Večvretensko avtomatsko podajanje palic

INDEX MS22C

Leto izdelave: 2011, Stanje: pripravljen za uporabo (rabljen), Na voljo je pokvarjen CNC Index 6-vreteni stružni stroj: Hitrost vrtenja: 10.000 obr/min, glavna moč vretena: 8,7kW/15kW, največji premer palice: 22 mm, orodnih postaj: 10, pomik X/Z: 62 mm/85 mm, pomik Y: +/-12 mm, največji vpenjalni premer: 22 mm, dimenzije stroja X/Y/Z: cca 3350 mm/1850 mm/2900 mm, teža: cca 6000 kg, krmilje: Siemens 840C. Vključno z držalom za orodje, hladilnim sistemom Knoll, podajalnikom palic Iemca SIR MS 22 P, robotsko celico HandlingTech. Eno vreteno je treba zamenjati ležaje, sinhrono vreteno pa je treba zamenjati. Dokumentacija je na voljo. Ogled na lokaciji je možen. Gsdpfx Asx E Ad Asfqoil

Stanje: rabljeno, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Maximum workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock face plate: 300 - 1600 mm with special jaws up to 2050 mm Clamping diameter in tailstock face plate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Face Plate Face plate diameter: 2000 mm Gisdpfxjxddvnj Afqsl Face plate speeds, steplessly variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Center angle of flange-mounted centers: 70° Support Travel of parting slide: 500 mm Travel of facing slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, facing: 800 mm/min Feeds stepless, longitudinal: 0.6 - 300 mm/min Feeds stepless, facing: 0.3 - 120 mm/min Max. cutting force on support: 20,000 kg Tailstock Face plate diameter (removable): 1650 mm Clamping diameter of face plate: 1400 mm Center angle of flange-mounted centers: 70° Rapid traverse: 1250 mm/min Special Features Copying device for first support Copying length: 8,500 mm Max. copying depth in one stroke: 500 mm Boring device: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one stroke: 2,700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rule for taper turning, setting angle up to 8° and maximum taper length (in one stroke) of 2000 mm, setting accuracy ± 5 minutes. A guide rule for taper turning, setting angle up to 15° and maximum taper length (in one stroke) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane on the headstock.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 34.044 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 270240, število vreten: 6, Premer palice (maks.): 22 mm, dolžina letve: 3.000 mm, premer vretena: 40 mm, TEHNIČNI PODATKI Število vreten: 6 Premer vretena: 40 mm Premer palice: 22 mm Dolžina podajalnika palic: 4,70 m Dolžina palice: 3,0 m PODROBNOSTI STROJA Nazivna napetost: 400 V Nazivna moč: 60 kW Priključna moč: 71 kVA Maksimalna varovalka: 125 A Omrežna napetost: 400 V Električna frekvenca: 50 Hz Krmilna napetost: 24 V DC Čas vklopa: 50.134 h Hidravlika vklopljena: 43.972 h Obratovalni čas: 38.809 h Godpfow T Rygex Afqsil Proizvodnja: 34.044 h OPREMA - Celotno energetsko dovajanje vseh 6 glavnih vreten zamenjano aprila 2025 - Single-NCU brez PCU - Podajalnik palic Iemca SIR MS22 P 33 (letnik 2015)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Reishauer RZ 362A z približno 60 kompleti diamantnih plošč Dimenzije brusnega polža: Min./maks. zunanji premer: 280/350 mm Širina: 84/104 mm Najv. razmak z omejitvami: MOD 8.0 (DP 3,2) Število začetkov: z omejitvami do 3 Gjdpfxsxb Ufus Afqjil Najv. uporabna širina (pomik): 90 mm Podrobne tehnične informacije so na voljo v priloženi PDF datoteki. Dodatki: Orodje za profiliranje Približno 60 kompletov diamantnih plošč Brusni kamni Turbo separator

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel, sliding/fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Gsdpowuddvjfx Afqsil Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Swivel angle B-axis degrees 105 Lower turret: Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back working attachment: Tool stations qty. 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Tool holder diameter mm 25 Sub spindle: Max. spindle bore mm 20 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant unit (basic): Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions: Length x width x height mm see installation plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Control: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Gjdpfxjvgxfyo Afqsil Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant through spindle Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel The machine is supplied with many tools.

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: Gisdpfx Afouxfuceqol - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Leto izdelave: 1996, Stanje: rabljeno, Schütte SF 26S DNT Year of manufacture: 1996 Control: Siemens 840C Number of spindles: 6 Max. bar diameter [mm]: 26 Bar loader magazine: Cucchi BLT Multi-6 (year 2015) Positions I + III + IV + VI: Longitudinal and cross slides Godpfx Afei Hb Szoqsil Positions II + V: CNC slides Feed in position VI Pick-off device in position VI Coolant system Ruez hinge belt conveyor integrated in machine bed Knoll hinge belt conveyor 280 S-1/40 ID 26565 (external) Electrostatic separator ISI RON/A 2500A, ID 26295

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or Giedpfx Afoia Rtdsqel

Stanje: rabljeno, Leto izdelave: 2007, Tehnične podrobnosti: Gjdpsx Aq E Hofx Afqeil Premer čelne plošče: 1600 mm Skupna potrebna moč: 80 kW Teža stroja pribl.: 25 t Potrebni prostor pribl.: 4,4 x 4,62 m Premer obdelovanca - maks.: 2000 mm Največji premer pri čelnem struženju: 1800 mm Vpenjanje orodja: ISO50 Stroj je bil redno vzdrževan in je v tehnično dobrem stanju. Z osjo C.