Brusilnik s širokim pasom

Kündig Perfect-3 1350 REdXi_LL/BS verfügbar

Automatic Sander KÜNDIG PERFECT-3 1350-REdXi_LL/Bs incl. structuring unit

Robust 3-wide belt sander for the highest demands
Consistent working height thanks to upper section adjustment
Working width: 1350 mm
Pass-through height max.: 205 mm (up to 18.5 kW main drive motor)
Abrasive belt dimensions for "R" and "Ed-L": 1350 x 2000 mm
Abrasive belt dimensions for "Xi-L": 150 x 4700 mm

Dodpfx Afer Hr Dzsloul
Unit "R" – Contact Roller
- Grooved rubber contact roller, hardness 80 Shore
- Contact roller height continuously adjustable via touch screen
- Motorized lifting/lowering of the contact roller depending on aggregate selection
- Increased belt speed

Unit "Ed-L" – Diagonal Pad
- Electronic sanding pad with 22 mm segment width (special pivoting version), with variable edge pressure, automatic pressure regulation, and segment memory
- Continuously adjustable belt speed (PLC-stored)
- Additional sanding pad insert

Unit "Xi-L" – Cross Sanding Unit Integrated in Machine Body
- Electronic sanding pad with 22 mm segment width, variable edge pressure, automatic pressure regulation, and memory for sanding pad segments
- Cross sanding belt supported by lamella belt
- Continuously adjustable belt speed (PLC-stored)

Perfect-3 1350-REdXi-LL

Main motors:
- 1st unit: 18.5 kW (25 HP)
- 2nd unit: 11 kW (15 HP)
- 3rd unit: 16 kW (MPM) (22 HP)
400 V / 50 Hz

Workpiece feed:
- Fabric-reinforced rubber conveyor belt
- Rubberized conveyor drive roller
- Motor: 2.2 kW (3 HP) / 400 V / 50 Hz
- Speed: infinitely variable 3 - 15 m/min

Vacuum system:
- On feed table
- Additional perforation of conveyor belt over 200 mm
- Vacuum generator: 2.2 kW (3 HP) / 400 V / 50 Hz

Abrasive belt cleaning:
- Air knife for cleaning the abrasive belt in "Ed-L" and "Xi-L" units, cycle-controlled, with extraction channels, driven by blower 1.1 kW (1.5 HP) 400 V / 50 Hz

Pressure elements:
- Infeed: parallel spring-mounted, ground steel pressure roller ⌀ 50 mm
- Between units: rubberized pressure roller ⌀ 50 mm
- Outfeed: rubberized pressure roller ⌀ 50 mm

1. Grooved rubber contact roller, 80 Shore
2. Diagonal sanding pad with paint configuration and air knife for belt cleaning
3. Cross sanding unit with paint configuration and air knife for belt cleaning

Main motors: 18.5 + 11 + 16 kW / 400V / 50 Hz

Additional equipment:
W61: Structuring unit at outfeed
B 10: Abralon structuring brush, Mink
W71: Additional quick-change shaft for 1350 mm brush
B 12: Brass-coated steel wire brush 1350 mm
C 10: LED package
A 20: 5 x motorized adjustment dampers (2x D=180 + 3x D=150 mm)
Working width: 1350 mm
Max. workpiece height: 205 mm
Abrasive belt dimensions: 1350x2000 mm and 150x4700 mm
10” touch screen with Industry 4.0 control

Location: Ex stock 54634 Bitburg
- Immediately available -

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.