Stroj za površinsko brušenje

JAKOBSEN SJ1026

Stanje: dober (rabljeno), Leto izdelave: 2003, In good technical condition and fully functional. Year of manufacture: 2003. X-axis travel: 350 mm. Y-axis travel: 250 mm. Z-axis travel: 256 mm. Workpiece length: 750 mm. Workpiece width: 550 mm. Workpiece height: 250 mm. Machine dimensions: L 1670 mm x W 2040 mm x H 2305 mm. Kodpou Tq Hwefx Al Nolr Machine weight: approx. 2,600 kg.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, skupna masa: 35.000 kg, Ковашки чук HUTA ZIGMUNT тип MPM 1000A, 3600 кгм, произведен в Румъния, модел CM 1250. Kledjtgpdzjpfx Al Njr

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±10° Kledpfxjuxft Ee Al Ner Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight in flying operation: 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MT3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. Photo shows delivered machine with 1000 mm centre distance. - The operation via the touch panel is very straightforward. - The symbols on the control panel are almost identical to the original control system, making operator retraining unnecessary. - Diagnostic function with display of PLC information and digital I/O. - Dressing function can be extended or changed as per customer request. - On request, spindle orientation hold for the workpiece spindle is available. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital display in 2 axes. X-axis resolution 0.5 μm. Options: - Encoder with digital display on the workpiece headstock - Encoder with digital display on the grinding headstock (no height adjustment possible via spindle) - New robust internal grinding attachment diam. 80 mm or 100 mm - Increase centre height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Optional features: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control unit Note: The machine tool does not currently meet the basic safety and protection requirements as outlined in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine if the required minimum protection target can be met.

Stanje: rabljeno, Stroj za valjanje navojev ORT RP30U Kljdpot H Ty Usfx Al Njr 2-valjna 30 ton Zasukljive glave Inverter #1331 Stroj si lahko ogledate v delovanju v našem skladišču v Gussago BS. Možnost demonstracije M i m u Stroji za valjanje navojev so mehanski postopki brez odrezavanja, ki se lahko izvajajo hladno ali vroče, z namenom izboljšanja površinske kakovosti (torej tudi izboljšanja utrujenostnih lastnosti). Moč (tona): 30 Število valjev: 2

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Ksdpfxoqt Dmys Al Nelr Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, obratovalne ure: 1.120 h, Aristech control system (similar to FANUC) Number of axes: 4 Table dimensions: 640 x 470 mm X travel: 425 mm Y travel: 300 mm Z travel: 250 mm Max. workpiece dimensions: 800 x 600 x 250 mm U axis Weight: approx. 3000 kg Dimensions (LxWxH): 1860 x 2050 x 2100 mm Kledpfovvl Uasx Al Njr The machine consists of the following units: 1. Wire EDM machine – main unit 2. CNC control cabinet 3. Water tank + pump 4. Water cooler 5. Transformer No. 1 6. Transformer No. 2 (power supply) Very little used. Still under power.

Leto izdelave: 2001, stanje: rabljeno, Tehnični podatki: x-hod: 400 mm Kledjikbtnspfx Al Njr y-hod: 300 mm z-hod: 500 mm Vpenjalna površina mize: 400 x 300 mm Obremenitev mize: 50 kg Krmiljenje – polavtomatsko: LASERSOFT 3D Moč laserja: 100 W Skupna potreba po moči: 27 kVA Teža stroja pribl.: 2,5 t Potreben prostor pribl.: 3 x 3,5 x 2,8 m CNC gravirni/označevalni/konturni laserski stroj Pribl. 9.000 vklopnih ur, pribl. 5.500 delovnih ur

Stanje: dober (rabljeno), Diesel engine, drive engine, marine diesel, injection pump, fuel pump, fuel injection pump - Manufacturer: Bosch, injection pump for 6-cylinder diesel engine - Model: PES6R120/720LV B 403 860 177 RQV300-900 RV - Individual components: see photos - Quantity: 2 injection pumps available - Price: per unit - Dimensions: 460 x 215 x H325 mm Ksdpeh It Trsfx Al Njlr - Weight: 32 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Grinding length: 973 mm Centre height: 250 mm Workpiece table max. swivelling range: +6° / -9° Centres: Morse taper 5 (MT5) Grinding headstock max. travel: 100 mm Grinding headstock max. swivel range: +45° / -30° Max. grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Kljdpfx Aowhp Dnol Nsr Max. workpiece weight between centres: 400 kg Internal grinding attachment, max. grindable bore: 160 mm Machine weight: approx. 5,000 kg

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, globina grla: 1.250 mm, Radial drilling machine Make: Breda Model: R 55-1250 Year: 1994 Technical Details Klodpfov Rpf Sjx Al Nsr Manufacturer: BREDA Model: R 55-1250 Arm reach: 1250 mm Drilling capacity in steel: 55 mm Drilling capacity in cast iron:70 mm Thread cutting in steel: M 50 Thread cutting in cast iron: M 65 Spindle taper: MT 5 Arm reach: 1250 mm Cross travel of spindle head: 930 mm Min./Max. distance from base plate: 536 – 1375 mm Vertical movement of arm: 705 mm Spindle stroke: 310 mm Number of spindle speeds: 12 Spindle speed range: 30 – 1200 rpm Number of feeds: 8 Feeds: 0.06 – 1.0 mm/rev Base plate size: 2070 x 910 mm Clamping area of base plate: 1325 x 910 mm Motor power: 4.4 kW – 380 V Dimensions (L x W x H): 2.1 x 1.0 x 2.5 m Weight: 3 t Accessories Drilling table: 750 x 600 x 550 mm Coolant system Hydraulic clamping All information is supplied without guarantee. A demonstration is possible at any time in our showroom.