Tračna stiskalnica

ISAR ISP 650

Leto izdelave: 2026, stanje: novo, Our belt presses are equipped with two large pressing rollers, which extend the pressing process and ensure exceptionally gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tensioning system and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially developed water nozzles. Only a compressor with 8 bar pressure and a ½” water connection are required for cleaning. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information • Rated capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A Blsdpfjv Sq S Njx Aiqjn • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless belt speed control • User-friendly operation • Easy to clean • Mobile machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Feed height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Options: Juice collection tray ISW 100 Automatic juice discharge

Leto izdelave: 2026, stanje: novo, The washing system with hammer mill for fruit and vegetables is constructed entirely from stainless steel and is equipped with a sorting grid, a washing tank, and a conveyor belt. The produce is loaded into the water, where it undergoes a preliminary wash. It is then transported further via the conveyor belt, which cleans the fruit thoroughly with fresh water. After cleaning, the produce enters the mill, where it is processed to the desired mash consistency using the preferred screen. Bsdpfxov Srgus Aiqsln • Easy to clean • Low maintenance requirements • Belt speed is continuously adjustable in both directions • Equipped with 2 swivel castors • Equipped with 2 fixed castors Technical specifications: • Rated output: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4“ • Connection for cleaning: G ½“ • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0104, 2 kosa Bledpfszlladox Aiqen Kot novo.

Stanje: pripravljen za uporabo (rabljen), Feed the crown caps manually into the drop chute; the machine places the crown cap onto the bottle and presses it on. Blodpsfh Dlrefx Aiqen

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Na voljo je laboratorijski kroglasti mlin Netzsch. Pogonska moč: 1,5 kW, hitrost vrtenja: 4200 obr/min, območje premera kroglic: 0,05 mm–2 mm, skupni volumen kroglic: 140 ml, največji volumen izdelka na serijo/cirkulacijo: 140 ml/500 ml, največja viskoznost izdelka: 5000 mPas. Dimenzije stroja (D/Š/V): cca 850 mm/600 mm/700 mm, teža: cca 100 kg. Dokumentacija je na voljo. Možen je ogled na lokaciji. Blodpfxoxvrt Sj Aiqon

Stanje: novo, Leto izdelave: 2026, Trough conveyor belt | Troughed belt conveyor | Conveyor belt Demonstration machine Manufacturer: S&F GmbH Model: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0° incline) Drive: Helical geared motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tension drum: Drum diameter 220 mm with spindle tensioning station Bledpfx Aiew Ad Rroqon Belt: Rubber steep-angle conveyor belt EP 250/2 2:1 with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 fir green Suitable for, among others, the following bulk materials: Wood chips, sawdust and wood dust, biomass, wood pellets, charcoal, waste wood, bark, earth, humus, recycling material, trimmings, and much more. Accessories (optional): Feed hopper, belt scraper, chassis, drawbar, steel support, electrical installation (plug switch 16 A) Trough conveyor belt | Troughed belt conveyor | Conveyor belt | Bulk material conveyor | Belt conveyor | Inclined conveyor belt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Naprodaj 4 spiralni transporterji (cena za 1 kos). 2 kosa, dolžina 5,8 m (1 kos brez priključkov; 1 kos (razrezan na pol) je treba zvariti). 2 kosa, dolžina 7,3 m. Oba transporterja imata originalne priključke (1 transporter je sestavljen iz 2 delov). Bodeibwfzopfx Aiqeln Podrobnosti o motorju so na fotografiji. Če imate kakršna koli vprašanja, nas prosimo kontaktirajte. Če vas zanimajo vsi transporterji, vam lahko ponudimo ugoden popust.

Stanje: novo, Washing plant WA LC40 with Raetz mill RM40 for belt presses EBP500, EBP650, and EBP820 Rated capacity: up to 2,000 kg/h Motor power: 6.2 (8.5) kW (HP) Electrical connection: 400V 50Hz (3-phase) Electrical protection: 16 A Length: 2,000 mm Width: 700 mm Height: 2,400 mm Intake height: 800 mm Weight: 285 kg Material: 1.4301 / AISI 304 Cleaning connection: 1/2" internal thread Washing tank connection: 2" external thread Bjdob Ncc Djpfx Aiqsln Pulp discharge height: 1,500 mm Fruit discharge height: 800 mm Scope of delivery: 7mm, 9mm, and 12mm cutting sieves included

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 10.000 l, Diesel refueling station – On-site refueling station – Commercial refueling installation – consisting of: Bodpfx Aisi An Ufeqsln 1 x storage tank, 10,000 liters capacity, used 1 x fuel dispenser, model Eco 75, brand new Storage tank description: According to DIN 6616-D, above-ground, double-walled, including test certificate. The tank is supplied with two saddle feet, a manhole with dome cover, is used, internally emptied and professionally cleaned, equipped with the following fittings: - 1 fill pipe with TW cap (filler cap) and dip pipe - 1 gauge pipe with dipstick and dipstick closure - 1 vent pipe with ventilation hood - 1 brand new overfill prevention sensor with type approval (AIII) - 1 ladder and 1 spare socket for extraction purposes - 1 optical leak detection device with type approval and leak detection liquid The tank will be newly primer-coated and painted externally (RAL color tone). L = approx. 5.30 m - D = 1.60 m - Weight approx. 2.4 t - ex works, loaded free of charge Fuel dispenser description: Model Eco 75 – not suitable for calibration (non-legal-for-trade), Delivery rate up to approx. 75 l/min, suitable for diesel fuel, including: - Fuel management terminal with connection to myTecalemit Cloud - Incl. web-based tank data management software – Basic module - 2 ID systems for driver/vehicle, max. 4,000 users - Identification via transponder technology - USB interface for data retrieval - Vane cell pump with single-phase asynchronous motor – 230 Volt - Oval gear meter with pulse generator, accuracy approx. +/- 0.5% - Angle seat filter / dirt filter with fine-mesh strainer - 4 m hose DN 25 with type-approved automatic nozzle, including swivel joint and nozzle holder - Nominal suction height approx. 3.5 m / max. suction line length = 6.0 m - Robust powder-coated sheet steel housing Dimensions: approx. 1,410 x 520 x 275 mm - Two-line illuminated monochrome display, character height 8 or 19 mm - Memory for up to 10,000 fueling transactions - Menu guidance in German, English, and French Magnetic keys / transponders are additionally required. General: You will receive an invoice with VAT shown separately. Purchase subject to our General Terms and Conditions. Other tank systems (new and used) as well as rental systems are also available! Additionally, we purchase existing tank systems and can, with certified specialist qualification according to the German Water Resources Act (§ 62 WHG), professionally empty, clean, dismantle, and transport them away.

Leto izdelave: 2021, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), skupna masa: 1.500 kg, skupna dolžina: 3.340 mm, skupna širina: 2.360 mm, skupna višina: 2.925 mm, vhodna napetost: 400 V, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, nujno zaustavitev, ASCO SD Compact – Drum Screen with Innovative Technology and Maximum Flexibility The ASCO SD Compact is a powerful, semi-mobile drum screen from ASCO Technology, distinguished by its modular design, high flexibility, and innovative features. With variable drum control, adjustable rotation speed, and interchangeable screening technology, this machine is ideally suited for a wide range of material processing applications. Thanks to vibration support, a cleaning brush, and a modular deflector plate system, the SD Compact delivers exceptionally efficient screening performance. The drum screen allows for the use of various perforation sizes within a drum segment, thus enabling precise separation into up to four fractions—unique in this machine class. A particular highlight is the optional bunker extension, which increases capacity by up to 50%. The machine also offers a variable support frame concept and adjustable screening angle, allowing for optimal adaptation to different operating sites. Bedpfx Aijw Ryl Heqjln With convenient features such as travel mode, rapid bunker changeover (in only 2–3 hours), and drum expansion for increased screening area, the ASCO SD Compact drum screen is one of the most versatile solutions on the market—robust, compact, and future-oriented.