Pnevmatsko rušilno kladivo

IRMER ELZE KM4

Stanje: novo, Leto izdelave: 2026, Holzkraft Bandsaw HBS 533 S. Ffjdpfeb S Uzkox Aflot Heavy-duty professional model with high dead weight for maximum smooth running Exceptionally smooth and precise operation thanks to a torsion-free machine housing Large, one-piece cast iron saw table, tiltable from 0° to +20°, with ground and polished surface Patented table tilting device with handwheel and rack-and-pinion Quick-release saw blade tensioning Ceramic saw blade guides Large cast iron parallel fence Fast and precise cutting height adjustment via handwheel and rack-and-pinion with millimeter scale Safety switch with automatic shut-off when door is opened Large cast iron parallel fence Supplied as standard with mitre gauge Flywheels made of cast iron with special coating on the running surfaces Inspection window for checking saw blade run Professional saw table guidance The heavy, solid cast iron saw table is easily and conveniently adjusted via a handwheel and rack-and-pinion guidance The tilt angle is continuously adjustable from 0° to +20° Patented Work table dimensions 750 x 530 mm Cutting speed 1400 m/min. Flywheel Ø 530 mm Max. cutting height 350 mm Max. cutting width with fence 465 mm Max. cutting width without fence 510 mm Bandsaw blade length 4190 mm Precision guides top / bottom Table tilt 0° - +45° Motor power 400 V/50 Hz/P2 4.0 kW Weight 305 kg Dimensions 1000 x 720 x 2040 Extraction port diameter 2 x 100 mm Location: Ex stock Bitburg

Stanje: novo, ELMAG Stone Band Saw STBS-500 STBS for Dry Cutting (Bricks, Aerated Concrete, Insulation Material) The stone band saws of the STBS series are specifically designed for use on construction sites. When used for dry cutting, they are suitable for precise processing of materials such as aerated concrete, bricks, lightweight clay blocks, expanded clay, and wood, but also for insulation boards like Styropor and Styrodur. ADVANTAGES • Extraction port for dust extraction available • Saw band tension easily and optimally adjustable with handwheel • Includes forklift pockets and lifting eye • Constant saw band tension and 440 mm running wheels for reduced risk of band breakage and precise cuts Ffsdpfot Egfzex Afljt • Direct drive with geared motor on separate motor console • Automatic saw band shutdown at end of cut • Machine stops when doors are opened • Short band change times • Straight, mitre, and manual contour cuts possible • Precise blade guide, adjustable to stone height • Easy relocation thanks to transport wheels and transport bar TECHNICAL DATA Cutting height: 500 mm Cutting length: 660 mm Angle: 0 - 45° Saw band dimensions: 3850x27 mm Table size: 710x1060 mm Nominal power: 1.85 kW Power supply: 230/50 V/Hz Dimensions: 1050x900x1840 mm Weight: 203 kg

Stanje: dober (rabljeno), Technical Data: Working length: 2100 mm Maximum bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roll diameter: 200 mm Bottom roll diameter: 180 mm Number of driven rolls: 3 Hydraulic drop-end bearing Cone bending device Extended rolls for section bending Control panel with digital display Ffedpfx Aswchn Usflet Motor power: 5.5 kW CE marking Dimensions (L x W x H): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several sets of rolls for pipe and section rolling The seller is not liable for typographical or data transmission errors. The machine is in visual and technical condition, and wear consistent with its age; used machines are sold without any warranty.

Stanje: novo, ELMAG stone cutting machine (incl. diamond blade) STM 600/350, 230 Volt STM 610/350 The impressive stone cutting machines warrant closer inspection due to their robustness, excellent handling, and not least, their outstanding price-performance ratio. They cut just about everything: tiles, exposed aggregate slabs, paving stones, marble and granite, bricks, clinker, artificial stone ... Ideal for construction companies, landscaping businesses, and slab layers/installers. ADVANTAGES - Lockable spring tensioner for return, mounted on two saddle bearings - Water pump S1 - Blade cooling with dosing valve - Powerful drive motor 2.2 kW / 230 V - Safety switch with undervoltage release - Long service life: steel running rollers on the rolling table run over water - Precise: adjustable longitudinal stop, measuring scale - Unmatched cutting unit for very deep cuts using a reverse cut - Includes segmented diamond blade for universal use TECHNICAL DATA Cutting capacity depth/length: 105 / 600 mm Diamond blade diameter: 350 mm Diamond blade borehole: 25.4 mm Rated power: 2.2 kW Voltage/frequency: 230/50 V/Hz Dimensions (LxWxH): 1130 x 570 x 1600 mm Weight: 72 kg Ffjdpfjt Hvlgex Aflot

Leto izdelave: 2019, Stanje: zelo dobro (rabljeno), ROLL TROLLEY / ROLL CONTAINER 3-sided WIRE MESH ROLL CONTAINER ROLL TROLLEY 810 x 720 mm Inclined roll base provides extra safety during transport of all types of goods Parcel roll trolley, parcel trolley, DHL parcel trolley, postal trolley, DHL trolley— also ideal for storing firewood and suitable for yellow refuse sacks. Total height: 1730 mm Item no.: RW-3173 Price: €75 net / per unit Used, with signs of use and occasional paper residue Fully functional / ready for immediate use Roll containers are fully anonymized: no branding or reference to previous owners is visible. Trolleys are delivered fully assembled, as pictured. (New unit observed for: 1 piece at €189) Currently approx. 5,000 roll trolleys in stock. Item is used & extremely robust Load capacity up to 500 kg Offered as pictured Item can be viewed by appointment Description: (Ideal for up to 5 intermediate shelves, see further photos; Intermediate shelves are not included, but are available on request) COLLECTION by prior arrangement from warehouse at 47441 Moers possible. Inspection expressly encouraged; item can be taken immediately if interested. Description: Plastic rolling base type 724 x 815 mm; with 2 reinforcement irons, with castors ø 108 mm, polypropylene, 2 swivel castors / 2 fixed castors Tube diameter for steel frames: tube ø 22 mm Ffjdpfx Afeh S E A Ejljt Load capacity: 500.00 kg Colour: yellow base plate / red side grids and rear grid 2 side grids, usable height 1600 mm Total height: 173 cm Infilling: 7 x vertical flat bars 12 x 3 mm 2 x horizontal flat bars 12 x 3 mm 1 x cross tube ø 16 mm 1 rear wall incl. 4 plastic clamps with screws and nuts for connection to side grid Rearward-sloping inclined roll base We are happy to purchase used roll containers, also in large quantities. JS Trading GmbH Photos for reference; similar items shown.

Stanje: rabljeno, Hydraulic Workshop Press, Broaching Press, Keyway Broaching Press Hydraulic Workshop Press, Custom built MaVo Type 5t-20 Previously used for broaching keyways in through-holes. Press capacity: 5 tons (at 100 bar hydraulic pressure) Frame width: 770 mm Cylinder stroke: 220 mm Distance from piston rod thread to table traverse: max. 900 mm Ram downwards press speed: approx. 11.5 mm/sec (220 mm in 19 sec) Ram upwards press speed: approx. 24.5 mm/sec (220 mm in 9 sec) Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Two-hand operation (2 buttons for down, 1 button for up) - HAWE hydraulic pump, Type K5/3 (can deliver up to 400 bar, but the pump becomes very loud at this pressure) Fsdpfswki Apjx Afleft - Piston rod thread connection: M42 x 1.5 mm external thread - 1 piece screw-in extension approx. 290 mm for piston rod with M42 x 1.5 mm internal thread - 1 piece screw-in extension approx. 250 mm for piston rod with M42 x 1.5 mm internal thread - 2 pieces ram extensions for inserting into screw-in extension, lengths: 110 and 130 mm - 2 support plates - Very robust steel construction made of 140 mm double I-beam - Estimated load-bearing capacity of the steel frame: likely 40 tons or more - Movable with pallet truck Required space (L x W x H): 1200 x 930 x 2280 mm Weight: 485 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 804, dolžina valja: 2.550 mm, delovna širina: 2.500 mm, najv. debelina pločevine: 16 mm, najv. debelina jeklene pločevine: 16 mm, skupna masa: 12.500 kg, 3-roll plate bending machine 2500 x 16 mm, hydraulic Manufacturer: KUMLA Model: PV 7 H Serial No.: 804, overhauled in 1987 The machine features a very robust construction and has only been used in single-shift operation. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Lower roll diameter: 305 mm Fedevxbm Ropfx Afloft Hydraulic adjustment of the rolls Dimensions: L x W x H = 5000 x 1600 x 1900 mm Working height: 1000 mm Additionally, a stair frame around the machine can be purchased.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 34.000 km, moč: 161,81 kW (220,00 KM), konfiguracija osi: 4x4, gorivo: dizel, Leto izdelave: 1995, Oprema: dodatne luči, pogon na vsa štiri kolesa, spojka prikolice, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! Ffodpfx Afoxk T Efolot From our immediately available stock of used vehicles, we offer you: Water Tender TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tenders. Equipped for most scenarios, it offers a crew seat configuration and ample space for firefighting and rescue equipment. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 hp (159 kW) • Diesel engine with manual transmission Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: • Manufacturer: Magirus Eurofire • TLF 16/25 body built to DIN standard • Three spacious side equipment compartments per side • Retractable steps for front side equipment compartments • Mounts for standard firefighting equipment • Additional mounts for 2 more breathing apparatus • Roof box Fire Pump/Water Tank: • Firefighting centrifugal pump Magirus FPN 1600-8 • Performance: 1,600 l/min at 8 bar • Water tank: 2,600 l Firefighting Equipment: • 50 m fixed quick attack line in G6 upper compartment Safety and Lighting: • 2 roof-mounted revolving beacons at the front, 1 at the rear • Pneumatic special signaling system (Martin Horn) • Rear-view camera • Hygiene board available on request We are happy to make you a specific offer and present this vehicle to you in detail at our Berlin location. All information is given to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Hot water tank / thermal storage tank made of V4A stainless steel, vertical design Technical data / dimensions Available quantity: 1 Volume: approx. 164,000 liters Tank type: storage tank Condition: used Food grade: yes Design: vertical Internal diameter: approx. 3,900 mm External diameter: approx. 4,200 mm Cylindrical height: approx. 13,000 mm Total height: approx. 17,220 mm Weight: approx. 10,500 kg Specific weight of medium: 1.0 t/m³ Operating pressure: non-pressurized Wall thickness (shell/cylinder): approx. 5.3 - 7 mm Floor clearance: approx. 1,800 mm Operating temperature: -10°C / +90°C Material / properties Internal shell material: V4A (1.4571) Outer shell material: stainless steel Internal surface: 2B finish Fodpoqagl Hefx Aflsft Internal weld seams ground smooth Insulation Insulation present Insulation thickness: approx. 100 mm Insulation material: mineral wool Insulation jacket material: aluminum Insulation jacket: bolted/riveted Remarks: Cone roof cladding: stainless steel Cylinder cladding: aluminum trapezoidal sheet Cone cladding: smooth aluminum sheet Equipment Base type: support ring/stand collar Fixation: fixed Top section: conical base Bottom section: conical base Top: 1 x manway DN 200 with insulation cover 1 x flange DN 32 welded into manway (CIP) 1 x manway drainage DN 32 1 x empty cable conduit DN 50 1 x overflow DN 150 2 x lifting eyes Shell: 1 x inlet nozzle DN 100 1 x filling line DN 100 4 x thermometer sleeves (ø 26 mm) with insulation box 1 x CIP line DN 32 1 x nameplate 1 x access door (approx. 2,000 x 1,000 mm) 1 x outlet nozzle DN 100 Bottom: 1 x pivoting cone DN 450, ending in smooth flange DN 100 Remarks: For remaining details, refer to images and drawings. Documentation Drawing

Stanje: rabljeno, Water-Sprayed Spray Wall Reinox, 2,500x2,300mm - Manufacturer: Reinox - Model: WW 25/22 - Width: 2,600 mm - Height: 1,700 mm (2,250 mm) Ffedpfx Afjumvtqjlst - Depth: 1,640 mm - Overall dimensions: 2.75 x 2.45 x 1.65 m - With water-sprayed extraction system - With water recirculation pump - Extraction fan motor power: 4.2 kW - Exhaust duct diameter: 2 x 350 mm - Equipped with control cabinet - Stainless steel design - Voltage/Frequency: 400 V / 500 Hz - Location: in stock - Voltage fluctuation tolerance: max. +/- 5%