Stroj za žično erozijo (žični EDM)

CHARMILLES Robofil 440

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, obratovalne ure: 15.125 h, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 1.500 kg, potovalna razdalja osi X: 550 mm, pomik osi Y: 350 mm, pomik po osi Z: 400 mm, skupna višina: 200 mm, skupna dolžina: 260 mm, skupna širina: 280 mm, višina obdelovanca (maks.): 400 mm, širina obdelovanca (maks.): 700 mm, dolžina obdelovanca (maks.): 1.200 mm, vrsta vhodnega toka: trifazni, skupna masa: 3.300 kg, Charmilles Robofil 440SLP, year 2007. Bedpfxsv Rbxws Ag Tscw Only 15,100 operating hours. Machine fully overhauled and in working condition. Can be inspected at our premises in Semsales, Switzerland.

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Bsdpfxsfxyhfo Ag Tjcw Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Leto izdelave: 2005, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 935089, - Water bath machine with automatic wire threading - Enclosed diamond wire guides for various wire diameters - Collision protection on all 5 axes (ICP) - Pictured clamping accessories included in the scope of delivery TECHNICAL DETAILS Travel paths X / Y / Z: 550 / 350 / 400 mm Travel paths U/V axis: 550 / 350 mm Taper capacity: max. +/- 30° at 400 mm height Workpiece dimensions: max. 1200 x 700 x 400 mm Opening width: 1020 mm (accessible from one side) Workpiece weight: max. 1500 kg Surface finish: max. Ra 0.22 μm Cutting speed: max. 300 sq mm/min Available wire diameters: 0.15 – 0.30 mm Control: Charmilles Millenium with Windows operating system (12” TFT touchscreen) MACHINE DETAILS Dimensions (L x W x H): 2600 x 2810 x 2240 mm Net weight: 3300 kg Connection voltage: 400 V / 3-phase / 50/60 Hz Bjdpfjlru Rbjx Ag Tocw Connected load: 10 kVA LAN connection: included, for network integration

Stanje: rabljeno, Leto izdelave: 2016, Operating hours machine: 5,320 h Max. feed width: 300 mm Processable sheet thickness: 1-15 mm Voltage: 400V / 50 Hz Rated current: 13.5 A Rated power: 7.5 kW Protection class: IP42 Infinitely variable feed rate: 0-2 m/min Length: 2,600 mm Width: 2,300 mm Height: 1,300 mm Machine weight: 1,900 kg Standard equipment - With vacuum table for processing steel, stainless steel, and aluminium for part sizes from 45 x 45 x 1 mm up to a maximum of 200 x 200 x 15 mm (geometry-dependent) - Time-consuming turning and reworking of parts is eliminated - Thanks to the innovative swivelling station, parts with an edge length of more than 200 mm can also be processed on one side by folding away the station - High degree of automation enables economical and process-safe processing of large quantities of parts - High and consistent processing quality - Dry processing (no chemical additives required, as is the case with vibratory finishing) - Small parts are discharged on the loading side and collected in a catch box - No additional walking routes for the operator - Energy efficient - The processing principle ensures uniform tool wear across the entire working width Bodpfxev N I Hls Ag Tocw - Fast and simple tool change - Simple and intuitive machine operation - Modern, compact machine design Additional equipment Lissmac DDE 1500 extraction unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, potovalna razdalja osi X: 2.050 mm, pomik osi Y: 850 mm, pomik po osi Z: 750 mm, število mest v zalogovniku orodij: 36, dolžina mize: 2.200 mm, širina mize: 850 mm, model krmilnika: OKUMA-OSP-HMI, dovod hladilne tekočine: 15 letvica, razdalja od središča mize do nosu vretena: 950 mm, moč vretenovega motorja: 22 W, število vreten: 36, hitri pomik na osi Z: 16 m/min, hitro pomikanje X-os: 16 m/min, hitri pomik os Y: 16 m/min, nos vretena: BT 50, največja hitrost vretena: 10.000 obr/min, hitrost vretena (min.): 50 obr/min, obremenitev mize: 2.500 kg, premer orodja: 120 mm, dolžina orodja: 400 mm, teža orodja: 20 g, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, 3-axis vertical machining centre with OKUMA OSP-HMI CNC Bodpfxou Dinks Ag Tscw

Stanje: pripravljen za uporabo (rabljen), skupna višina: 3.300 mm, skupna širina: 3.450 mm, skupna dolžina: 6.000 mm, proizvajalec krmilnikov: Siemens, lastna masa: 17.000 kg, Model: FTV 850 Hlajenje skozi vreteno Delovno območje se lahko razdeli na dva dela 2 magnetni mizi Premični steber, podoben Mazak VTC / Unisign / Hedelius Težka konstrukcija ogrodja Vzdolžno pomikanje X-os: 1800 mm Bcedpfewxz D Usx Ag Tew Prečno pomikanje Y-os: 850 mm Vertikalno pomikanje Z-os (višina): 800 mm Dimenzije vpenjalnega prostora – miza: 2300 x 900 mm Univerzalna glava (2x 360°): ISO 50 Vrtalna glava (1 x90°): 19 kW

Stanje: rabljeno, Leto izdelave: 2014, Workpiece length: 100 mm Swing diameter: 80 mm Number of spindles: 2 Control system: FANUC 31i-B5 Workpiece weight: 2.00 kg Centre height: 170 mm Grinding wheel diameter: 100 mm Grinding wheel bore: 32 mm Max. grinding wheel width: 20 mm Bcsdpfx Aovx Uvfeg Tjw Max. peripheral speed: 125 m/sec Steady rest passage: 45 - 60 mm Total connected load: 75.00 kW Machine weight approx.: 25.00 t Space requirement approx.: 5.00 x 3.50 x H3.50 m Cam grinding machine for cam components. Equipped with FANUC 31i-B5 control for non-cylindrical grinding; loading gantry; CO2 extinguishing system; suitable for CBN grinding wheels; tailstock; steady rest; diamond wheel dresser for the grinding wheel mounted on the dressing spindle; grinding spindle stock version 12 (two grinding spindles independently movable).

Stanje: dober (rabljeno), Leto izdelave: 2007, 1 used CNC tool grinding machine Make: Schneeberger Model: Corvus GDS 650 Year of manufacture: 2007 CNC control: FANUC 160i Software: Quinto 4.3 Active software option numbers: 1, 2, 19, 21, 22, 30, 31, 32, 35 - Fanuc loading robot - Coolant system Travel axes: X-axis: 650 mm Bcjdpfx Ageu A Dn Ne Tjw Y-axis: 300 mm Z-axis: 300 mm C-axis swivel angle: +150° / -60° C’ axis swivel angle: +/- 180° Grinding spindle: Wheel diameter up to 250 mm Speed: 0–10,000 rpm Max. spindle power: 26 kW Mount: HSK 80 Max. number of grinding wheels: 6 Workpiece headstock: Vmax: 180°/s Drive power: 1.6 kW Mount: ISO 50 Precision (resolution): Linear axes resolution: 0.001 mm C-axis: 0.001° Dimensions: Length: 3100 mm Width: 1915 mm Height: 2190 mm Weight: 8,500 kg U-axis is equipped with steady rest, clamping cylinder and tailstock 6-pallet loader (diameter 3 to 32 mm) 64 plastic bushings Technical data subject to change/errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009,

Stanje: dober (rabljeno), Leto izdelave: 2005, Hurco machining center VMX 1, condition as shown in the pictures Bodpfov Nzucjx Ag Tjcw