Avtomatska krožna žaga za aluminij

Kaltenbach SKL 400 NA

Stanje: novo, Leto izdelave: 2025, Quick mitre adjustment from 30° to 150° steplessly with 0.5° accuracy according to scale. The mitre pivot point is at the intersection of the saw blade and the material stop, ensuring no change in the length dimension. End stops at 30° + 45° left and 30° + 45° right. Manual material clamping. In every frame angle position, the material is clamped parallel at 90°. Cutting pressure reduction is achieved by the dead weight of the heavy, torsion-resistant saw frame, with fine adjustment according to material cross-section via a hydraulic damping cylinder. Standard with coolant system, which can optionally be supplemented by a micro-dosing unit. Machine base with chip collection tray. Saw blade drive with end shut-off. Precision saw blade carbide roller guides. Paint finish in silver-grey / blue-grey (RAL 7001 / RAL 7031). 1 saw blade mounted on the machine 4/6 TPI Operating manual and spare parts list on CD-ROM. Ksdpfxjbi S Die Abredw Optional equipment: Hydraulic lifting of the saw frame Version Manual Mitre capacity: 30° left ø 130 mm; square 120x120 mm 45° left ø 200 mm; square 180x180 mm 90° ø 260 mm; square 300x260 mm 45° right ø 200 mm; square 180x180 mm 30° right ø 130 mm; square 120x120 mm Motor: [kW] 1.8 Saw blade: [mm] 3350x27x0.9 Saw blade speed: 35/75 m/min Working height: [mm] 900

Stanje: rabljeno, Mitre Cold Circular Saw Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of manufacture 1983 Saw blade diameter: 400 mm Cutting range at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting range at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 stages Ksded N H A Nspfx Abredw Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor left side, 1500 mm - Feed stroke via double feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut saw angle adjustable manually - Hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for saw blade speed - Saw blade lift infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to main machine body - Piece counter with zero shut-off Machine dimensions (L x W x H): 2600 x 1200 x 1900 mm Weight: approx. 1400 kg Good condition

Stanje: rabljeno, Leto izdelave: 1983, Saw blade diameter: 400 mm Cutting diameter: 130 mm Stroke: 150 mm Cutting range, square: 120 x 120 mm Cutting range, flat: 300 x 40 mm Cutting capacity at 45°: round 130 mm Cutting capacity at 45°: square 110 x 110 mm Cutting capacity at 45°: flat 245 x 40 mm Mitre cuts: both sides, 90° Cutting speed: 13 / 25 m/min Control: minipos 807 Total power requirement: 4.3 kW Machine weight approx. 850 kg Kdedpfx Ajtqqrzobrsw Machine dimensions (L x W x H): 1.20 x 1.20 x 1.82 m Accessories: infeed and outfeed roller conveyors, each approx. 4,000 mm long, NC stop, coolant system

Stanje: dober (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 400 mm, Obseg rezanja okroglega jekla pri 90°: 145 mm, skupna dolžina: 850 mm, skupna višina: 1.800 mm, skupna širina: 1.100 mm, skupna masa: 700 kg, Semi-automatic cold circular saw, new saw blade Ø 400 mm, cutting capacity approx. Ø 145 mm, motor 3.0 / 4.0 kW, 2-speed 1420/2880 rpm, vertical clamp, 2 manual horizontal clamps, stops at 30°, 45°, 60°, and 90° on both sides, coolant system, dimensions 85x110x180 cm, weight approx. 700 kg Ksdjwp Ipxjpfx Abrjdw

Stanje: pripravljen za uporabo (rabljen), Saw blade diameter: 450 mm, cutting width: 4 mm, saw blade type: carbide-tipped (HM) / high-speed steel (HSS), bore diameter: 50 mm, mounting screws: 4, bolt circle for mounting screws: 80 mm, screw diameter: M12. Saw blade feed rate: 3.5 m/min, rapid return: 4.5 m/min, infeed speed: 10 m/min / 20 m/min, single stroke cut length: 10 mm / 1000 mm, double stroke: 2000 mm, rotary table swivel range: +/-90°. Machine dimensions (L/W/H): approx. 2700 mm / 1450 mm / 1900 mm, weight: approx. 1500 kg. Documentation available. An on-site inspection is possible. Kdedpfev Hgkqox Abrsw