Odvajanje varilne megle

IVAT Profi Tower 28000 K

Stanje: dober (rabljeno), Leto izdelave: 2018, Manufacturer: INDUCTAFLEX Model: AL-3e Control: ACCURATE Touch-Screen Year of manufacture: 2018 3 servo-driven rolls Torque per roller: 3500 Nm Electrically assisted support rolls Intelligent software: - Ellipse program Gbodpfx Aovd Dftefqsg - U-bend shapes - Tangent control - Automatic section detector Specifications Metric / US Standard Horizontal and vertical operation Horizontal axis diameter: Ø 105 mm Number of rolls: 3 X-axis stroke: 0 - 400 mm Dimensions (approximate): Length: 4500 mm Width: 3200 mm Height: 2700 mm Weight: 3300 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representation or contractual terms are made. We recommend verifying all important details.

Stanje: novo, Sheet width: 2050 mm Sheet thickness: 3 mm Frame gap: 2100 mm Backgauge – adjustable: 600 mm Connected load: kW Machine weight approx.: 1.1 t Gbedpjfv H Dkefx Afqsg Dimensions (L x W x H): 2.7 x 2.1 x 1.4 m The machine operates quietly and, thanks to its geared motor with brake system, is energy efficient. Our machine is constructed as a monoblock body, welded from ST42 quality material. The machine’s blades are made from 2379 grade material, manufactured by BOHLER. These high-quality blades ensure precise cutting. Emergency stop button, foot switch, and finger protection grid are included as standard equipment. (Documentation available in English only)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1 rabljeni stroj za umetanje Haeger 412 za umetanje umetaka u lim (studs i matice sa samourezivanjem) na prodaju. U kompletu s alatom i donjim alatom u obliku slova J. Godpfx Aewbhipsfqsbg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 158 h, doseg roke: 1.300 mm, Pozdravljeni, prodajamo demonstracijskega robota UR10e, ki je bil uporabljen za konceptno študijo, katero pa smo kasneje opustili. Gbjdpsp E T N Asfx Afqjg

Leto izdelave: 2002, Stanje: rabljeno, Pressure: 63 t Reach: 315 mm Stroke: 8–100 mm Stroke rate: 140 strokes/min Ram adjustment: 63 mm Table surface: 1200 x 630 mm Ram surface: 800 x 315 mm Gedpslp U D Tefx Afqobg Through hole in table: Ø 110 mm Table height: 820 mm Ram bore: Ø 50 mm Installation height: 335 mm Total power requirement: 7.5 kW Machine weight: approx. 5 t Pneumatic clutch-brake combination Centralized oil lubrication Hydraulic overload protection Manual stroke adjustment Manual ram adjustment Two-hand operation Foot control Roller block strips in table Hydraulic clamp on the ram Counterbalance cylinder Approved for manual loading operations

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Weiler E50 x 1000 Precision Lathe (2003) Manufacturer: Weiler Model: E50 x 1000 Year of manufacture: 2003 Godpfexd Tikex Afqobg Condition: Good, used, under power Operating hours: 43,000 h Technical data: See images. Scope of delivery: - Original documentation - Rota S Plus 250-62 - Steady rest - Parat 4-position tool turret

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Stroke rate: 160 strokes/min Ram surface: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Throughhole in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Gjdpfx Afsb U Hwpjqobg Total power requirement: 2.7 kW Machine weight approx.: 1.9 t Space requirement approx.: 1.3 x 1.0 x 1.85 m - Ortlinghaus pneumatic clutch/brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Leto izdelave: 2002, Stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Gbsdpfx Aet Hw Shefqog Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Gedpfob U Hwnsx Afqsbg Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating capacity: 1370 Nm Single stroke capacity: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Table through-hole: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Table through-hole: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication system - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: novo, Pressure: 40 t Throat depth: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Gbjdpjb U Hwmefx Afqog Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Passage opening in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam controller Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch