Stranski nakladalnik

Jumbo JDQ 60/14/70TV - TRIPLEX

Stanje: rabljeno, Leto izdelave: 2021, premer žaginega lista: 800 mm, vrtljajska hitrost (min.): 1.450 obr/min, moč: 5,5 kW (7,48 KM), Cut-off Saw AS Very good, well-maintained condition Saw blade diameter: 800 mm Sturdy steel tube base frame High-performance saw motors Pneumatic material clamps (3 units, vertical) Two-hand safety controls Coolant system Protective cover Gsdjd Szf Njpfx Agyjbi Optional with length measuring system or automatic positioning system Available as a saw-drilling automatic machine or saw-punching automatic machine on request.

Stanje: novo, Jeklena konstrukcija dimenzij 7 m x 32 m (možnost podaljšanja), višina stebrov: 4,176 m (višji) in 3,338 m (nižji). V drugih oglasih nudimo konstrukcije z višjimi stebri: 5 m (višji) in 4,17 m (nižji), ter v različnih dolžinah, v izvedbah z nosilci za stenske letve ali brez nosilcev. Gedpfsychpwjx Agyjbi

Stanje: novo, Leto izdelave: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60° - 90° - 30° Swivel adjustment with hand crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Gbsdpeizkhvjfx Agyoi Extraction port: 100 mm Roller conveyor length: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Stanje: rabljeno, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – Semi-automatic under-table crosscut saw Maximum cutting range: 220x125 / 260x100 / 285x80 / 310x50 mm When cutting stacked boards, max. height: 100 mm. The framework is fully constructed from thick-walled, reinforced steel with complete surface coating. Sturdy floor mounting system with flanged steel feet for fixing hole. Two-handed safety cut control positioned ergonomically. Gbedpfjv Uq Tlsx Agyoi Saw motor power: 5.5 kW. Adjustable cutting speed via pneumatic controller. Maximum weight balancing system for durability. Shock-absorption system. Independent pneumatic adjustments for adaptation to various processing tasks. Durable and easily replaceable saw blade setting bar. Carbide-tipped circular saw blade, diameter 500 mm, Z=108. Pneumatic top workpiece hold-down with electro-pneumatic control. Movement system utilizes innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. CE models must be equipped as standard with at least 1 meter long infeed and outfeed roller tables. Technical Data: ----- Max. crosscutting dimension: 220x125, 260x100, 285x80, 310x50 mm Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: Carbide (HM) Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Dust extraction port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400V / 50 Hz, 3-phase Working table height: 900 mm +/- 20 mm Color finish: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right side of saw), non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, roller diameter 60 mm, spacing 250 mm, width 320 mm. Area between rollers enclosed with painted steel. Includes lateral guide. 2 m roller conveyor (left side of saw), non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, roller diameter 60 mm, spacing 250 mm, width 320 mm. Area between rollers enclosed with painted steel. Includes lateral guide, stop guide and millimeter scale. 2 heavy-duty pneumatic stops, width 200 mm each ----- Total price ex works: on request! ----- Images and video not original, show identical model. Other options such as extended infeed/outfeed tables or stop systems available on request! (Technical data as per manufacturer, subject to change without notice!)

Stanje: novo, Step-by-step coating systems Elboy Industrial Solutions designs and manufactures a wide range of paint shops tailored to your product requirements. With ELBOY, you can use virtual reality during the design phase to navigate your facility, allowing you to make necessary adjustments right from the start, avoiding unexpected results later on. Gbsdpfx Agedy Dw Asyei We offer engineering and manufacturing services for various applications, with special focus on environmental protection and occupational safety across all processes, including sandblasting, filling, washing, priming, and topcoating for all product sizes. The 'Step by Step' systems are equipped with overhead conveyors or floor conveyors, and can be configured for any product size. Cabins for sandblasting, chemical washing, pre-coating, drying, filling, top coating, and curing can be seamlessly integrated into the system. To execute each process step-by-step as specified by the system, automatic doors open once the programmed cycle is complete, and the product proceeds automatically to the next process line. These fully automated systems are operated via a 15-inch touchscreen and offer comprehensive reporting options—including main computer monitoring, product reporting, results feedback as required, and remote control capabilities. Our paint shops are designed and built by our engineers to meet your capacity, application, and specific operational requirements. Whether you require electrostatic powder coating, wet painting, sandblasting, coating, washing, or similar systems, our solutions deliver maximum efficiency with minimal personnel requirements and the smallest possible footprint.

Stanje: rabljeno, Delovna širina 230 mm Višina rezkanja 160 mm Krmiljenje Memory Plus Ponujamo sklop strojev za kompaktno rezkalnico, ki obsega: - Štiri-stranski rezkalni stroj Weinig tip Powermat 700, l. 2022 - Briketirna stiskalnica Spänex tip SHB 250, l. 2019 - Vzdolžna krožna žaga Jrion tip HFS-170/15-SA - Stroj za zavijanje snopov StraPack tip RQ-8S - Tračna razrezna žaga Hema tip UH 800 TR - Odsesovalna naprava Spänex filter stolp in Höcker Polytechnik ventilator Linija je še vedno v uporabi in jo je kadarkoli mogoče videti pod tokom. Na voljo po dogovoru od marca 2026. Dodatne informacije na zahtevo. Gbjdpsxmh U Hjfx Agyei Posamična prodaja možna po dogovoru.

Stanje: novo, Leto izdelave: 2025, The Multiblade or Single-shaft Multiblade Circular Saw SQUALO 515 in the LM version features an advanced system of movable blades. The machine is equipped with powered feed rollers on the worktable and powered top pressure rollers, ensuring effective all-wheel drive traction for precise and continuous transport of wood materials. Gsdpfx Agehpbxijyjbi In the LM (Movable Blades) configuration, the cutting unit consists of one fixed blade and a variable number of one to three movable blades. These can be dynamically positioned to accommodate various edging and multiple cutting requirements. A distinguishing feature of this model is its expandable cutting capacity: by utilizing special arbors, the number of blades used simultaneously can be increased to up to six. It is important to note that blades mounted on these special arbors operate at a predetermined fixed distance, enabling the efficient production of components with standardized widths. This versatility allows the machine to easily switch from tasks requiring flexible blade positioning to series production with fixed cutting intervals.

Stanje: rabljeno, Precizna kap in kotna žaga / Precizna Kapp- in Gehrungssäge OMGA T55 300 Leto izdelave / Leto cca. 2009 z odsesavanjem Premer žaginega lista 300 mm Širina reza max. pri 90° 135 mm Širina reza max. pri 45° 90 mm Višina reza max. 98 mm Fiksne točke pri 45°–30°–22°30'–15°–10° desno in levo Zelo dobro ohranjeno stanje Nastavljiva precizna kap in kotna žaga z vrtljivo mizo, samozaklepanjem na glavnih kotih 45°, 30°, 22°30’, 15°, 10° in 0° desno in levo, ročnim zaklepanjem vmesnih kotov, prikazom kota na stopinjski lestvici. Online video pregled preko WhatsAppa – MS Zoom – Telegram Gbedpfx Aoxvh E Rsgyoi Na zalogi v Emskirchen/Nürnberg – Na voljo takoj – Možnost testiranja

Stanje: rabljeno, Leto izdelave: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right sawing unit is fixed; the left unit can be adjusted to the required cutting length, which can be read off a digital display. Both units feature supports enabling simultaneous cutting of two glazing beads. For processing larger cross-sections, the upper support can be removed. Upon completion of the cutting cycle, the pneumatic clamping cylinders automatically swing to the side, simplifying loading and unloading. STANDARD EQUIPMENT: • Fixed right-hand unit • Digital measuring display • Pressure monitor • 2 carbide-tipped saw blades Gsdpexnlgcofx Agyjbi • Electrical system with motor brake, undervoltage release, and motor protection switch • Pressure monitor • Tool kit • Safety guards with horizontal, pivotable clamping devices • Two-hand operation • Belt drive • Pneumatically raised sawing unit • Central support TECHNICAL SPECIFICATIONS: • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Footprint (standard configuration): 3000 x 850 mm Extended cutting capacity: 1 pc Maximum cutting length: 4000 mm Star stop with 4 positions: 1 set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 pc Adaptations for rebated profiles: 1 pc Adaptations for rebated profiles as per drawing: - Attachment on the clamping devices to compensate for profile inclination - Spacers on the rear stops of the units and the central support In the sketch below (shown in green), an angled presser is depicted, following the inclined profile and pressing it against the (shown in red) spacer on the stop. Location: Garbsen

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm Gbodowvqklepfx Agyji • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.