Večvretenska naprava

INDEX MS40-6

Stanje: rabljeno, Leto izdelave: 1988, obratovalne ure: 30.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20992, Spoštovani, predstavljamo vam priložnost za nakup vakuumske peči IPSEN VTTC-324, letnik 1988. Tehnične značilnosti vakuumske peči: - Nazivna moč (Sn): 165 kVA - Nazivna napetost (Un): 400 V, 50 Hz - Nazivni tok (In): 240 A - Uporabne dimenzije komore: 450 mm x 600 mm x 900 mm - Moč grelcev: 120 kW - Napetost grelcev: 43 V, 50 Hz - Tok grelcev: 1613 A - Temperaturno območje: 350 – 1320 °C - Absolutni vakuum: 1 x 10⁻⁵ (difuzijska črpalka) - Absolutni tlak: 5 bar Skupaj s pečjo prejmete tudi veliko rezervnih delov in dodatne opreme za proces toplotne obdelave (posoda za plin, grelci, večje število krmilnikov, polnilniki ipd.). Hfsdpfewah R Rex Af Teb Za vse dodatne informacije me, prosim, kontaktirajte.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 14.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11779, stružna dolžina: 700 mm, premer struženja: 250 mm, moč vretenovega motorja: 26.000 W, hitrost vretena (min.): 3.200 obr/min, največja hitrost vretena: 3.200 obr/min, izvrtina vretena: 65 mm, skupna masa: 8.500 kg, includes 2x Hainbuch/Ortlieb chucks, conveyor belt, swivelling probe with 2 heads, MANUAL GUIDE dialog programming, high-pressure pump 18 bar/20 l/min, SBS tool breakage monitoring, wear control Hfodpfsrdy Uqjx Af Teb Machine year: 2013 – Commissioned: 05/2014 good & well-maintained condition original price approx. €300,000 !!! ATTENTION -> Sale without loader !!!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.400 mm, pomik osi Y: 2.850 mm, pomik po osi Z: 1.000 mm, dolžina podajanja os X: 20.000 mm, dolžina pomika po osi Y: 30.000 mm, dolžina podajanja os Z: 20.000 mm, Droop & Rein Modimill, year of manufacture 2001, Fidia C20 Hfjdpfevk Ubxox Af Tsb

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 600 mm, pomik po osi Z: 650 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: TNC640, Technology: Direct drive Hfodpfx Afetpm Stj Teb Spindle speed: 12,000 rpm Power: 20 kW Torque: 128 Nm Tool holder: SK 40 Tool changer: 40 stations Working Area Travel X: 1,000 mm Travel Y: 600 mm Travel Z: 650 mm Fixed table (X/Y): 1,100 x 600 mm Table load capacity: 1,100 kg Other Features Rapid Traverse (X/Y/Z): 36/36/32 m/min Equipment Chip management: Hinged belt conveyor Coolant management: Internal coolant supply 20 bar Coolant filtration: Oil separator Control cabinet cooling: Air conditioning unit Workpiece measurement: Renishaw OMP 40

Stanje: dober (rabljeno), Leto izdelave: 2003, Main spindle: Speed range – main spindle: max. 6,000 rpm Drive power – main spindle: 16 kW Max. torque: 155 Nm C-axis: 360° Tool turret: Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range – driven tools: max. 5,000 rpm Drive power – driven tools: 10 kW Tool holder: (VDI 30) Tool shank: 20 x 20 mm Travel distances: X-axis: 160 mm Z-axis: 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 rpm Max. torque C: 155 Nm Total connected load: Approx. machine weight: 3.7 t Approx. space requirement: 4.5 x 2.5 x 2.5 m Control: Heidenhain Hollow clamping cylinder Hfedpfx Aov Drigjf Tsb C-axis and tool drive Chip conveyor Oil and emulsion mist separator with electrostatic filter

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Hodouxfucepfx Af Tsfb Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Hjdpjia Rtdjfx Af Tjfb Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Stanje: rabljeno, Leto izdelave: 2022, DOOSAN DNM 4500 Letnik izdelave: 2022 Krmiljenje: Siemens 828D touch screen 2x sonda Renishaw 12.000 rpm max Hlajenje skozi vreteno Pomik v osi X: 800 mm Pomik v osi Y: 450 mm Pomik v osi Z: 510 mm Največja masa obdelovanca: 600 kg Magazin orodij: 30 pozicij SK40 Hsdjxq Rbwjpfx Af Tjfb - 2x sonda Renishaw - Transporter ostružkov - Kad s črpalko - Dokumentacija

Stanje: kot nova (razstavni stroj), Leto izdelave: 2013, obratovalne ure: 1.265 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 20.000 obr/min, premer struženja: 4 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Citizen R-serija avtomatskih stružnic, namenjenih obdelavi majhnih premerov. Stroj je bil zelo malo uporabljen (izdelanih samo 15.800 kosov). Letnik 2013. Opremljen z avtomatskim podajalnikom palic ASP-04. DDV ni obračunan, če je prodaja izven Turčije. Hfsdpfxjvtance Af Tjb

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification Hodpfxoul Efmo Af Tsfb - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data