Površinska plošča

JOHANN FISCHER 3000x4000mm

Stanje: rabljeno, Waste Rollers / Roll Compactor Welger RV 641 Serial No. 1902.01.607 Dimensions: L 1490mm x W 900mm x H 1750mm, Weight 540 kg Bale diameter up to 400mm Bale length 600mm Bale weight up to 30kg Bale Density 250 x 400kg/33 Throughput up to 300 kg/h Feed-in speed 0.36 m/s Binding material: stretch film, 23 µm Roll diameter 250mm Caster and fixed wheels for in-house transport without auxiliary equipment Bjdpfx Aiov Rpmceqeln Adjustable operating time via time relay Bale and operating hours counter Continuous fill-level indicator and acoustic full signal Electronically operated bale ejection door Fast binding and ejection of bales (approx. 15 seconds per bale) High throughput of up to 12 bales per hour with bale weights up to 30 kg. Online video inspection possible via WhatsApp, MS Zoom, or Telegram In stock at Emskirchen/Nuremberg – available immediately – test run possible.

Stanje: dober (rabljeno), Filtration system, manuf. Seitz Orion, 100 x 100, for 180 hl/h, factory-refurbished in 2002, consisting of: - Kieselguhr frame filter with 29 stainless steel KG frames, external rising pipes, sight glass fittings with pressure gauge, stainless steel kieselguhr discharge trough with screw conveyor, KG dosing unit - Sheet filter with 150 stainless steel plates, external rising pipes, sight glass fittings with pressure gauge - Operator platform between both filters, step at the KG filter - Control cabinet Blodpferai N Aox Aiqon

Stanje: novo, Leto izdelave: 2024, nosilnost: 6.000 kg, Oprema: nožno daljinsko upravljanje, Welding positioner, vessel rotator with 6000 kg load capacity with hand and foot remote control Suitable for diameters from 160 mm to 4000 mm Drive roller diameter: 300 mm Dimensions: Length 1900 mm x Width 470 mm x Height 390 mm Stepless speed adjustment: 50 – 2000 mm/min Bjdpfegfql Ajx Aiqoln Motor: AC 380 V

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Parts cleaning system / spray cleaning system type CM13 2-tank (washing + rinsing) including air knife blow-off Basket diameter: 1,300 mm (octagonal) Maximum load weight: up to 1,000 kg Blsdpfxsv Tm Ays Aiqjn Loading and unloading of the basket is performed by the operator using a supply trolley parked/positioned in front of the system (decouplable / mobile). Usable height: 800 mm Washing tank: volume: 430 liters, spray pressure: 6.0 bar Rinsing tank: volume: 280 liters, spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following equipment: + automatic water top-up for both tanks + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be switched as required) for small components (= E-Spray System) + side channel blower with height-adjustable airknife system (blow-off drying) + steam/fume extraction incl. condensate return + weekly timer for electric heating + prepared for optional oil separator retrofit + medium filtration via bag filter (manufacturer: Eaton, Topline) in both circuits (washing and rinsing) + outer cladding with stainless steel sheet + entire system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return circuit + stainless steel circulation pumps incl. mechanical seal and soft starter The system is displayed at the Glogar Technology Center and is used exclusively for washing trials.

Leto izdelave: 1979, stanje: dober (rabljeno), Back Relief Grinding Machine May WH50 Specifications: Manufacturer: Rhode & Dörrender (May) Model: WH 50 Year of manufacture: 1979 Min. grinding diameter: 3 mm Max. grinding diameter: 50 mm Weight: 1,350 kg Footprint: 1520 x 1600 mm Bsdpshadxcefx Aiqjln Application range: For grinding and back relief of 2 to 4-fluted round tools Suitable for grinding profile/form tools Including Diaform dressing device

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Spray cleaning system – parts washer – NEW UNIT / Pilot plant system Bedpfx Aswitvqsiqeln Basket dimensions (octagonal): 1,287 mm Basket diagonal: 1,393 mm Usable height: 900 mm Maximum load weight: 600 kg Tank capacity: 500 liters, spray pressure: 5 bar, 400 l/min, heatable up to 90°C System constructed entirely from stainless steel 1.4301 (AISI 304), pickled throughout Incl. loading cart in front of the unit Included special equipment: - Steam extraction incl. condensate return - Automatic water refill and level monitoring - Removable coarse filters in return line to wash tank - Detachable basket surround - Prepared for retrofitting an oil separator - Weekly timer for heating - E-spray tube for improved component cleaning - Inspection hatch in tank area - Siemens S7 1200 controls with color touch panel by Weintek Commissioning by qualified specialists can be arranged at additional cost upon request.

Stanje: dober (rabljeno), Clamping plate with grooves, scribing and spotting plate, measuring plate, measuring table, straightening plate, marking plate - Clamping surface: 2995 x 2500 mm - Clamping plate: with grooves, no T-slots - Height: 300 mm - Groove width: 10 mm - Groove spacing: 200 mm - Transport dimensions: 3100/2500/H300 mm - Weight: 5000 kg Bjdpfx Aiendzycsqsln

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.650 mm, skupna širina: 1.770 mm, skupna višina: 1.580 mm, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, pritisk: 5 letvica, temperatura: 75 °C, moč: 15,4 kW (20,94 KM), največja dovoljena obremenitev: 350 kg, teža obdelovanca (maks.): 350 kg, premer kletke: 1.100 mm, TRL 1100 - 2021 - 8.500 € Industrijski pralni stroj za čiščenje in razmaščevanje obdelovancev s pomočjo alkalnega čistilnega sredstva. Stroj je v celoti izdelan iz nerjavnega jekla AISI 1.4301. Opremljen je z dvojnimi stenami in izolacijo med njimi. Vrtljiv koš za dele s šobami za nanos čistilnega sredstva na spodnji in zgornji strani. Vgrajen filter za grobe nečistoče. Opremljen s črpalko za čistilno sredstvo in črpalko za odvajanje, da se lahko porabljena čistilna tekočina odstrani. Nivojski stikala v rezervoarju za zaznavanje nivoja tekočine. Nadzor morebitnih puščanj. Nadzorna omarica z digitalnim prikazom temperature. Omarica je opremljena s signalno lučko za prikaz stanja. Stroj je v odličnem stanju in je takoj pripravljen za uporabo v vaši proizvodnji. Bljdpfx Aewfdpmoiqsn

Stanje: rabljeno, Radial drilling machine with platen table WEBO type HRH 100 / 3000 Machine no. 10009555/7 -- 1110185 -- 6046 Year of manufacture: 1979 Drilling capacity Ø 100 mm in ST 60 at feed 0.5 mm/rev Nominal arm reach 3000 mm Maximum arm reach max. 3100 mm Spindle taper MT 6 Spindle speed 22.4 - 1600 rpm, 36 steps Feed 0.05 - 2.5 mm/rev, 18 steps Distance spindle - base plate 970 - 2335 mm Bodpfxjfbt Hus Aiqjln Quill stroke 325 mm Boom swing range 360° Travel on bed, bed length 7500 mm Clamping surface of platen field 8000 x 2100 mm - Electric central clamping - Drilling unit movable longitudinally on the machine bed by electromotor - Platen field made of 2 clamping plates with 7x T-slots (length 4000 x width 2100 x plate thickness 360 mm) Required space (L x W x H) 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 t Transport dimensions platen field (L x W x H) 4000 x 2100 x 900 mm (2 plates stacked) Transport weight platen field approx. 14 t Good condition

Leto izdelave: 1997, stanje: dober (rabljeno), Macmon M 100 RE tool milling machine with 3-axis Heidenhain digital readout from the training department, rigid table, SK 40 spindle taper. Accessories: electric spindle guard, various collets and milling arbors. Good, ready-to-use condition, can be demonstrated under power by appointment. Bljdpfx Aiohgmmzeqsn