacés pour la poupée porte-pièce Visualisation numérique 2 axes Bac de refroidissement Géométrie selon protocole Kellenberger Nombreux accessoires

Stanje: dober (rabljeno), Leto izdelave: 1997, Ref.-Nr.: 10619 Hersteller: KELLENBERGER Typ: 600 U Nr. 35 Baujahr: 1997 Steuerungsart: Konventionell Steuerung: n/a Lagerort: Halberstadt Ursprungsland: Schweiz Bsdpfxoya Dayj Afneld Abstand zwischen Zentrum: 600 mm Höhe der Zentren (standard): 125 mm Höhe der Zentren durch Anheben von Arbeitsblöcken Kopf- und Reitstock: 175 - 250 mm Schwenkdurchmesser mit Hubblöcken max.: 350 - 500 mm Tischschwenkung / jede Seite: 10 ° Verweilzeit der Tischumkehr: 0- 5 Sek Durchmesser / Breite / Loch: 250 x 13 x 76 mm Geschwindigkeiten der Schleifscheibenspindel: 1500 / 1700 / 2200 / 3600 Schleifscheibenkopf schwenkbar: 360° Querbewegung des Schleifscheibenkopfes: 285 mm Schnelles Vor- und Zurückziehen des Radkopfes: 40 mm Intermittierende Einspeisung pro Umkehrung der Tabelle: 0,001 - 0,03 mm/dia Arbeitsgeschwindigkeiten stufenlos einstellbar (normal / speziell): 20-400 / 10-400 Max. Schleiflänge: 900 mm

Stanje: dober (rabljeno), Leto izdelave: 2003, Ref.-Nr.: 10618 Hersteller: KELLENBERGER Typ: 600 U Nr. 33 Baujahr: 2003 Steuerungsart: Konventionell Steuerung: n/a Lagerort: Halberstadt Ursprungsland: Schweiz Abstand zwischen Zentrum: 600 mm Höhe der Zentren (standard): 125 mm Höhe der Zentren durch Anheben von Arbeitsblöcken Kopf- und Reitstock: 175 - 250 mm Schwenkdurchmesser mit Hubblöcken max.: 350 - 500 mm Tischschwenkung / jede Seite: 10 ° Verweilzeit der Tischumkehr: 0 - 5 Sek Durchmesser / Breite / Loch: 250 x 13 x 76 mm Geschwindigkeiten der Schleifscheibenspindel: 1500 / 1700 / 2200 / 3600 Schleifscheibenkopf schwenkbar: 360 ° Querbewegung des Schleifscheibenkopfes: 285 mm Schnelles Vor- und Zurückziehen des Radkopfes: 40 mm Intermittierende Einspeisung pro Umkehrung der Tabelle: 0,001 - 0,03 mm/dia Bedjya Dagepfx Afnsld Mikrokorrektor der Einspeisung, 1 Teilung des Zifferblatts: 0,001 mm / Ø Arbeitsgeschwindigkeiten stufenlos einstellbar (normal / speziell): 20-400 / 10-400 Max. Schleiflänge: 900 mm

Stanje: dober (rabljeno), Leto izdelave: 2001, Ref.-Nr.: 10617 Hersteller: KELLENBERGER Typ: 600 U Nr. 36 Baujahr: 2001 Steuerungsart: Konventionell Steuerung: n/a Lagerort: Halberstadt Ursprungsland: Schweiz Abstand zwischen Zentrum: 600 mm Höhe der Zentren (standard): 125 mm Höhe der Zentren durch Anheben von Arbeitsblöcken Kopf- und Reitstock: 175-250 mm Schwenkdurchmesser mit Hubblöcken max.: 350 - 500 mm Tischschwenkung / jede Seite: 10 ° Verweilzeit der Tischumkehr: 0 -5 Sek Durchmesser / Breite / Loch: 250 x 13 x 76 mm Geschwindigkeiten der Schleifscheibenspindel: 360° Querbewegung des Schleifscheibenkopfes: 285 mm Schnelles Vor- und Zurückziehen des Radkopfes: 40 mm Intermittierende Einspeisung pro Umkehrung der Tabelle: 0,001 - 0,03 mm/dia Blodpfsya Daaex Afnod Mikrokorrektor der Einspeisung, 1 Teilung des Zifferblatts: 0,001 mm / Ø Arbeitsgeschwindigkeiten stufenlos einstellbar (normal / speziell): 20 - 400 / 10-400 Max. Schleiflänge: 900 mm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1315/451, Completely overhauled: Mechanical, geometry, hydraulic, and electrical components (checked and/or replaced) Bsdpfsw U Ry Njx Afneld Grinding Wheelhead Disassembly, cleaning of components, replacement of worn or defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. New paint. Workhead Disassembly, cleaning of components, replacement of worn or defective parts, motor overhaul, belt replacement. New spindle bearings. New paint. Tailstock Disassembled, inspected and overhauled Hydraulics Disassembly, motor inspection, replacement of hoses, worn or defective parts. Inspection of hydraulic block. X Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., overhaul of hydraulic piston, table grinding. Z Axis Disassembly, table grinding, replacement of worn or defective parts, overhaul of hydraulic piston, new paint. Electrical Cabinet Complete inspection, replacement of various relays. Paintwork Colours: White RAL 9003 and Grey RAL 7011 Geometry as per manufacturer's protocol. Inspection and cleaning of various accessories Origin CH Voltage 380 / 50 / 3 Net weight approx. 2200 kg Customs tariff position 8460.2920 TECHNICAL SPECIFICATIONS Centres distance (nominal) 600 mm Maximum centres distance (with protruding headstock) 750 mm Centres height, standard 125 mm Centres height with interchangeable shoes for headstocks 175 => 250 mm Max. workpiece diameter (125 mm centres height) 250 mm Max. workpiece diameter with interchangeable shoes 350 => 500 mm Table swiveling each direction 10° Max. surface grinding length (max. width = 200 mm) 900 mm Table speed, infinitely variable hydraulically 0 - 6 m/min approx. Table reversal dwell time 0-5 s External grinding wheel, diameter – width – bore 400 x 50 x 127 mm Surface grinding wheel 250 x 13 x 76 mm Grinding wheel spindle speed 1500/1700/2200/3600 rpm Wheelhead swiveling 270° With indexing every 90° Vertical movement of wheelhead, centre height 125-350 mm Transversal travel of wheelhead 285 mm Hydraulic rapid feed and return stroke 40 mm Incremental feed of wheel by table reversal 0.001 - 0.03 mm/dia Continuous infeed for plunge grinding 0 - 0.9 mm/dia Micrometric infeed stop, per division 0.001 mm/dia Workhead swiveling 360° Workhead spindle speed, infinitely variable (normal/special), rpm 20-400/10-400 Internal taper of workhead/tailstock 5/3 Morse Wheelhead motor, approx. 4 HP All technical data are given without guarantee and subject to errors or omissions.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 32461/2384, Country of Manufacture: Switzerland Voltage: 380 V / 50 Hz / 3-phase Net Weight: 2,200 kg TECHNICAL DATA Bsdpfx Asd Amifofnsld Nominal centre distance: 600 mm Maximum centre distance (workpiece spindle head to tailstock extended): 750 mm Standard centre height: 125 mm Centre height with interchangeable intermediate plates (workpiece spindle + tailstock): 175 – 250 mm Maximum swing diameter (125 mm centre height): 250 mm Maximum swing diameter with intermediate plates: 350 – 500 mm Swivelling range of work table (left/right): 10° each Maximum grinding length (table width = 200 mm): 900 mm Table speed, hydraulically infinitely variable: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for cylindrical grinding (diameter x width x bore): 350/400 x 50 max. x 127 mm Grinding wheel for surface grinding (diameter x width x bore): 250 x 13 x 76 mm Grinding spindle speeds: 1,500 / 1,700 / 2,200 / 3,600 rpm Swivelling range of grinding spindle head: 270°, lockable every 90° Vertical traverse of grinding spindle head (centre height): 125–350 mm Cross traverse of grinding slide: 285 mm Hydraulic rapid infeed and retraction of the grinding slide: 40 mm Feed per table reversal, stepless: 0.001–0.03 mm/rev. Plunge grinding stock removal: 0–0.9 mm/rev. Micrometer stop for infeed per division: 0.001 mm/rev. Swivelling range of workpiece spindle head: 360° Workpiece speeds, steplessly adjustable, standard/special: 20–400 / 10–400 rpm Internal taper, workpiece spindle/tailstock: Morse 5 / Morse 3 Grinding spindle motor approx.: 4 hp Errors and omissions excepted. Technical data provided subject to confirmation. Inventory no. 2170089, Machine accessories list: - 1 Workpiece spindle head, Morse Taper 5 - 1 Sine bar without comparator - 1 Grinding spindle head with 4 drive pulleys - 1 Tailstock, Morse Taper 3 - 1 Collet clamping system with extractor and reduction sleeve B32 - 1 Internal grinding attachment with Fischer UJ50x250 arbor, drive pulley Ø 48 mm for 14,000 rpm - 1 Rotatable wheel dressing unit with 50 mm base - 1 Table swing stop without comparator - 1 Coolant system with decantation - 1 Ejector - 1 Balancing bar

Stanje: rabljeno, TEHNIČNI PODATKI - Razdalja med konicami: 600 [mm] - Višina konic: 175 [mm] - Nagib mize: 11 [°] UNIVERZALNI NOSILEC BRUSNEGA KOLESA – VRETENO - Mere levega brusnega kolesa: 400 x 50 x 127 [mm] - Mere desnega brusnega kolesa: 225 x 20 x 76,2 [mm] - Moč motorja: 3 [kW] - Hitrost vretena: 1500 / 1700 / 2200 - Usmerjenost nosilca brusnega kolesa: 270 [°] NOSILEC OBDELKA – VRETENO Bedpfouhbywsx Afnsld - Usmerjenost nosilca obdelka: 360 [°] - Hitrost vretena obdelka: 20 – 400 [min⁻¹] - Notranji stožec: Morse 5 - Moč motorja: 0,9 [kW] PROTIVRETENO - Notranji stožec: CM4 - Hod pinole: 30 [mm] DIMENZIJE - Potreben prostor: 2580 x 1680 [mm] - Višina: 1670 [mm] - Teža: 2200 [kg] OPREMA - FISCHER notranje vrtalno vreteno: 14.000 [min⁻¹]

Stanje: delavnici obnovljeno (rabljeno), KELLENBERGER 600 U 175 je visoko natančen univerzalni brusilni stroj, točen in zanesljiv. Kapaciteta: višina konic 175 mm, razdalja med konicama 600 mm; brusilni disk Ø350×50 mm, izvrtina 127 mm; brusilna glava 270°. Tehnični podatki: hitrost vrtenja diska 1500–3600 min⁻¹ (4 stopnje); vreteno obdelovanca 20–400 min⁻¹ (brezstopenjsko); naklon mize 10°, do 6 m/min; priključek 3×380 V 50 Hz; motor brusilnega vretena 4 KM; teža ≈2200 kg; mere 3000×1750×1600 mm. Oprema: dvokanalni digitalni prikaz, konjiček z fino nastavitvijo, notranje brusilno napravo, zaščita brusnega diska, zaščitna naprava, drsna vrata. Primeren za tesne tolerance v avtomobilski industriji, urarstvu, orodjarstvu, letalstvu in medicinski tehniki. Bjdpfx Afjxx U H Tjneld

Stanje: rabljeno, Internal diameter: 340/440 mm Grinding depth: 99,999 mm Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Spindle bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece spindle head swivels: 360° Grinding spindle head swivels: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Incremental infeed: 0.001–0.030 mm/Ø Bledpfxod Ih Dxs Afned Continuous infeed: 0–0.95 mm/Ø Table swivel range: ±10° Table longitudinal travel: 900 mm Table feed rate: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (chucked): 130 kg incl. clamping device Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Required space approx.: 3.1 x 2.0 m As the world’s leading specialist in Kellenberger overhauls and retrofits, we are not only able to deliver machines in as-new condition with warranty, but also provide comprehensive service for your equipment. Warranty: 12 months from delivery—for Germany and neighbouring countries. Pure internal cylindrical grinder with infinitely variable drive control (0–100%) Also available in current colour schemes! Standard centre height: 175 mm. Upgradable to 225 mm. Fixed internal grinding spindle, belt tensioned via tensioning pulley. Z-axis reversal precision: max. 0.01 mm Geometrically overhauled and newly painted, including: - New control cabinet - New workpiece spindle motor and 3-phase controller - 2-axis digital readout, x-axis resolution 0.5 μm Options: - Rotary encoder with digital display for the workpiece spindle head - New heavy-duty internal grinding fixture, diameter 80 mm or 100 mm, with height adjustment - Centre height increase to max. 225 mm Included: - Operating tools Further accessories available on request. The machine tool does not currently comply with the essential health and safety requirements as set out in BetrSichV 2015. Assessment for raising the minimum required safety standard must be carried out by means of a risk evaluation according to BetrSichV.

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Blsded Ih D Nepfx Afned Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180 ± ° Grinding spindle speed: 1,500; 1,700; 2,200 rpm Incremental feed: 0.001-0.030 mm/Ø per stroke Continuous feed: 0-0.95 mm/Ø Table swivelling: ±10° Longitudinal table travel: 900 mm Table speed: 0.02-6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – cantilevered: 130 kg incl. clamping Internal spindle bore: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space required approx.: 3.1 x 2.0 m As the world’s leading company in Kellenberger – Overhaul / Retrofit, we are not only able to deliver machines in like-new condition with warranty, but can also offer service for your machines, metrically overhauled and newly painted. Version R: The machine is equipped with central lubrication and roller guides on the X-axis flat bed as well as air lift at the grinding headstock. – Digital display on 2 axes. X-axis resolution: 0.5 µm Optional extras available at a surcharge: – Rotary encoder with digital display on the workpiece headstock – Rotary encoder with digital display on the grinding headstock (no height adjustment with spindle possible) – New heavy-duty internal grinding attachment for 80 mm or 100 mm diameter, with height adjustment – Increase in centre height up to max. 225 mm – Variable speed control for grinding spindle Included: – Operating tools – Clamping tube for chuck Further accessories available on request. The machine tool does not currently comply with the fundamental safety and protection requirements stipulated in the BetrSichV 2015. A risk assessment according to BetrSichV is required to determine if the minimum necessary protection targets are met.