Priklopnik sedeža z delovno ploščadjo

KÖGEL Multi Chassis. Rungen

Frame
* Standard ladder-type frame made of lightweight steel construction with through-bolted crossmembers
* With chassis frame camber (pre-cambering)
* Coupling plate approx. 8 mm thick, with a 2-inch king pin in accordance with DIN 74080 / ISO 337

Chassis
* For indivisible loads, an increase of the total towing weight is permissible
* Axle lift on axle 1, fully automatic, load-dependent control of the axle lift
* Manufacturer of choice: Kögel
* Tri-axle assembly with disc brakes, Ø approx. 430 mm, offset approx. 120 mm
* Air suspension with approx. 180 mm stroke

Vehicle tyres
* Wheels with internal sensors according to UN ECE R141
* Tyres: 6 x 385/65 R 22.5 UNIROYAL TH 50
* 6 steel rims, size 22.5 x 11.75, offset approx. 120 mm (ET 120)

Chassis attachments
* Landing legs (manufacturer of choice from Kögel), mechanically operated with compensation foot, approx. 24 t lifting capacity. Single-sided operation on the right in travel direction
* Spray suppression system according to Regulation (EU) No. 109/2011
* 1 pair quarter-circle mudguards in front of the axles
* 1 pair straight mudguards with mudflaps between the 1st and 2nd axle
* 1 pair quarter-circle mudguards with mudflaps behind the axles
* 2 wheel chocks with holders
* Side guard according to ECE-R73
* 2 waterproof plastic toolboxes, inside dimensions approx. 545 x 400 x 400 mm, mounted at the rear, 1x left and 1x right
* Retractable access ladder at the rear right
* High, rigid rear underrun protection made of steel, according to ECE-R58
* 1 pair each of extendable, retro-reflective red/white warning boards for oversized loads, with LED lighting, spiral cable and plug connection. Positioned at the front and rear vehicle section

Braking / Air suspension system
Dcodpfx Adsxcdmqohen
* 32110.057 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connector ISO 7638 (without connecting lines), parking brake as spring-loaded brake, external pneumatic connections and external EBS diagnostic port via ISO 7638 connector
* EBS system (manufacturer of choice from Kögel)
* Air suspension system incl. 1 lifting and lowering valve, installed on the left behind the axle assembly in direction of travel. Ride height is set automatically
* 2 non-interchangeable coupling heads at the front, ISO 1728
* Steel air tanks for brake system and air reserve (EN 286-2)

Floor
* Plate floor approx. 30 mm thick
* Floor circumferentially sealed
* Stake pockets for square tube insertable stanchions approx. 80 x 80 mm, positioned according to drawing J9: 8 rows of stake pockets (18 pockets per row: 4 outside + 10 in the center per row)

Front wall
* Storage for max. 14 insertable square tube stanchions approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall
* Front wall approx. 2,000 mm high with volumetric corner posts made of steel, with profiled steel sheet, bolted/riveted to the frame. 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front wall as per EN 12640

Side wall
* VarioFix steel punched exterior frame
* 24 pairs of lashing rings on the outer frame (to EN 12640), permissible pull force approx. 5,000 kg per ring

Impact protection
* 1 pair of steel buffer blocks, approx. 160x85x85 mm, mounted on the outside of the rear end plate
* Crosswise zinc-plated steel angle as forklift protection, including latch protection in the center, mounted on the rear end plate

Electrics / Electronics
* Lighting bracket made of steel, positioned above the

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.