Hladna krožna žaga - avtomatska

KALTENBACH KKS 401

Stanje: dober (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.350 kg, Kaltenbach KKS 401 Fully functional Condition: very good. Dodpfoui R Dpsx Ag Noku

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 400 mm, vrtljajska hitrost (min.): 20 obr/min, največja hitrost vrtenja: 76 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Kaltenbach KKS 401 NA 2000 Retrofit Model: KKS 401 NA Year of Overhaul: 2021 Dodpfew Eyynjx Ag Njku Complete retrofit and overhaul in 2021 including electrics, control system, drives – everything new. Saw Motor: 5.5 kW, frequency controlled Saw blade speed: 20-76 rpm Cutting speed, saw blade (400mm): 25-96 m/min Working range, round: 135 mm Working range, square max.: 130 x 130 mm Working range, rectangle max.: 230 x 80 mm Kaltenbach KKS 401 Mitre Adjustment NC-controlled Kaltenbach RKS 451/KKS 401 Feed Extension 2000 mm Extended feed length for efficient processing of particularly long sections. Flat magazine for 6 m steel materials 6x2 m - For pre-loading of round, square, and profile materials - System designed for materials up to 200 mm width (compartment width adjustable) - Material insertion by chain conveyor with fillable compartments - Material separation by compartments - Fully automatic loading process controlled via the saw’s Siemens PLC system - Manual material setting at the magazine - Max. payload magazine: 2.0 tons - Material loading possible from front side - Safety guarding with light barrier - Total length approx. 7.5 m - Total width approx. 2.5 m Kaltenbach RKS 451/KKS 401 Chip Scraper Minimal quantity lubrication system by Menzel and recirculating cooling system with integrated pump - Switchable in machine settings between minimal and recirculating lubrication Remote Maintenance Module, interface for remote machine access and updates by Lupberger Systemlösungen OHG Prepared for Discharge System Integration - Hardware provision for subsequent installation of a discharge system Sequenced Control for Saw - Control is operated by the user in sequence mode - Input in surface-structure necessary for complete bar - Material fetch (for option trim flap or magazine) - Positioning relative - Positioning absolute - Absolute sawing with mitre selection (for option NC-controlled mitre adjustment and pusher feed) - Relative sawing with mitre selection (for option NC-controlled mitre adjustment) - Wiper function (for option wiper arm and material removal unit) - Material ejection front - Material ejection flap (with pusher feed and flap) - Repeat function - End of program Fully operational, very good overall condition. Can be inspected and tested under power. Price: Negotiable, plus VAT (no warranty)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Circular Saw Blade VHM / HSS: max. 425 mm Drive Power: - Two-stage with chain: 1.7/2.6 kW - Two-stage with belt pulley: 3.7/4.5 kW Cutting Speed (saw blade 400 mm): - Two-stage with chain: 10/20 m/min, 13/26 m/min, 15/30 m/min - Two-stage with belt pulley: 20/40 m/min, 30/60 m/min Continuously adjustable saw height control, fully electronic Working Range Square 90° max.: 120 x 120 mm 45° max.: Working Range Flat: 90° max.: 230 x 80 mm 45° max.: Working Range Round: 90° max.: 140 mm 45° max.: Feed Length Single Stroke: 5-2000 mm Multiple Stroke: 5-9999 mm Feed Speed AC Servo max.: 500 mm/s Weight approx.: 3600 kg Dimensions (LxWxH): 3500 mm x 1300 mm x 2100 mm Installation Area LxW: 3500 mm x 1300 mm Technical Description Kaltenbach KKS 401/ KKS 451 NA 2000 Retrofit Kaltenbach KKS 401/ KKS 451 Retrofit High-performance automatic saw for steel. Dkodpfsuiy Sbjx Ag Nju Thanks to its features and construction, the machine can be used very efficiently for a wide range of applications. The HMI interface for controlling the machine ensures easy and straightforward operation. Due to the saw design, it is possible to achieve highly accurate length tolerances. The machine is completely overhauled in our factory according to customer requirements. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Upgrade to Siemens HMI operating panel - Replacement of the ball screw - Replacement of servo motor and servo drive - Replacement of the frequency inverter for the main saw drive - New electronic components - Maintenance or replacement of all hydraulic cylinders and valve manifolds - Optimization and overhaul of the cooling system - Replacement of general wear parts - Overhaul of the machine body The machine also features: - Fully automatic material feed - Fully automatic mitre adjustment +/- 60° Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Labor, as well as consumables, are excluded from the warranty. Optional: - Chip conveyor - Chain magazine for 6m material - Outfeed gripper system for removal of cut-offs - Outfeed gripper system for removal of cut-offs and multiple end trimming - Delivery and installation at your site - Training for your personnel

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 304289, premer žaginega lista: 450 mm, hitrost rezanja: 1.000 mm/min, največja širina rezanja: 5 mm, odmični hod: 160 mm, TECHNICAL DETAILS Saw Blade Saw blade diameter (standard): 450 mm Saw blade diameter (min.): 370 mm Cutting width (max.): 5 mm Saw blade arbor – mounting bore: 50 mm Saw blade arbor – number of drive pins: 4 pcs Saw blade arbor – pitch circle diameter of drive pins: 80 mm Saw blade arbor – drive pin diameter: 13 mm Saw blade feed speed: 0–1,000 mm/min Vertical Clamping Device Opening stroke with aluminium pressure pad (miter cuts): max. 160 mm Opening stroke with steel pressure pad (straight cuts): max. 160 mm Rotary Table Rotary table adjustment: stepless ±60° Cutting Speed with 450 mm Blade Diameter Two-stage with chain: 11/22 m/min, 13/26 m/min, 15/30 m/min Two-stage with toothed belt: 35/70 m/min Frequency-controlled with toothed belt: stepless from 7 to 43 m/min, stepless from 15 to 75 m/min Feed Automation Programmable length: max. 9,999 mm Material width: max. 240 mm Offcut length with blade tiltable on one side (0/60 degrees): min. 78 mm Offcut length with remnant gripper: min. 98 mm Offcut length with blade tiltable on both sides (-60/+60 degrees): min. 265 mm Offcut length with blade tiltable on both sides and remnant gripper: min. 285 mm Clamping force max.: 3,900 N Clamping force min.: 800 N Travel speed: max. 30 m/min MACHINE DETAILS Electrical Specification Operating voltage: 400 V, 50 Hz (3-phase) Control voltage DC: 24 V Valve voltage DC: 24 V Two-stage with chain: 1.8/2.7 kW Two-stage with toothed belt: 3.7/4.7 kW Frequency-controlled with toothed belt: 4.0 kW, 5.5 kW EQUIPMENT Solid HSS blade Djdpfx Aow H Ivasg Neku Segmented HSS saw blade Feed automation

Stanje: rabljeno, Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 400 mm, rezalna zmogljivost: 5 mm, obseg rezanja okrogel pri 45°: 160 mm, hitrost podajanja os Z: 10 m/min, skupna dolžina: 1.170 mm, skupna višina: 1.960 mm, skupna širina: 1.070 mm, skupna masa: 1.350 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Cold circular saw Kaltenbach KKS 401 with 7-meter roller conveyor and automatic feed Tiger Stop 5.3. Complete with all operating manuals for sawing both steel and aluminium! Dsdpfx Agowmm D Aj Neku

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Saw blade diameter: 400 mm Cutting diameter: 130 mm Cutting range at 90 degrees, square: 120 x 120 mm Cutting range at 90 degrees, flat: 220 x 80 mm Feed length: 600 mm Multiple feed length: 1,800 mm Cutting speed: 10/13/15/20/26/30 m/min Mitre cuts +/- 60 degrees Total power requirement: 5.5 kW Dedpfsu Avkvox Ag Njku Machine weight: approx. 2,600 kg - with mitre adjustment +/- 60° with digital display - Accessories: roller conveyor, documentation, various circular saw blades