Brusilnik s širokim pasom

Kündig PRIMO - 1100 - E

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vrsta nastavitve višine: električni, moč: 7,5 kW (10,20 KM), Tilting Spindle Moulder HOFMANN TFS 107 Standard Equipment: - 7.5 kW motor, 400 V, 50 Hz - Table size 1,200 x 815 mm, heavily ribbed cast iron table, with table rings - Electronic soft start and brake device - Electric height and tilt adjustment for rapid and fine feed, accurate to 0.1 mm, height adjustment approx. 145 mm - Tilt adjustment +/- 45.5° - 4 spindle speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm - Milling fence, type 2601 Efficient, with multiplex fence jaws - Fixed spindle, Ø 30 mm with quick-release nut "fix" - Forward/reverse rotation, machine socket, arc guard type TAPOA, Hofmann "Centrex" - Paint finish: grey white/signal blue Electrical connection: Ksdpfxeu Nz Nde Ahvend Motor power: 7.5 kW – Minimum fuse (A): slow 30 Additional equipment installed on this machine: - Table size 2,000 x 815 mm with extendable support (480 mm extension) instead of standard table - Infinitely variable spindle speed control for TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor (replacing standard soft start motor) - HOFMANN spindle fence type 2620 instead of standard fence 2601 Efficient. Total adjustment via handwheel with display, including switchover to tooling zero point. Digital display for individual fence jaw adjustment. Includes quick-release system for fence jaws - 2 cast iron fence jaws, 500/500 mm - Guide rails and rebate board, consisting of 5 rulers, 1 rebate board, 10 guide pads - Raised control panel - Tool compartment for TFS 107 (only possible with raised control panel) - Operating manual TFS 107, German

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Pneumatic connection: 7 bar Total length: 5220 mm Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Kodpsc Tmygsfx Ahvjnd Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted End trimming Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Infrared heater CE compliant Note on used machines: • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, The Brugger SA38 saw-splitter impresses with a powerful splitting force of 12 tonnes and is the ideal solution for the quick and uncomplicated processing of logs into premium firewood. Effortlessly, logs up to 38 cm in diameter can be converted into firewood. The SA38 stands out due to its simple yet well-engineered design, which not only ensures high reliability but also facilitates maintenance and repairs. Technical Data • Up to 38 cm log diameter • 12-tonne splitting force • 50 cm Oregon bar • Log lengths from 20 to 50 cm • Optional log lifter or chain conveyor available • Weight: 450 kg Depending on your individual requirements, you have various drive options available, including a powerful 14 HP Kohler petrol engine, a 7.5 kW 400V electric motor, or a PTO drive with three-point linkage. Prices Brugger SA38 base – €5,499 Infeed conveyor 100 cm – €590 Discharge conveyor 350 cm – €895 Knodpfxspz I I Ho Ahvod 6-way splitting wedge – €199 Additional PTO drive (for electric or petrol version): €949 Chain conveyor – €1,898 Log lifter – €1,498

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.300 mm, višina brušenja: 160 mm, vrsta nastavitve višine: električni, dolžina brusnega traku: 2.150 mm, Heesemann JSM 1350 RC Wide Belt Sander Year of manufacture: 2025, new machine, currently the only exhibition unit available in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Infinitely variable feed speed: 3 - 12 m/min - Sanding units with separate motors and infinitely variable belt speeds up to 18 m/s - Table extensions at infeed and outfeed - Industrial PC 15.6" - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Belt dimensions: 2,150 x 1,370 mm Knjdpfx Aowcqr Ajhvsd Belt speeds: 18 m/s Drive power: 15 kW Front calibration return roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System (EMS) - Doors with glass inserts - LED lighting inside the machine - Vacuum table prepared (bored) for connection of the vacuum blower - Vacuum blower (integrated in the machine) - Workpiece cleaning with oscillating air jet pipe - CSD (magnetic pressure beam) The machine is connected and can be inspected on site by appointment. If you have any questions, please do not hesitate to contact us.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Dieses Kundig Premium-2 1100-RE Bandschleifmaschine wurde 2007 hergestellt. Sie ist ideal für die Holzbearbeitung geeignet und bietet ein robustes Design für eine gleichbleibend hohe Leistung. Nutzen Sie die Gelegenheit, diese Kundig Premium-2 1100-RE Bandschleifmaschine zu erwerben. Kontaktieren Sie uns für weitere Informationen. Kjdpfx Aewb Imnjhvjnd Anwendungsbereiche: Schleifen

Stanje: novo, Leto izdelave: 2025, Spindle Tilting: +45.5° to -45.5° Height Adjustment: electric Tilting Adjustment: electric Fence Adjustment: electric Height Display: digital Tilting Angle Display: digital Spindle Fence Display: digital Spindle Diameter: Speeds: stepless from 900 to 12,000 rpm Power Consumption: 7.5 kW Motor Brake: Yes, automatic Extraction Connection: 3 x 100 mm, 1 x 120 mm Knjdpjiqg N Njfx Ahvsd Machine Length: 2,540 mm Machine Width: 1,195 mm Weight: 950 kg

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Sanding width: 1100 mm Workpiece thickness: 3 - 160 mm Knedpfx Aswkuwxohvod 2 sanding units 1st unit: calibrating roller 2nd unit: combination roller-pad unit Structuring brush unit

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Knsdpfew Naanex Ahvjd Please note that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Specification and technical data: The Master delivers precision sanding. It encapsulates the essence of our 75 years’ experience in sanding technology. This means it comes equipped "out of the box" with all the features essential for fast, reliable production of perfect surfaces—nothing more, nothing less. The core model Kündig Master is fitted with a calibration roller and a sanding pad unit, based on a proven design that guarantees long-term maintenance of high sanding precision—even across its generous working width of 1350 mm. In addition, a control unit is integrated for fast and intuitive operation. Sanding units – Proven combination The sanding system relies on a tried-and-tested combination of calibration roller and sanding pad. For optimal workpiece guidance, a parallel-sprung steel pressure roller is fitted at the machine infeed, with rubber pressure rollers placed between the sanding units. Calibration Unit (R): The calibration unit consists of a grooved rubber contact roller of proven hardness. It is ideal for calibration tasks, even for higher material removal rates if required. The contact roller level is infinitely adjustable to compensate for the thickness of the inserted abrasive grain. Segmented sanding pad (E): Equipped with the E-Plus configuration, the fine sanding unit features—not pneumatically, but—an electronically controlled, segmented sanding pad with a scanning width of 35 mm. This enables even more precise fine sanding at the edges of workpieces. The edge pressure of the sanding segments is automatically regulated, but can also be precisely adjusted via the touchscreen to further refine the finish around the workpiece edges. Changing the graphite glide belt is also quick and easy. Equipment – At a glance Construction: In terms of robustness and durability, the Master is on par with our other model ranges. It benefits from the same solid construction that makes all of our machines long-term investments, and is designed to deliver precise sanding results for many years. Upper section adjustment: For over thirty years, we have equipped our machines exclusively with upper section adjustment. Why? Although it is more complex to engineer than table adjustment, it offers numerous advantages: Greater permissible workpiece weights, better long-term precision, and the consistent working height. Workpiece dimensions: Adjustment of the upper section (clearance opening) is motorized and finely regulated via touchscreen. The maximum clearance height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, well-established standard dimension.

Stanje: dober (rabljeno), Leto izdelave: 2001, • Grinding width (mm): 1100 • Workpiece thickness (mm): 3 - 150 • Total grinding units: 1 • Longitudinal belt: 1 • Calibration roller • Cleaning brush: 1 x diameter = 120 mm • Vacuum table • Intermediate lacquer sanding Kedoww Iatopfx Ahvjnd • Constant table height • Carpet cleaning • Longitudinal unit, motor: 15 kW, 1.8 - 18 m/s • Feed rate: 3 - 11 m/min • Abrasive belt length, longitudinal unit (mm): 1,900 x 1,120 • Pressure beam: CSD system, electromagnetic, wear-free • Availability: tested, in stock

Stanje: rabljeno, working width 900mm calibrating unit with steel roller combi unit with rubber roller and sanding shoe pneumatically lifted sanding shoe pneumatic oscillation pneumatic belt tensioning star/delta starter Knjdow Dq D Uopfx Ahvsd two feed speeds electric table height adjustment (up/down) material thickness gauge