Dolga tračna brusilka

Johannsen T 94

Stanje: dober (rabljeno), Leto izdelave: 1997, Ponujamo ta dobro ohranjen dolgopasovni brusilnik Johannsen T94, letnik 1997. Proizvajalec: Johannsen Langbandschleifer Model: T94 Letnik: 1997 Iajdoygvqqspfx Adksp Za dodatna vprašanja ali več informacij nam pošljite sporočilo ali nas pokličite.

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Isdpfjrigxyjx Adksap Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Stanje: rabljeno, Leto izdelave: 1993, with sanding shoe extraction used, top equipment, excellent condition, low hours Manufacturer: Johannsen Model: T 94 Year of manufacture: 1993 Machine no.: 20375 GS-certified for wood dust Motor: 4.0 kW Sanding length: approx. 2600 mm Sanding width: approx. 850 mm Belt dimensions: approx. 150 mm x 7800 mm Table size: approx. 2780 mm x 800 mm Throat depth (right): approx. 550 mm Electrically adjustable Upper belt cover Table illumination Belt speeds: 27 m/sec. Right/left run Extraction connection: D 80/140 mm left / 120 mm right Space requirement: approx. 4050 mm x 2200 mm Weight: approx. 750 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, without warranty or guarantee Iajdjvwfncepfx Adkep

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, moč: 5,65 kW (7,68 KM), dolžina mize: 2.780 mm, širina mize: 1.000 mm, Tračni brus Johannsen z električnim nastavljanjem višine, velikost mize 2780 x 1000 mm Isdex Rbvhopfx Adkjap

Stanje: novo, Leto izdelave: 2022, New machine Year of manufacture: 2022 Basic equipment: - Electromotive height and tilt adjustment, 0–46°, with automatic correction of cutting height during tilting - Controls at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manually adjustable via scale, including manual fine adjustment, cutting width 1,000 mm Iaodpew I Uxcjfx Adksp - Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm - Saw blade projection: max. 150 mm - Max. saw blade diameter: 450 mm - Motor power: 4 kW (5.5 HP) at 4,000 rpm - AKE tool clamping system for main saw blade - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Infinitely variable speed control from 2,000 to 6,000 rpm - Exact speed adjustment to the material increases cut quality and blade service life Extended cutting height for single-side tilting This option is for single-side tilting and comes with a large extraction hood for a max. saw blade diameter of 550 mm and a saw blade projection of max. 204 mm. In combination with a scoring unit, the max. saw blade diameter is 500 mm, respectively 179 mm cutting height. Only available with at least 5.5 kW (7.5 HP) motor power. 2-axis scoring unit for single-side tilting With electromotive height and lateral adjustment, programmable scoring blade height with quick lowering and raising, drive motor 0.75 kW (1 HP), 8,200 rpm. Retrofitting only possible on machines prepared for scoring unit installation. LED lighting Highly energy-efficient LED technology makes the hazardous area of the scorer clearly visible. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be infinitely locked in any position. The large double rollers, precision-manufactured from hardened steel, ensure perfect guidance of the top carriage to the bottom carriage via hard-chromed guide rods. This running quality is maintained even under decades of operation and exposure to dust. The carriage is built as an extremely torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, integrated flush with the top carriage, serves as a support for the cross-slide and as an interface for various accessories. The complete unit is low-maintenance and does not require lubrication. On/off switch on the double roller carriage The on/off switch is always within easy reach on the double roller carriage. With four buttons, both the main saw blade and the scorer can be switched on and off, saving steps and increasing safety. Angle mitre fence, cross cuts up to 3,500 mm This ALTENDORF-patented fence with integrated length compensation makes precise angle and mitre cuts in one operation much easier. In both positions, the swivelling angle is infinitely adjustable up to 49° and displayed via scale. The play-free and robust stop flaps can be easily shifted and set as individual flaps across the entire range up to max. 3,500 mm.

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), A compressor system from the plant manufacturer Rico, consisting of two Atlas Copco compressors, two refrigeration dryers, and a Beko oil-water separator, also by Atlas Copco, is available. 1) Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air delivery: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. 2) Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. 3) 2x refrigerated compressed air dryers Atlas Copco FX 15, air flow: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant amount: 2050g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900mm/750mm/1000mm, weight: approx. 160kg. 4) Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control scope: 2-6 compressors. 5) Oil-water separator Beko ÖWAMAT 15, throughput capacity: 6m³-30m³/min, oil outlet: DN40, tank volume: 115.5l, operating volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100mm/550mm/800mm, weight: approx. 40kg. Total system hours: 8,656h, controller hours: 42,334h. Documentation available. On-site inspection possible. Isdpfxsxdc Uvj Adkeap

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, TERSA nožni valj s 4 noži, motor 5,5 kW, 400 V, 50 Hz, elektronska naprava za zagon in zaviranje. Nastavljanje debelinske mize s tipkami za hitro ali počasno nastavitev, natančnost do 0,1 mm, vgrajen števec delovnih ur, debelinska miza na 4 nosilnih vretenih s štirikratnim vodenjem. Dve podajalni hitrosti: 7 + 14 m/min. Ena gumijasta vhodna in ena gumijasta izhodna valjčka. Dva odsesovalna priključka Ø 160 mm, drsnik za zgornje odsesavanje. Zaščitna naprava za skobljanje SUVAMATIC. Moč motorja 7,5 kW. Krmiljenje pozicioniranja z nadzorom senzorjev vključeno. Ijdpfx Asx Ey Tzsdksap

Stanje: novo, Leto izdelave: 2022, Dowel hole boring unit: no Drilling depth: 150 mm Iodjgq Un Aspfx Adkoap Slot length: 180 mm Height adjustment travel: 145 mm Motor power: 1.5 kW Speed: 3000 rpm Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 240 kg

Stanje: rabljeno, Zasukljiv agregat, širina verige 10 mm Lokacija skladišča: Nattheim Iedpjvvku Esfx Adkoap

Stanje: delavnici obnovljeno (rabljeno), Grinding table dimensions: 2500 x 800 mm Abrasive belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Table height adjustment: mechanical Right and left rotation 2 abrasive belt speeds Abrasive belt cover on top CE compliant Iedov D H Siopfx Adkoap Includes special grinding shoe Note on used machines: • Technical specifications may contain errors; subject to prior sale. • The indicated prices are ex-works – free loading. • The machines have been cleaned and functionally tested. • All machines are sold as inspected, without any warranty or guarantee. The buyer is welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and telephone number!)