Miza za izvrtavanje

INFRATIREA MRD 1700x2000/3000

Stanje: rabljeno, TEHNIČNI PODATKI - Razdalja med konicami: 600 [mm] - Višina konic: 175 [mm] - Nagib mize: 11 [°] UNIVERZALNI NOSILEC BRUSNEGA KOLESA – VRETENO - Mere levega brusnega kolesa: 400 x 50 x 127 [mm] - Mere desnega brusnega kolesa: 225 x 20 x 76,2 [mm] - Moč motorja: 3 [kW] - Hitrost vretena: 1500 / 1700 / 2200 - Usmerjenost nosilca brusnega kolesa: 270 [°] NOSILEC OBDELKA – VRETENO - Usmerjenost nosilca obdelka: 360 [°] - Hitrost vretena obdelka: 20 – 400 [min⁻¹] - Notranji stožec: Morse 5 - Moč motorja: 0,9 [kW] Kedpfx Abouhbywobjwt PROTIVRETENO - Notranji stožec: CM4 - Hod pinole: 30 [mm] DIMENZIJE - Potreben prostor: 2580 x 1680 [mm] - Višina: 1670 [mm] - Teža: 2200 [kg] OPREMA - FISCHER notranje vrtalno vreteno: 14.000 [min⁻¹]

Leto izdelave: 1984, Stanje: pripravljen za uporabo (rabljen), Rafamet UBB 112/2 Minimalni premer tekalne površine kolesa: 700 mm Maksimalni premer tekalne površine kolesa: 1120 mm Dolžina vpenjanja: 540 – 1050 mm Minimalna dolžina osi kolesnega para: 1640 mm Maksimalna dolžina osi kolesnega para: 2800 mm Maksimalna širina pnevmatike: 150 mm Maksimalna teža kolesnega para: 4000 kg Hitrost pomika sani nastavitve: 2000 mm/min Maksimalni pomik sani: 2000 mm/min Moč glavnega pogonskega motorja: 80 kW Teža cca: 40000 kg Kwedpfxshvml Ie Abbst

Stanje: dober (rabljeno), NC Rotary Table with Motor Drive Kjdpfsfr Ih Dsx Abbewt Continuously Adjustable Rotary Table (Indexing 0.001°) Manufacturer: Rückle Model: PKT 1000 Clamping Surface: 1400 mm x 1400 mm Overall Height: 319 mm Clamping Slots: 7 units Slot Size: 22 H7 mm Slot Pitch: 160 mm Centering Bore: 140 H6 mm Condition: Very good (used) Optional with machine base About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system modernization. Our services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system upgrades

Stanje: dober (rabljeno), Leto izdelave: 2009, dolžina podajanja os X: 6.000 mm, dolžina pomika po osi Y: 3.000 mm, dolžina podajanja os Z: 1.500 mm, model krmilnika: HAIDENNAIN, dolžina obdelovanca (maks.): 6.000 mm, širina obdelovanca (maks.): 2.500 mm, širina mize: 6.000 mm, dolžina mize: 2.500 mm, Portalfräsmaschine mit 5-Achs-Kopf Ksdpfx Aovcqybsbbewt

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. Ksdpfxsfg E Hpj Abbowt - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: rabljeno, Leto izdelave: 2008, premer struženja: 275 mm, izvrtina vretena: 80 mm, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 1.345 mm, skupna višina: 2.232 mm, skupna dolžina: 4.339 mm, skupna širina: 2.232 mm, skupna masa: 7.600 kg, Oprema: dokumentacija / priročnik, Mori Seiki NL 2500 SY / 1250 CNC stružnica z Y-osjo, gnanimi orodji in drugo glavno vreteno CNC krmilje MSX-850-III (Mitsubishi 720 BM) Premer struženja 275 / 366 mm Premer izvrtine vretena 80 mm Hitrost vrtenja vretena 4000 min⁻¹ Glavni vretenski motor 18,5/15 kW Pomik X-osi 260 mm Pomik Y-osi +50 / -50 mm Pomik Z-osi: 1345 mm Pomik W-osi (protiprimež od glavnega vretena) 1275 mm Min. indeksiranje C-osi glavnega vretena 0,001° Število orodij v revolverju 12x Ksdpfsxnmzhjx Abbewt Število gnanih orodij 12x Orodni konus BMT Podajalnik palic LNS Quick Load Servo III Vreteno gnana orodja 6000 min⁻¹ Za vsa vprašanja o stroju ali za dogovor o ogledu nas prosimo kontaktirajte po telefonu ali elektronski pošti. Vabimo vas, da si ogledate tudi naše druge oglase in pridobite celovit pregled nad našo zalogo.

Stanje: rabljeno, Leto izdelave: 2000, Vrtalni stroj Proizvajalec: TOS Tip: VARNSDORF WHQ 13.8 CNC Leto izdelave: 2000 CNC krmiljenje: Heidenhain 426 Kjdpfxox A Ayio Abbowt Popolnoma obnovljen leta 2022 Na voljo je poročilo Pomiki X/Y/Z: 3.500 x 2.500 x 1.250 x B800 mm Število osi: 5 Dolžina mize: 2.200 mm Širina mize: 1.800 mm Vpenjalna površina: 1.800 x 1.600 mm Nosilnost mize: 12 t Število mest za orodja: 60 Vpenjalno vreteno: SK 50 Premer vretena: 130 mm Vrtljaji vretena: 2.500 1/min Moč: 90 kW Ručni kolešček Heidenhain Teleskopski ščitnik popolnoma obnovljen z novim strgalom. Mere (D x Š x V) pribl.: 7.500 x 6.950 x 4.000 mm Teža: 40 t 21126ä

Stanje: novo, 1 brand-new universal milling head, HURON system Manufacturer: EMENA Model: V 0, ISO 40, standard version Technical specifications: - Taper: ISO 40 - Projection: 270 mm - Rated drive power: 5 HP - Max. speed: 1,800 rpm - Weight: approx. 32 kg Design: Standard, with adapter plate / mounting flange on the head side completed, machine side unfinished, suitable for retrofitting to conventional, NC, or CNC milling machines or any type of boring mill, HURON system Option: - Elevated / extended design Delivery time: approx. 3 months after receipt of order and payment Images are similar! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel Kjdpfx Abjbpmv Ssbswt

Stanje: skoraj kot novo (rabljeno), premer struženja: 1.500 mm, MAXIMUM WORKING DIAMETER: 1600 mm. Kwsdpfxsr Ui R No Abbot MAXIMUM WORKING LENGTH: 3000 mm. SPINDLE DIAMETER: 83 mm. OUR MACHINE IS FULLY OPERATIONAL AND PROBLEM-FREE. ALL SPEEDS AND AUTOMATIC FEEDS ARE IN VERY GOOD CONDITION.

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice Kedofg E Hlepfx Abbswt