Center za vrtanje in rezkanje

JUARISTI TS-3 - MG 12

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.100 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.000 mm, največja hitrost vretena: 3.000 obr/min, dolžina mize: 1.800 mm, širina mize: 2.000 mm, dolžina pomika os W: 700 mm, teža obdelovanca (maks.): 12.000 kg, dolžina vretena za rezkanje: 700 mm, FPT CASTEL RED Heidenhain TNC 430, Baujahr 2007. Verfahrwege: Nsdpfx Aaowdiu Ejzedd X-Achse: 3.100 mm Y-Achse: 2.000 mm Z-Achse: 1.000 mm Tischgröße: 2.000 x 1.800 mm, Tragfähigkeit: 12 Tonnen Kühlung durch die Spindel. Details: X-Achse (Ständerweg): 3.100 mm Y-Achse (Vertikalweg des Spindelkopfs): 2.000 mm Z-Achse (Spindelhub): 700 mm W-Achse (Ständerweg in Spindelrichtung): 1.000 mm Spindeldurchmesser: 130 mm Werkzeugaufnahme: ISO 50 Spindeldrehzahl max.: 3.000 min⁻¹ Spindelmotorleistung: 37 kW Rundtischgröße: 1.800 x 2.000 mm Tischbelastung: 12 t C-Achse: 360.000°

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, poteza s peresom: 190 mm, hitrost vretena (min.): 41 obr/min, največja hitrost vretena: 1.800 obr/min, skupna masa: 1.920 kg, teža obdelovanca (maks.): 17 kg, najv. debelina jeklene pločevine: 32 mm, vrtilni moment: 250 Nm, višina mize: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - Fully overhauled by vaumatec in 2022 - Equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 support feet to relieve the table frame) Technical data: Drilling capacity (solid material): St 60/E335, Ø 32 mm (with feed rate 0.20 mm/rev): GG 22, Ø 45 mm Tapping capacity: St 60/E355, M26 Tapping capacity: GG22, M35 Tool holder: MT4 Column diameter: Ø 195 mm Spindle nose to table distance (min./max.): 260/660 mm Table height: 900 mm Quill stroke: 190 mm Column travel: 400 mm Spindle speeds, Range I: 41-1800 rpm Feeds: 0.1-0.15-0.20-0.3 mm/rev Spindle torque: max. 250 Nm Arm travel resistance (radial): 25 N Arm travel resistance (axial): 25 N Nsdjrn Riqepfx Aazedd Clamping force (radial): 3500 Nm Clamping force (axial): 5500 N Feed force: 7500 N Max. permissible mass: 17 kg Max. permissible moment of inertia: 0.002176 kgm Workpiece: Max. table load: 1000 kg Center of gravity: centered on the working surface

Stanje: rabljeno, Tool holder interface type: HSK-A 100 Nedog Nqlijpfx Aazsdd Tool holder type: Wohlhaupter Tool holder type: Fine boring tools / Facing heads / Precision turning Large selection of Wohlhaupter HSK-A 100 tool holders, boring heads, adapters, and extensions available for sale. A parts list with prices will be provided upon request.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 10.000 mm, pomik osi Y: 3.000 mm, pomik po osi Z: 1.500 mm, hitro pomikanje X-os: 25.000 m/min, hitri pomik os Y: 25.000 m/min, hitri pomik na osi Z: 25.000 m/min, največja hitrost vretena: 4.000 obr/min, RepairFIT+ by Dornhöfer The Difference. Including installation & commissioning! TECHNICAL MAIN DATA Year of manufacture: 2015 Travel / Stroke capacities: Longitudinal (X): 10,000 mm Vertical (Y): 3,000 mm Transverse (Z): 1,500 mm Paintwork: graphite grey RAL 7024 / agate grey RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Taper: DIN 69871 Main drive: Motor / Brand: Siemens main spindle drive Type: 1PH7 Max. drive power: From 198 rpm, 100% duty cycle, 41 kW Max. torque: Constant up to 198 rpm, 100% duty cycle, 1,920 Nm Speed control / Gearbox: 3-stage (oil-cooled), with automatic shifting Spindle speeds up to 4,000 rpm: - Low range: 0–516 rpm - Medium range: 460–1,288 rpm - High range: 1,200–4,000 rpm Axis drives / Feed rates: Axis drive motors: Rapid traverse max. (X/Y/Z axis): 25,000 mm/min Feed rate max. (X/Y/Z axis): 15,000 mm/min Max. feed force: - X axis: 35,000 N - Y/Z axis: 32,000 N Axis drive systems: - X axis (longitudinal): Rack and pinion (manufacturer Atlanta) - Y axis (vertical): Preloaded ball screw Ø 63 x 20 - Z axis (transverse): Preloaded ball screw Ø 50 x 20 Weight (without clamping table/plate field): approx. 49,500 kg Njdpev R Hwrsfx Aazjdd Power supply connection: approx. 60 kVA Handheld control Innotrol HBG Automatic tool changer with 60 magazine positions BIG Plus tool spindle Operator platform height-adjustable to 1,800 mm, transversely adjustable to 800 mm Interface for adapter milling heads What does RepairFIT+ mean? With RepairFIT+ we offer you a profitable and safe entry into our product lines. Our machines undergo a strict selection process, are subject to a comprehensive deep-dive check, and are thoroughly cleaned by our specialists. All detected defects, whether technical or cosmetic, are professionally repaired, ensuring that the machine is delivered in perfect condition.

Stanje: novo, Leto izdelave: 2024, Welding Positioner Protec KT 10 000 HV Complete set including hand and dual foot remote control Digital speed display Hydraulic height adjustment Tilting range from 0 to 130° Dimensions: Minimum tilted height: 1080 mm Maximum tilted height: 2200 mm Minimum horizontal height: 1400 mm Clamping plate diameter: 2000 mm Njdpfxok S D N Es Aazjdd Length: 3250 mm Width: 1780 mm Speed range: 0.05 to approx. 0.6 rpm.

Stanje: rabljeno, Swing diameter: 3,200 mm Modified swing diameter: 2,400 mm Swing diameter over support: 3,000 mm Max. turning length: 15,000 mm Control system: Sinumerik 840D Siemens Max. workpiece weight: 80,000 kg Working accuracy (up to): 0.01 mm Main spindle speed range max.: 50 rpm Approx. machine weight: 154.4 t Nodpjwtrz Hjfx Aazodd Required floor space: approx. 20.7 x 6.0 m Heavy-duty lathe ZERBST - DXP 5 / W15x15000 - Measuring accuracy: < 0.01 mm Retrofit 2009 / 2012: - 2009: Conversion of control system to Sinumerik 840D - 2012: New main gearbox including main spindle drive Addition of holding brake, including electrical integration Modification and optimization of cylindrical roller bearing arrangement Modernization of control and safety technology

Stanje: rabljeno, Leto izdelave: 2004, Technical data: Travel (X/Y/Z): 650 / 500 / 450 mm Clamping area: 1000 x 600 mm Spindle taper: SK 40 Spindle speed: 6,500 rpm Maximum table load: 400 kg Number of tool magazine slots: 20 Power consumption: 24 kVA Machine weight, approx.: 5,500 kg Equipment: - Motor spindle 12,000 rpm - 20-position tool changer - Heidenhain tool probe Ndsdpfx Aewglapoazod - Heidenhain workpiece probe - Heidenhain electronic handwheel - Menzel minimum quantity lubrication system - Approx. 25 tool holders

Stanje: dober (rabljeno), Leto izdelave: 2004, skupna masa: 40.000 kg, stiskalna sila: 450 t, AXIAL 4100x450tn + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA CNC crowning table + WILA hydraulic punch and die clamping Bending length: 4,100 mm Press force: 450 tonnes Stroke: 365 mm Axes: 5 axes (Y1, Y2, X, R, Z) *Z axis (stops with double prismatic guide) WILA hydraulic punch and die clamping WILA CNC crowning table Press brake speeds: Approach speed: 110 mm/sec Working speed: 8 mm/sec Return speed: 90 mm/sec Distance between uprights: 3,600 mm Throat depth: 410 mm Open height (between table and ram): 500 mm Pit depth: 975 mm Njdpou Au U Tjfx Aazedd CNC: Cybelec ModEva 10 (Control CPU replaced in September 2023) Safety Laser: DSP LASER - TX Weight: 40 tonnes Motor power: 30 kW

Leto izdelave: 1974, Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1293, CNC radialna kovaška stiskalnica GFM mod. SX-16 Proizvajalec: GFM (Avstrija) Leto izdelave: 1974 / 2022 Model: SXL-16 Serijska številka: 1293 Krmiljenje (PLC): Siemens S7 - Technology V4.2 s CNC Bosch Rexroth XM Število kladiv: 4 Kovalna sila: 800 t (200 t na kladivo) Število udarcev na minuto: 580 Dolžina kladiva: 320 mm Maksimalen razpon nastavitve kladiv - izračunano po premeru: 100 mm Maksimalen premer kovanega izdelka za: - ogljikovo konstrukcijsko jeklo: krožni presek – Ø 160 mm kvadratni presek – 130 mm - visokolegirano jeklo: krožni presek – Ø 120 mm kvadratni presek – 100 mm Ekstremen štirikotnik: 12 x 120 mm Maksimalna dolžina kovanega izdelka: 6000 mm Minimalni in maksimalni premer vpenjanja v manipulator: 30 - 160 mm Hod manipulatorja A: 6800 mm Hod manipulatorja B: 7200 mm Prehod skozi manipulator: Ø 130 mm Hitrost manipulatorjev v primeru hitrega pomika: 400 mm/s Delovna hitrost pomika manipulatorjev (brezstopenjsko nastavljivo): 10 ÷ 115 mm/s Tlak hladilne vode: 3 ÷ 5 bar Temperatura dovodne vode: maks. 30 °C Poraba hladilne vode: 34 m³/h Premer cevi za hladilno vodo: 2” Tlak stisnjenega zraka: min. 5 bar Premer cevi za stisnjen zrak: Ø20 mm Poraba stisnjenega zraka: 1,5 Nm³/h Napajanje (nazivna moč): 350 kW Napetost motorja: 500 V Napetost krmiljenja: 220 V Moč glavnega motorja: 200 kW Moč motorjev črpalk: 185 kW Moč motorjev za manipulatorje: 2 x 22 kW Ndedpsq U Sa Sjfx Aazed Dimenzije stroja Višina osi kovanja nad tlemi hale: 750 mm Maksimalna višina stroja nad tlemi hale: 2050 mm Maksimalna dolžina stroja na tleh hale: 33.740 mm Dolžina temelja: 34.200 mm Maksimalna širina stroja na tleh hale brez nakladalne opreme: 4350 mm Širina temelja: 15.600 mm Neto masa stroja: 124.490 kg

Leto izdelave: 1984, Stanje: pripravljen za uporabo (rabljen), Rafamet UBB 112/2 Minimalni premer tekalne površine kolesa: 700 mm Maksimalni premer tekalne površine kolesa: 1120 mm Dolžina vpenjanja: 540 – 1050 mm Minimalna dolžina osi kolesnega para: 1640 mm Maksimalna dolžina osi kolesnega para: 2800 mm Ndedpfx Aaohvml Iszed Maksimalna širina pnevmatike: 150 mm Maksimalna teža kolesnega para: 4000 kg Hitrost pomika sani nastavitve: 2000 mm/min Maksimalni pomik sani: 2000 mm/min Moč glavnega pogonskega motorja: 80 kW Teža cca: 40000 kg