Ultrazvočni čistilni rezervoar

INTERSONIK Ultrasonic Tank

Leto izdelave: 2003, stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Djdpfxsiyyf Io Apljut Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Leto izdelave: 2025, stanje: novo, ProdMa Sp. z o. o. specializes in stainless steel processing and configures stainless steel machines according to the customer’s requirements and capacities. Djdpfx Ajrci U Heplout Efficiency, high productivity, and excellent communication with the customer are our top priorities. Accordingly, we benchmark existing machines on the market, analyze and optimize critical areas, ensuring complete customer satisfaction. Here we offer the CB-80: Height: 2,000 mm Width: 1,120 mm Length: 4,890 mm Weight: approx. 800 kg Power supply: 50 Hz 360 V Power consumption: 1.64 kW Air consumption: 1 m³/10 bar/1 min Peeling capacity: 40 - 80 units/min Peeling diameter: 35 - 100 mm of unsorted onions

Stanje: dober (rabljeno), Loypack One Shot dozirni stroj za čokolado Stroj iz nerjavečega jekla za one-shot vlivanje, dvojni lijak prostornine 100 kg, modeli se vstavljajo v razločevalnik, nastavljivo temperaturno upravljanje, spremenljiva hitrost, ogrevan vodni rezervoar, vključuje več kot 300 različnih modelov za izdelavo napolitank, trifazni priklop. Dujdpfx Apomqm E Uolst

Stanje: novo, Leto izdelave: 2026, Popolnoma avtomatsko rezanje srednje velikih do velikih aluminijastih profilov z enostavno avtomatizacijo za uporabo. Preprosto odložite kateri koli aluminijasti profil, stroj ga avtomatsko zazna in razreže po nalogah z visoko natančnim servo pomikom materiala. Uvoz Excelovih seznamov nalog preko WIFI za enostaven vnos obsežnih seznamov za razrez. Za vsak kos aluminija, ki ga položite za razrez, ne glede na dolžino, laserski senzor izmeri dolžino. Naš zmogljiv algoritem optimizacije sproti izračuna optimalno zaporedje izreza za minimalne odpadke. Stroj po tem seznamu izrezuje avtomatsko, brez prekinitev. Vmesni vnosi niso potrebni – vi samo prinašate novo zalogo aluminija. Enostavna, hitra alternativa dvo-glavnim žagam. Preprosto vnesete (ali uvozite) potrebne dolžine in kote ter pritisnite GO. Stroj neprekinjeno proizvaja vaše kotne dele, natančno in hitro. • Popolnoma avtomatsko rezanje z avtomatskim podajanjem in rezanjem na dolžino. • Enostaven uporabniški vmesnik za avtomatsko delovanje – vnos naloge in razrez v nekaj sekundah. • Poenostavljeno razrezovanje kosov, serij ali velikih excel seznamov. • Paketno/multi-palčno rezanje in štetje. • Oddaljen vnos excel seznamov nalog prek WIFI z naprednim povezovanjem podatkov. • Popolnoma nastavljiva hitrost podajanja žage in materiala za največjo produktivnost procesa. • Samodejni optimizacijski način z laserskim merjenjem dolžine in minimizacijo odpadkov (opcijsko). • Samodejni izpis etiket za kose na podlagi podatkov iz delovne naloge (ročno lepljenje, opcijsko). • Neposredno vrstično tiskanje na material brez posega operaterja (opcijsko). • Tiskanje ali skeniranje črtnih oz. QR kod za vnos nalog (opcijsko). • Avtomatiziran servo pomik kota žagine glave do ±75° (opcijsko). Odlično primerno za: • Proizvodnjo oken in vrat • Proizvodnjo aluminijastih kotnih konstrukcij • Proizvodnjo aluminijastih sestavljenih konstrukcij • Proizvodnjo kompozitov Dujdof Ekn Iepfx Apljt • Proizvodnjo žaluzij, senčil in pohištva • Trgovino z aluminijem Model: A550 Dolžina: 3 m Linearni pogon: ProfiStop Alpha Dolžina materiala: 1680 mm Potisna zmogljivost: 20 – 40 kg Programska oprema: Optimiser KAKOVOSTNI STROJI IZ AVSTRALIJE.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, CNG trailer for methane-natural gas, 200 bar Dodpfx Aet D Aptoplout Manufacturer: SAMRO Year: 1993 Tare weight: 6,900 kg We also offer other tanks for LIN (liquid nitrogen), LOX (liquid oxygen), LAR (liquid argon), LNG (liquefied natural gas), and CO2 (carbon dioxide), as well as argon, oxygen, nitrogen, carbon dioxide, hydrogen, and methane. We would be happy to provide you with a quotation or further information about other pressure vessels. Please contact us by phone or email for more details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 680 kW (924,54 KM), Oprema: hladilna enota, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Dujdpfx Aevllxdepljt Year of manufacture: 2004 Rated capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant charge: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on usage parameters) Number of fans: 5, diameter 900 mm Air flow rate: 162,500 / 131,000 m³/h Fan motor power consumption: 17.60 / 11.50 kW Heat exchanger area² Operating noise: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically inspected and is fully functional.

Stanje: novo, Leto izdelave: 2026, Recirculation chamber furnace, electric, new unit, delivery time 12 weeks - Temperature: 250°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Volume: 8,820 liters - Control: Eurotherm Nanodac (controller/recorder with color touch display) - 2 circulating air fans - Double doors with safety door sensors - Overtemperature protection: Eurotherm 3216i - 2 fresh air fans - Automatic dampers - Electrical design: 400 V / 50 Hz / 3NPE - Increased heating capacity: approx. 70 kW - Temperature accuracy: +/- 6 K in empty furnace Dujdpfxjv Hg Eue Aplot - Documentation, CE declaration of conformity - Electrical wiring diagram with spare parts list Note: The furnace floor is not insulated, but only covered with stainless steel sheet, allowing unobstructed access with any track gauge. Optionally, the floor can be supplied insulated (with entry rails to be defined by the customer). We offer new and used industrial furnaces, which we can also retrofit and customize according to customer requirements. Furnace, ovens, drying oven, industrial furnace, drying cabinet, heat oven, heat cabinet, recirculation oven, chamber oven, preheating oven, chamber recirculation oven, tempering oven, annealing oven.

Stanje: novo, Column drill, precise, quiet, and reliable. Manufactured according to strict safety standards. Duedpsir Aihefx Aplot Precision spindle shaft with tempered Morse taper, machined base plate. Supplied with electronic speed variator. Rotating table + vice 350 x 250 mm. Drilling capacity in steel: R50 mm ø 22. Tapping capacity in steel: R50 mm M 14. Spindle taper: MT2 Spindle stroke: 90 mm. Spindle quill diameter: 52 mm. Column diameter: 98 mm. Distance from column to spindle center: 201 mm. PU belt drive Electronic speed variator (E). Spindle speed: 270 ÷ 4,200 RPM. Motor power: 0.75 kW / 220 V Single Phase. Dimensions (h x w x d): 1950 x 600 x 680 mm. Weight: 220 kg.

Stanje: nepreverjeno (rabljeno), Various refrigeration units and condensers from a bottling plant, dismantled, for sale, including: 10 refrigeration systems, manufacturer Hafner + Muschler, complete on frame, each with 2 compressors, including electrical and control cabinets, refrigerant R134a, power consumption: 150 kW / 198 kW / 238 kW, years of manufacture 2002 - 2008, dimensions approx. 3,100 mm x 1,600 mm each 3 condensers, manufacturer Thermofin, each with 4 fans, years of manufacture 2006 / 2008 / 2016, dimensions: 4,200 mm x 2,300 mm each 4 condensers, manufacturer Güntner, each with 8 fans (890 rpm), 246.7 l volume, 32 bar, years of manufacture 2002 / 2016, dimensions: 6,150 mm x 2,300 mm Dujdpfxjh Nq E Ss Aplot 2 condensers, manufacturer Güntner, each with 6 fans, 93 l volume, 28 bar, year of manufacture 2002, dimensions: 6,050 mm x 2,400 mm

Stanje: dober (rabljeno), Copeland Multi Compressor Refrigeration Units Deep Freeze / Normal Cooling - 4x Copeland D6DT5-320X-AWM/D compressors - Cooling capacity: 220 kW at -10ºC/+40ºC, 56 kW at -35ºC/+40ºC - Displacement: 4 x 126.9 m³/h - With original Güntner GVH 067B/2x3N condensers - Quantity in stock: 1 unit - Refrigerant: R404A - In very good condition We have many other refrigeration systems: Bitzer, Copeland, Frascold, Lunite, Küba, Güntner, ECO, Alfa-Laval, Goedhart, Helpman Duodpfog N Hu Sox Apljt We also offer a wide range of other refrigeration equipment: chillers, compressors, coolers, condensers, cold rooms, refrigeration and catering furniture, as well as machines and equipment for gastronomy and meat processing. View our other listings or contact us directly— not all items are listed on Machineseeker.