Horizontalna tračna žaga na osnovi umetne inteligence

JLH saws H-560MAX

Stanje: novo, Leto izdelave: 2025, CORMAK HBS320 for double-sided miter cutting in the range from -45° to +60°. The machine’s design is based on solutions and projects developed by Polish engineers. Its precision and quality place it at the forefront of band saws, capable of cutting materials up to 320 mm in width. A key advantage of the machine is the latest-generation hydraulic cylinder. The machine features a reinforced vice base and a quick-clamping vice. Machine Features The CORMAK HBS320 metal band saw enables cutting material at any angle between -45° and +60°. Workpieces can be fed manually or by any feeding device. The feed during cutting is gravity-based, utilizing oil flow in the hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. After the cutting cycle is completed, the machine automatically stops and the operator raises the arm to the starting position. The saw arm is made from a very robust, single-piece grey cast iron casting. Combined with a 27 mm wide saw blade, it is perfectly suited for serial cutting of structural, stainless, and tool steels. The vice is mounted on an adjustable bed and features quick-release clamping. The blade guides are equipped with ball bearings and carbide inserts, ensuring excellent precision and straightness of the cut. This has a significant impact on band guidance, blade longevity, and cutting quality. The carbide guides greatly reduce wear on both the machine and the blade. The base is a rigid body constructed from welded steel sheets. Inside, there is a separate coolant tank with an electric pump. The top of the base is designed as a tray to collect coolant and chips generated during material cutting. A cast iron worktable with a double-sided pivoting arm and control panel is mounted to the base. Feed rate is adjusted from the control panel. Two blade speeds are available: 44 and 88 m/min. When the saw arm is in the lower position (after the cut), the blade drive automatically switches off. Safety is ensured by blade guards and microswitches that stop the motor when the cutting cycle is complete or any guard is opened. An additional safety feature is automatic shut-off in the event of blade breakage. Technical Data Ø MAX - 260 mm (straight cut) H x W MAX - 320 x 160 mm (straight cut) POWER SUPPLY - 3 phase 400V TOTAL POWER - 1.5 kW Dedpfxei D Dgws Aflocb ARM DESCENT CONTROL - hydraulic cylinder BLADE LENGTH - 2740 x 27 x 0.9 mm BLADE SPEED - 44 / 88 m/min VICE BASE HEIGHT - 920 mm DIMENSIONS - 1400 x 880 x 1550 mm WEIGHT - 280 kg Cutting Parameters Angle 0º -----ø260 320 x 160 255 x 255 45º R ø210 210 x 200 210 x 210 60º R ø135 135 x 130 130 x 130 45º L ø160 220 x 130 160 x 160 Price stated is NET. The price does not include shipping costs. For more information, please contact us by phone or email. We invite you to view our full offer on our website.

Stanje: novo, Leto izdelave: 2025, dolžina tračnega lista: 3.920 mm, širina tračne žage: 34 mm, Double Column Fully Automatic Bandsaw Everising H-260 HB Cutting range round: 0 - 260 mm Cutting range square: 300 x 260 mm Bundle clamping width: 145 – 190 mm Bundle clamping height: 30 – 130 mm Drive power: 3.7 kW Saw blade dimensions: 3920 x 34 x 1.1 mm Weight: 1759 kg Machine dimensions: 2170 x 2100 mm The standard equipment of the machines is as follows: - Sturdy steel construction with double-column design - NC feed system - Infinitely variable, frequency-controlled cutting speed (inverter-controlled) - Digital cutting speed display Dcodpfoq Ulxyex Afleb - Hydraulically operated double horizontal vices - Hydraulic saw blade tensioning - Saw blade guides (including back guide) made of carbide - Hydraulically pre-tensioned blade guides - Precision PLC control system for all hydraulic and electrical components - Cut counter with automatic shut-off - Automatic out-of-stock shut-off - Multi-job function - Bundle clamping device - Powered chip brush - Automatic blade breakage control incl. emergency shut-off - Chip flushing pistol - Flexible work lamp - 2-metre roller conveyor - Tool box - Carbide function Special equipment included: - Variable clamping pressure reduction - Cut deviation monitoring Extensive and complete German documentation.

Leto izdelave: 2013, Stanje: rabljeno, Cutting diameter: 420 mm Bandsaw blade dimensions: 41 x 5600 mm Cutting width: 1.3 mm Control system: Simatic S7 Touch Blade speed: 17 - 110 m/min Saw motor: 7.5 kW Bar material diameter: 420 x 3000 mm Bar material diameter: 300 x 6000 mm Total power requirement: 30 kW Dsdpfjd Izmaox Aflecb Machine weight: approx. 18.5 t Space required: approx. 12.5 x 5.0 x 2.5 m CNC sawing system with JAESPA Compact 4S band saw, equipped with round steel magazine and discharge gripper for sawing round bars from 50 to 420 mm. Includes 6 storage compartments with a maximum bar weight per compartment of 3,400 kg. Cut lengths: 20 – 1,000 mm. Like-new condition, approx. 1,000 working hours.

Stanje: rabljeno, Leto izdelave: 1982, Spindle diameter: 90 mm X-axis travel: 900 mm Y-axis travel: 900 mm Z-axis travel: 1200 mm W-axis travel: 800 mm Table clamping surface: 900 x 1200 mm Rotary movement: 360 degrees Table load capacity: 6.0 t Spindle speed: 25 - 1400 rpm Spindle taper: ISO 40 Power supply: 380 V / 50 Hz Milling spindle drive: 9.2 kW Total power consumption: 35 KVA Machine weight: approx. 10 t Dsdpfxetv H Uco Aflecb Required floor space: approx. 4.5 x 2.8 x 2.5 m The machine was fully overhauled by the manufacturer in 1994, including a new electrical cabinet, new Bosch and Heidenhain servo drives, and TNC 360 (3D control) from Heidenhain. Planing slide Ø 600 mm Traverse path: 150 mm The machine is currently not operational due to an electrical fault.

Stanje: novo, Leto izdelave: 2023, dolžina tračnega lista: 5.450 mm, širina tračne žage: 41 mm, Double-column Band Saw Fully Automatic Everising H-460 HB Cutting capacity round: 0 - 460mm Cutting capacity square: 460 x 460mm Bundle clamping width: 195 – 310mm Bundle clamping height: 120 – 230mm Drive power: 5.5 kW Saw blade dimensions: 5450 x 41 x 1.3mm Weight: 3030 KG Machine dimensions: 2820 x 2190mm The standard equipment of the machines includes: • Heavy-duty steel construction in double-column design • NC feed system • Frequency-controlled cutting speed (stepless, inverter controlled) • Digital cutting speed display • Hydraulically controlled double horizontal vices • Hydraulic saw blade tensioning • Saw blade guides (including blade back guide) made of carbide • Hydraulically preloaded blade guides • Precision PLC control for all hydraulic and electrical components • Cut counter with automatic shut-off • Automatic out-of-stock shut-off • Multi-job function • Bundle clamping device • Powered chip brush • Automatic blade breakage detection with emergency stop • Chip rinsing gun • Flexible work lamp Dedoq Ulxgepfx Aflscb • 2 meter roller conveyor • Toolbox • Carbide function Special equipment included: • Variable clamping pressure reduction • Cut deviation control Comprehensive complete German documentation.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 450 mm, Kaltenbach KKS 450 E fully refurbished. Dcsdpfx Afjwn Ixkslob The KKS 450 E is a semi-automatic mitre saw for ferrous and non-ferrous metals such as: steel, stainless steel, chromed steel, brass, copper, bronze, and more. Key advantages at a glance: - Clamping, sawing, swiveling, and release – all with one lever - Adjustable cutting height via a single lever - User-friendly mechanical controls mounted directly on the machine - Easy access for blade changes and maintenance operations - Workpiece clamping device on both sides of the saw blade - Two sawing speeds suitable for almost all applications - Kaltenbach ‘cut from below’ principle ensures optimal chip removal - Ergonomically positioned controls for convenient operation - Adjustable stroke limitation and rapid return of the saw blade For more information, please email or call.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, skupna masa: 17.500 kg, delovna višina: 1.300 mm, delovna širina: 1.300 mm, delovno območje: 1.300 mm, Amada H1300 Vodoravna tračna žaga (1982) Kapaciteta: 1300 x 1300 mm Napajanje: 230 V – 50/60 Hz / 400 V – 50 Hz / 460 V – 60 Hz Pogon rezila: 11 kW Hidravlični pogon: 3,7 kW Pogon hladilne črpalke: 0,4 kW Pogon žične krtače: 0,4 kW Dimenzije rezila: 11.380 mm x debelina 1,6 x širina 65 mm Dcodpfxjtv E Hcs Afleb Lastna teža: 17.500 kg Skupna priključna moč: 16 kW Podatki o stroju: Model: H1300 Leto izdelave: 1982 Proizvajalec: Japonska

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Dcsdpfxsuiy Hrs Aflob Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Rotation speed: 1,500/3,000 rpm Cutting speed: 2,100 – 4,200 m/min Saw height adjustment: electronic Working range (square): max. 170 x 170 mm Working range (flat): max. 300 x 150 mm Working range (round): max. 200 mm Saw feed rate: 0 – 40 mm/s, continuously adjustable Cut length: 5-950 mm (extension to 9,999 mm via multiple stroke) Feed speed (max.): 500 mm/s Weight: approx. 1,900 kg Dimensions (LxWxH): 2,200 mm x 2,700 mm x 1,950 mm The machine is in as-new technical and visual condition following a completed retrofit. Thanks to its equipment and design, the machine is highly efficient and versatile for a wide range of applications. The programmed HMI control system ensures easy and highly profitable operation of the plant. The soundproof cabin minimizes noise emissions to a very low level. The machine is fully overhauled at our premises according to customer specifications. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of the ball screw spindle - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of valve terminal - Optimization of extraction performance - Overhaul of the minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additional machine features: - Soundproof enclosure - Kerf expansion (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed upon, we provide a 6-month warranty for our systems on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Optional (available on request): - Bar clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic loading of pre-materials up to 6 meters in length - Roller conveyors for pre-material - Reinforced 18.0 kW (frequency-controlled) motor - Delivery and installation at your facility - Training for your personnel

Stanje: novo, Leto izdelave: 2025, premer žaginega lista: 360 mm, High-performance Everising Circular Saw Fully Automatic Machine (NEW) incl. magazine. Designed for the use of thin-kerf circular saw blades (Carbide / Cermet) Djdpfx Asq Ul Izeflecb Basic Data: • Application range: 15-100mm round (rectangular 15-80mm) • Drive: 11 kW • Blade dimensions: 360 x 2.6 x 2.25 mm • Saw blade speed: 40 – 160 rpm • Weight: 4 tons • Dimensions: 2900 x 7038mm (incl. magazine) Features: • Automatic loading magazine 6 meters (for 6 m round material) • Emulsion cooling option • Siemens control system • Electromagnetic braking system • Direct-driven saw spindle for extremely high cutting performance • Ball screw incl. servo motors for precise feed • Heavy-duty design • Minimum quantity lubrication • Inverter-controlled, stepless cutting speed • Fully enclosed, low-noise operation • Automatic cut-off and scrap sorting • etc. Other available models: P-50 ILA: cutting range 8-50mm P-75 ILA: cutting range 10-75mm P-100 ILA: cutting range 15-100mm P-150 ILA: cutting range 70-150mm P-160 ILA: cutting range 70-160mm P-180 ILA: cutting range 70-180mm P-230 ILA: cutting range 70-230mm

Stanje: rabljeno, Leto izdelave: 2007, Behringer HBM 540 A Automatic Bandsaw Year of manufacture: 2007 Working area, flat: 630x540 mm Round: 540 mm Saw drive motor power: 11 kW Cutting speed: 20–200 m/min 2 powered infeed roller conveyors, each 6200 mm length, 1200 mm width, with cross-shift Powered outfeed roller conveyor, 5030 mm Dcjdpfx Afewi Ii Soleb Chip conveyor This offer is intended exclusively for commercial customers as defined by §14 BGB. No sale to private individuals.