Priklopnik sedeža z delovno ploščadjo

KÖGEL Multi Chassis. Rungen

Our entire vehicle inventory, including immediately and short-term available vehicles, can be found on our website.

Excerpt from equipment. Complete equipment specification available upon request.

Frame:
* Conventional ladder-type frame in lightweight steel construction with through-bolted cross members
* With pre-cambered chassis frame
* Coupling plate approx. 8 mm thick, with a 2-inch fifth wheel kingpin according to DIN 74080 / ISO 337

Running Gear:
* For indivisible loads, an increase in the total permissible towing weight is allowed
* Axle lift mechanism on axle 1; automatic, load-dependent axle lift control
* Manufacturer of choice Kögel
* Three-axle assembly with disc brakes, diameter approx. 430 mm, insertion depth approx. 120 mm
* Air suspension with approx. 180 mm stroke

Vehicle Tyres:
* Wheels with internal sensors as per UN ECE R141
* 6x 385/65 R 22.5 UNIROYAL TH 506 tyres, steel rims 22.5 x 11.75, insertion depth approx. 120 mm (ET 120)

Chassis Attachments:
* Landing legs (manufacturer of choice from Kögel), mechanical with compensating foot, approx. 24 t lifting capacity. Single-sided operation on the right in the direction of travel
* Splash guard system (spray suppression) according to Regulation (EU) No. 109/2011
* 1 pair of quarter-circle mudguards in front of the axles
* 1 pair of straight mudguards with mud flaps between the 1st and 2nd axle
* 1 pair of quarter-circle mudguards with mud flaps behind the axles
* 2 wheel chocks with holders
* Side underrun protection according to ECE-R732
* Waterproof plastic toolboxes, internal dimensions approx. 545 x 400 x 400 mm. Mounted at the rear, one each on left and right
* Rear right access ladder, extendable; high, rigid rear underrun protection made of steel in accordance with ECE-R58
* One pair each of extendable warning signs for oversize loads, retro-reflective red/white, with LED lighting, spiral cable, and plug connection. Positioned at the front and rear of the vehicle

Brake / Air Suspension System:
* EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connecting lines), parking brake as spring-actuated brake, external pneumatic connections as well as external EBS diagnostic connector via ISO 7638
* EBS system (manufacturer of choice from Kögel)
* Air suspension system incl. 1 raise and lower valve, mounted left behind the axle assembly in direction of travel. Ride height self-adjusting
* 2 fail-safe coupling heads at the front ISO 1728
* Air tanks for brake system and air supply, made of steel (EN 286-2)

Floor:
* Panel floor approx. 30 mm thick
* Floor circumferentially sealed
* Stake pockets for square tube insert stakes approx. 80 x 80 mm, arrangement according to drawing J9: 8 stake pocket strips (18 stake pockets per strip: 4 each outer + 10 central)

Front Wall:
* Storage for up to 14 square tube insert stakes approx. 80 x 80 mm (length approx. 1,990 mm) on the inside front wall
* Front wall approx. 2,000 mm high with volumetric corner stakes made of steel, profiled steel plate, bolted/riveted with the frame. 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) at the front wall according to EN 12640
Kjdpfx Abex Uvlfobswt

Side Wall:
* VarioFix steel perforated external frame
* 24 pairs of lashing brackets in the external frame (according to EN 12640), permissible tensile force approx. 5,000 kg per ring

Collision Protection:
* 1 pair of steel bumpers approx. 160x85x85mm mounted on the outside o

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.