Sistem za odstranjevanje embalaže

Joulin

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, obratovalne ure: 4 h, številka stroja/vozila: 15582, VOLVO Wheel Loader L60H with High-Tip Bucket (Quick Coupler) • Tires: 600/65R25 Michelin XLD (L3) • Rims for 20.5-25 and 600/65-25, three-piece • Full-coverage fenders for wide 65-series tires • Mud flaps for wide 65-series tires • Mesh filter at the filling port • Hand throttle • Automatic engine shutdown • Delayed machine shutdown • Engine D6J, Emission Stage V (EU) • Reversible fan • Speed limiter, 40km/h • Towing pin • Premium comfort seat / 3-point seatbelt (air-suspended, heated, horizontally sprung) Bljdpfxsvmp Hnj Afqsr • Air conditioning incl. automatic climate control ACC • DAB+ radio incl. USB & AUX input / Bluetooth • DAB+ radio prep. on right, incl. speaker • Steering knob • Sliding window in driver's door • Sunblind, side window • Rearview camera incl. LCD monitor (color) • Emergency steering • S-cabin air filter • CDC comfort drive & steering control • Operating permit fixed in cab (wire rope) • Electrically adjustable, heated rearview mirrors • Noise reduction kit, EU excl. decals • License plate holder incl. lighting • Driving/main LED headlights, asymmetric right • LED power package • LED beacon • Acoustic reversing warning (broadband tone) • 4th hydraulic circuit (std. lift frame) with multi-lever control • Separate implement locking for quick coupler • Central lubrication system (Volvo) • Wheel nut socket set • Tool kit • Access step, right side • BSS lift frame damping • Additional 500kg counterweight for timber and industrial applications • Trailer hitch • Reinforced taillight guards • Tooth guard for bucket • Protective plates rear frame, right and left • Noise marking • CE marking • Germany-specification kit • Caretrack GSM (hardware) • Caretrack GSM basic version (according to current VCE conditions) • Hydraulic quick coupler • VOLVO high-tip bucket – quick coupler, width: 3,000mm, capacity: 7m3

Leto izdelave: 2011, Stanje: skoraj kot novo (rabljeno), For sale is 1 roller conveyor, each including a geared motor: Technical Data: Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: Up to 4 tons Geared motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (further specifications see nameplate in the image) Bledpfx Afeihpn Njqor Three of the four roller tracks have a wooden sidewall along the entire length, and one roller track has a side wooden wall with a length of 5.20 m. Two of the four roller tracks are equipped with 3 lateral removal systems each. (see pictures)

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Neu Friulmac EQ 004 2.5 mit Zuführband und Aufgabetrichter Touchscreen-Bedienung und automatische Einstellung Arbeitslänge – min. 190 mm, max. 2500 mm Arbeitsbreite – min. 30 mm, max. 250 mm Arbeitshöhe/Dicke – min. 12 mm, max. 35 mm Vorschubgeschwindigkeit – 6–25 m/min Bledpevupm Dsfx Afqer 2 x 2 Vorschubaggregat – 3 kW – 720 U/min Hauptprofilkopf – 4 kW – 7200 U/min Für weitere Informationen kann ich Ihnen die Originaldokumentation zusenden.

Stanje: zelo dobro (rabljeno), Debarking line Cambio, max. debarking diameter 450 mm, transverse infeed conveyor length 12.5 m. Blsdswvhkvopfx Afqjr

Stanje: pripravljen za uporabo (rabljen), De-stacking by layers for layer singulation Stack slat separator with conveyor belt Bledpouzht Tefx Afqjr Layer transport to layer buffer Layer buffer with singulation before the feeding unit Layer patterns for the two separated timbers including transfer conveyors, for example to the stacking machine

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 9.000 h, Funkcionalnost: nepreverjeno, CHP unit in insulated container Plant control cabinet CHP control cabinet Gas flare Agitator Bedpfstrfhrjx Afqjlr Emergency cooler Various pipelines and small parts The plant was only in operation for 1 year Condition as shown in the photos

Stanje: generalkompletno obnovljen (rabljeno), Sušilna linija za sortiranje plošč - Linija za sortiranje suhih plošč - 20 žepov – transportni trak - Avtomatsko zbiranje distančnikov - Obrezovalka Almab s 16 žaginimi listi - Avtomatizacija – TG automation, Švedska (Sorting) - Sistem Dynalyse MC Pro 2400 - Oznaka/tiskalnik – Alpha Dot Merlyn 350 - Bobnasti sekalnik Erjo 204 MA - Zlagalnik Almab z 9 kasetami - Paketna stiskalnica Bjdpfxevzqcye Afqslr

Stanje: rabljeno, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal Treatment Plant / Thermal Chamber for Wood Modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on wood thickness and type. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler using thermal oil as the heat transfer medium. Technical Data: Capacity: 5,950 - 9,900 m³ of wood per year (based on 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions (LxWxH): 10,500 x 1,300 x 1,100 mm Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel Duplex EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, covered with 1 mm galvanized steel sheet Main Components: 1. Autoclave for heat treatment 2. Vacuum system for extracting air from the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 each side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Blsdpfx Afsv Si Szsqjr Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Safety chimney made of stainless steel (300 mm diameter, 6,000 mm length) Function Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, without transport or installation Disassembly, loading, and transport by us are possible as an option Errors in description and pricing reserved To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place as is Technical data, description of condition, year of manufacture and scope of supply according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 1.000 h, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 160 mm, vrsta nastavitve višine: hidravlični, Technical Description – PAUL KME-750-L Double Edger (Year of Manufacture: 2012) The machine offered is a double edger of the type PAUL KME-750-L, manufactured in 2012. The machine is in good condition and ready for immediate use. It is ideally suited for precise edging of timber in industrial applications. Technical Specifications: • Machine No.: 12242770 • Year of manufacture: 2012 • Net weight: approx. 1,500 kg Drive & Electrical: • Connected load: 38 kW • Supply voltage: 400 V / 50 Hz • Rated current: 71 A • Fusing: 80 A • Control voltage: 24 V DC Saw Technology: • Saw blade speed (min/max): 250 / 380 rpm • Bore diameter: 75 mm • Saw motor speed: 3,200 rpm Bljdpfxoxpua Us Afqjr Hydraulics & Pneumatics: • Hydraulic pressure: 60 bar • Pneumatic pressure: 6 bar Equipment: • Feed rollers for easy material infeed • Integrated straightness sensors for automatic alignment • Lath bushing • Chip chutes • Outfeed table for organized material removal This high-quality machine from PAUL is designed for continuous use in industrial timber processing and is equipped with practical additional features to enable an efficient workflow.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Good day, We are offering our very well-maintained cross-cut saw from MS Maschinenbau. Technical specifications: - Cutting lengths between 600 mm and 3000 mm - Workpiece thickness: min. 3 mm, max. 100 mm - Feed rate: 5–30 m/min, stepless adjustment Bledpfetykw Sex Afqsr - Roller conveyor included - Condition: as new The machine can be inspected and tested if you are interested. If you have any questions, please feel free to contact us.