Dizelski viličarji

Kalmar DCG90-6

Stanje: dober (rabljeno), številka stroja/vozila: 3288, Leto izdelave: 2015, nosilnost: 9.000 kg, dvižna višina: 5.050 mm, tip droga: dupleks, širina nosilnega okvirja vilic: 150 mm, dolžina vilic: 2.400 mm, skupna dolžina: 4.640 mm, skupna širina: 2.460 mm, obratovalna teža: 16.060 kg, dodatne značilnosti opreme: Front mud guards, Rear mud guards, Warning triangle, Fire extinguisher , Dual tread, Manual sliding cabin, Oprema: osvetlitev, Kalmar DCG90-6 od Uniktruck Rjdpfx Asul D Nkobhon

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Type of machining: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table dimensions: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L X, Y, Z, U and V axes Travel X, Y, Z: 550 x 350 x 400 mm Travel U, V: 550 x 350 mm Collision protection: X, Y, U, V, Z axes Taper cutting, max. angle: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options 0.1/0.2/0.3 mm) Wire guide type: closed diamond, no gap Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum achievable surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type Rsdpfx Aew Ucyuobhjn All technical data is given without obligation and subject to errors or omissions.

Stanje: rabljeno, Leto izdelave: 2009, Offered here is a used machining centre from the manufacturer Deckel Maho DMG. The machine is under power and can be inspected at our facility. Ex works, loaded on truck Rsdpfxew Ew T Sj Abhon Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel X, Y, Z axes: 1250 x 1000 x 1000 mm Feed rate X, Y, Z axes: 20 - 60,000 mm/min Rapid traverse X, Y, Z axes: 60 m/min B-Axis travel: 360 x 0.001° B-Axis feed rate: 10,800°/min Max. table rotation speed: 30 rpm Spindle speed: 20 - 8,000 rpm Gear ranges: 2 Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Clamping area: 800 x 800 mm Max. workpiece weight: 1,500 kg Pallet weight: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Required space: approx. 7,000 x 6,000 mm Total weight of the machine: 24,000 kg Accessories: - Chip conveyor with coolant tank - Coolant system - 4x machine pallets - Tool magazine - Oil mist extraction - Various new spare parts: 1x Y-axis length measuring system (new) 1x lubrication unit 230V 0.12 30bar (new) 1x gear unit P-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox F1C-A25 (new) 1x retrofit kit power module (new) 1x lifting devices for the machine

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2005, obratovalne ure: 48.898 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.000 mm, proizvajalec krmilnikov: Heidenhain iTNC 530, teža obdelovanca (maks.): 2.000 kg, skupna višina: 3.400 mm, skupna dolžina: 6.000 mm, skupna širina: 4.500 mm, vrtljajska hitrost (min.): 30 obr/min, skupna masa: 15.800 kg, hitrost vretena (min.): 18.000 obr/min, število mest v zalogovniku orodij: 40, Year of manufacture: 2005 CNC control: Heidenhain iTNC 530 Axes Travel X-axis (mm): 1000 Travel Y-axis (mm): 1000 Travel Z-axis (mm): 1000 C-axis indexing (degrees): 360° (0.001) Rsdexur Sxopfx Abhen A-axis indexing (degrees): 130° B-axis indexing (degrees): 0–190° Feed rates (m/min): 60 Rapid traverse (m/min): 60 NC milling/rotary table: Number of pallets: 1 Pallet dimensions (mm): Ø1100x900 Max. workpiece weight (kg): 2000 Table rotation speed (rpm): 30 Spindle Max. spindle speed (rpm): 18000 Cooling Coolant supply through spindle (bar): 40 Tank capacity (liters): 980 High-pressure coolant (bar): 40–80 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 40 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Infrared touch probe Rinsing gun Selectable spindle center air blast via M function Laser tool measurement for tool length and diameter 3D quickSET Prepared for internal coolant supply (40/80 bar) Paper band filter Machine runtime: Power-on hours: 144,180 Spindle running hours: 48,898 Total power requirement (kVA): 65 Base machine: Dimensions/Weight Length (mm): 6000 Width (mm): 4500 Height (mm): 3400 Weight (kg): 15,800

Stanje: novo, – Semi-automatic – Hydraulic – Infinitely variable bandsaw speed adjustment – Double mitre Rodpfx Aovkkl Tsbhsn – Hydraulic clamping of the mitre setting – Saw feed pressure hydraulically adjustable – Fully hydraulic material clamping – Hydraulically adjustable clamping pressure – Coolant system – Automatic shut-off – Automatic machine shut-off in case of: open cover, broken blade, insufficient blade tension – Emergency stop – Documentation – 400V

Stanje: dober (rabljeno), Leto izdelave: 2007, 1 used CNC tool grinding machine Make: Schneeberger Model: Corvus GDS 650 Year of manufacture: 2007 CNC control: FANUC 160i Software: Quinto 4.3 Active software option numbers: 1, 2, 19, 21, 22, 30, 31, 32, 35 - Fanuc loading robot - Coolant system Travel axes: X-axis: 650 mm Y-axis: 300 mm Z-axis: 300 mm C-axis swivel angle: +150° / -60° C’ axis swivel angle: +/- 180° Grinding spindle: Wheel diameter up to 250 mm Speed: 0–10,000 rpm Max. spindle power: 26 kW Mount: HSK 80 Max. number of grinding wheels: 6 Workpiece headstock: Vmax: 180°/s Drive power: 1.6 kW Mount: ISO 50 Precision (resolution): Redpfx Absu A Dn Nohen Linear axes resolution: 0.001 mm C-axis: 0.001° Dimensions: Length: 3100 mm Width: 1915 mm Height: 2190 mm Weight: 8,500 kg U-axis is equipped with steady rest, clamping cylinder and tailstock 6-pallet loader (diameter 3 to 32 mm) 64 plastic bushings Technical data subject to change/errors.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Required space: approx. 3.6 x 3.5 m As a global leader in Kellenberger overhauls/retrofits, we are able not only to deliver machines in as-new quality with warranty, but also to provide comprehensive service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical overhaul: - Complete machine overhauled according to Kellenberger measurement protocol Rjdsuwv H Tjpfx Abhjn - New, service-friendly enclosure - Repainted Electrical overhaul: - New modern CNC cylindrical grinding machine control with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical cables, limit switches, etc. - New absolute glass scales on X and Z axes - New absolute rotary encoder (on B axis) Standard equipment: - Workhead with MK5 taper, optionally with MK5/short taper adapter - Tailstock with MK4 taper, optionally with fine adjustment - Grinding spindle head T1 / T2 / T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment, belt-driven by grinding spindle motor - Grinding spindle motor 4.4 kW - High-resolution B axis - Marposs measuring system for grinding wheel measurement - Longitudinal positioning Marposs - GAP control (sensor on grinding spindle head) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Optional extras at additional cost: - HF internal grinding spindle - High-precision, maximum rigidity workhead - Measuring control - Extraction unit - Paper band filter Control system: Basic grinding cycles: - Zero-setting workpiece with Z position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Touch sensor GAP - Measurement of dressing diamonds - Corrections - External and internal cylindrical grinding (oscillation and plunge grinding) - External and internal taper grinding (B axis swivelling, dressing with straight wheel) - External and internal radius grinding (radius dressed on wheel) Optional grinding cycles: - Profile plunge grinding, external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single- and multi-thread external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-round grinding, external and internal Price: 15,000

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, dolžina brušenja: 620 mm, širina na sredini: 680 mm, premer brusilnega koluta: 350 mm, skupna širina: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete dismantling of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand scraping of the X-axis guideway - Hand scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) Rjdjrz Nfljpfx Abhsn - Preparation of a measurement protocol for the TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be newly painted; the rest of the machine will retain its original paintwork. Electronics: The entire machine's electronics will be inspected, tested, and any defective switches and cables will be replaced.

Leto izdelave: 2007, Stanje: generalkompletno obnovljen (rabljeno), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (non-submerged) Achievable surface quality: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and re-threading after wire breakage Equipped with manual front door (accessible from one side) Including AGIEJOGGER handbox for easy machine setup AGIE IPG-V generator AGIEVISION 5 control Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and completely overhauled at our facility upon order placement. Redpfemmfwuex Abhjn A 6-month warranty is provided on all machine components. Commissioning and training services are available upon request.

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Redpfxofxyhfo Abhsn Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.