Priklopnik sedeža z delovno ploščadjo

KÖGEL Multi Chassis. verstärkt, Rungen

You can find our complete range of vehicles, including those available immediately or at short notice, on our website.

Excerpt from the equipment. Full specification available upon request.

Chassis:
* Standard ladder-type frame made of lightweight steel with inserted cross members
* Chassis frame with upward camber
* Coupling plate approx. 8 mm thick, fitted with a 2” king pin in accordance with DIN 74080 / ISO 337

Running Gear:
Itedpfjyvnd Aox Adked
* Axle lift mechanism on axle 1
* Fully automatic, load-dependent axle lift control
* Start assist: activation via braking three times, up to 30% overload permitted up to 25 km/h
* Manufacturer of choice: Kögel – three-axle unit, with disc brakes, diameter approx. 430 mm
* Air suspension with approx. 180 mm stroke

Vehicle Tyres:
* Wheels with internal sensors according to UN ECE R141
* Tyres: 6 x 385/65 R 22.5 BRIDGESTONE R179 XM 160 K (158 L)
* 6 steel rims, 22.5 x 11.75, offset approx. 120 mm (ET 120)

Chassis Attachments:
* Landing legs (manufacturer of choice by Kögel), mechanical with compensating foot, approx. 24 t lifting capacity. Operation from the right side in driving direction
* Spray suppression system (spray mist suppression) in accordance with Regulation (EU) No. 109/2011 for three-axle units with 385/65 R22.5 tyres, consisting of 1 pair quarter-circle mudguards ahead of the axles, 1 pair straight mudguards with spray flaps between the 1st and 2nd axle, and 1 pair quarter-circle mudguards with spray flaps behind the axles
* 2 wheel chocks with holders
* Side protection in accordance with ECE-R73
* 2 waterproof plastic toolboxes, dimensions (internal) approx. 545 x 400 x 400 mm, installed at the rear, 1 on the left and 1 on the right
* Rear access ladder at the right, extendable
* High, rigid steel rear underrun protection to ECE-R58
* 1 pair each of extendable warning boards for oversize loads, retroreflective red/white, with LED illumination, spiral cable and plug connection. Mounted at the front and rear areas of the vehicle

Brake / Air Suspension System:
* EBS system 2S/2M with stability program (includes ABS/ALB function), EBS socket ISO 7638 (without supply lines), parking brake as spring-loaded brake, external pneumatic connectors, plus external EBS diagnostic connection via ISO 7638 socket
* EBS system (manufacturer of choice by Kögel)
* Air suspension system incl. 1 raise/lower valve, installed on the left behind the axle unit. Transport level is set automatically
* 2 mismating-proof coupling heads at the front, ISO 1728
* Air tanks for brakes and air supply made of steel (EN 286-2)

Floor:
* Board floor approx. 30 mm thick
* Floor jointed all round
* Stake pockets for square tube stakes approx. 80 x 80 mm

Front Wall:
* Storage for up to 20 square tube stakes (approx. 80 x 80 mm, approx. 1,990 mm long) on the inside of the front wall
* Front wall approx. 2,000 mm high with steel volume corner posts, profiled steel sheet, bolted/riveted to the frame
* 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front bulkhead to EN 12640

Side Wall:
* VarioFix steel slotted outer frame
* 21 pairs of lashing rings in the outer frame (to EN 12640), permissible tractive force approx. 5,000 kg per ring

Bumper Protection:
* 1 pair steel buffer blocks approx. 160x85x85 mm mounted externally at the frame end plate
* Transverse galvanized steel angle as forklift protection, as well as lock cam protection in the center, mounted on the rear frame end plate

Electrics

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.