CNC večvretenska avtomatska stružnica

INDEX MS 32 B

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6300 rpm - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X-axis fixed, Z-axis NC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: X and Z axes CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: X-axis fixed, Z-axis NC-controlled - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled, with counter-spindle - Slide unit 6.2: X and Z axes CNC-controlled EQUIPMENT - CNC SIEMENS 840D - Counter-spindle - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Parts removal unit Rjdpfx Asuhaumsltjcd - Parts ejector - Fire protection system: KRAFT UND BAUER * Note: Functional capability not guaranteed. To be checked by a qualified company appointed by the buyer.

Leto izdelave: 2019, obratovalne ure: 4.525 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12, STROJ ZA LUŠČENJE IN RAVNANJE PALIC V KOMPLETU Oprema je v brezhibnem delovnem stanju in jo je mogoče preizkusiti pod napajanjem. Popolnoma prenovljena leta 2019 (popolnoma nova mehanika in elektronika). Delovno območje: Ø 20 – Ø 80 mm Dolžina palic: 2,5 – 6,0 m Obdelovalna toleranca: ISO h9 (možna tudi h8) Globina luščenja: do 3,5 mm, odvisno od vrste jekla Vrste jekla: ogljikovo jeklo, ležajno jeklo, vzmetno jeklo ipd. Hitrost podajanja: digitalno nastavljiva 0,5 – 12 m/min Število vrtljajev glave za luščenje: do 1700 min⁻¹ Rezila: dva kompleta po 4 nože z avtomatskim digitalnim pozicioniranjem (trikotni in dolgi noži) Avtomatska nalagalna miza s števcem palic Podajni valj z motoriziranim nastavljanjem višine Vhodni tlačni valji – 4 vertikalni valji z invertnim DC motorjem Stroj za luščenje sestoji iz: - Sprednji vodilni sistem - Glava za luščenje s 4 noži - Zadnji vodilni sistem Voziček za izvlek palic Glavni motor in prenos Rcsdpfx Aljwqb Scjtjd Izhodni stiskalni valji – dvojni Odlagača miza z motoriziranim nastavljanjem višine Zbiralnik s števcem in avtomatskim prevzemom končanih palic Hidravlična enota – povsem nova Električna omarica – nova, z dvema moduloma.

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 Rodpfx Alsuhatpotecd - Max. diameter: 32 mm - Spindle speed: 6300 rpm - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 1.2: X and Z axes CNC controlled - Slide unit 2.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled with counter spindle - Slide unit 6.2: X and Z axes CNC controlled EQUIPMENT - SIEMENS 840D CNC - Counter spindle - Polygon turning attachment: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit - Parts removal - Parts ejector - Fire protection system: KRAFT UND BAUER * NB: Functionality not guaranteed. Inspection by a qualified company of the buyer is recommended.

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6300 rpm - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 1.2: X and Z axes CNC controlled - Slide unit 2.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled, with counter spindle - Slide unit 6.2: X and Z axes CNC controlled EQUIPMENT - CNC control: SIEMENS 840D - Counter spindle - Polygon turning attachment: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump Rcedouhatcjpfx Alted - Chip conveyor: KNOLL - Cooling unit - Parts removal - Parts ejector - Fire protection system: KRAFT UND BAUER * Note: Functionality not guaranteed. To be checked by a qualified company engaged by the buyer.

Stanje: dober (rabljeno), Brezsredinski brusilni stroj Rcodotrguvopfx Altod

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm Rcedpfsuhar Esx Alted - Spindle speed: 6300 rpm - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 1.2: X and Z axes CNC controlled - Slide unit 2.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled, with counter spindle - Slide unit 6.2: X and Z axes CNC controlled EQUIPMENT - SIEMENS 840D CNC control - Counter spindle - Polygon turning attachment: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/38 F - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit - Parts catcher - Parts ejector - Fire protection system: KRAFT UND BAUER * NOTE: Functionality not guaranteed. Inspection by a qualified company on the buyer’s side required.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Pressing force: 320 t Sheet thickness: 0 mm Stroke rate: 80 strokes/min Total pressing force: 320 t Stroke: 30 – 80 mm Clamping surface (lower table): 630 x 740 mm Clamping surface (upper table): 630 x 630 mm Total power requirement: 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in an as-new condition with a new CE marking. MAIN RAM Total force (nominal): 320 t Stroke min.: 30 mm Stroke max.: 80 mm V-RING Rcjdpfx Aovwgl Njltjd Nominal force: 160 t Stroke: 30 mm COUNTER RAM Nominal force: 80 t Stroke: 30 mm TOOL DIMENSIONS Lower table width: 630 mm Lower table depth: 740 mm Upper table width: 630 mm Upper table depth: 630 mm Max. daylight: 320 mm ELECTRICAL SPECIFICATIONS Total power consumption: 60 kW

Stanje: rabljeno, Leto izdelave: 2012, x-axis travel: 630 mm y-axis travel: 800 mm z-axis travel: 750 mm Control: SIN 840D sl Siemens B axis: 360 x 0.001° A axis: -200 to +25 x 0.001° Spindle speed – infinitely variable: 20 – 18,000 rpm Drive power 100% duty cycle: 28.00 kW Drive power 40% duty cycle: 34.00 kW Torque at 40% / 100% duty cycle: 110 / 84 Nm Tool holder: HSK 63 Feed rate X/Y/Z axis: 1 – 100,000 mm/min Rapid traverse X/Y/Z: 100.00 m/min Feed force X/Y/Z: 9 / 6 / 9 kN B-axis feed: 1 – 14,400°/min A-axis feed: 1 – 7,200°/min Pallet size: 2x 500 x 500 mm Max. workpiece weight: 400 kg Max. workpiece diameter: 800 mm Max. workpiece height: 800 mm Tool magazine with 63 positions Max. tool diameter: 280 mm Max. tool length: 550 mm Max. tool weight: 15.00 kg Rodpfxevxwxve Altscd Total connected load: 65.00 kW Machine weight approx.: 14.00 t Space requirements approx.: 5.50 x 3.50 x H3.20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage monitoring, and emulsion mist separator. Machine was integrated in a production line, therefore supplied without chip conveyor and without coolant system.

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, potovalna razdalja osi X: 780 mm, pomik osi Y: 560 mm, pomik po osi Z: 560 mm, teža obdelovanca (maks.): 4.000 kg, število mest v zalogovniku orodij: 120, proizvajalec krmilnikov: Heidenhain, skupna višina: 2.800 mm, skupna dolžina: 6.000 mm, skupna širina: 6.000 mm, skupna masa: 12.000 kg, dolžina mize: 630 mm, širina mize: 500 mm, model krmilnika: iTNC530, nazivna (navidezna) moč: 61 kVA, hitri pomik na osi Z: 50 m/min, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, največja hitrost vretena: 18.000 obr/min, hitrost vretena (min.): 20 obr/min, obremenitev mize: 4.000 kg, delovne ure vretena: 19.500 h, Oprema: transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, DMG DMC 60T RS3 with Heidenhain iTNC 530, no maintenance backlog, in good condition. Ideal machine for unmanned operation, geometrically within new machine tolerances. Rjdpjrxrklefx Altscd The machine can be measured and inspected on-site by arrangement. Machine Data: Machine type: Machining center with pallet storage Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: Good Equipment: - Direct absolute linear measuring systems in X/Y/Z (glass scales) - Chip conveyor - High-pressure coolant system (40 bar) - Extraction unit - NC rotary table - Tool magazine with 120 pockets - Heidenhain touch probe - Rotary viewing window - High-pressure coolant (40 bar) - Signal lamp - Chip flushing system - Operating mode 4 Technical data: Number of axes: 5-axis CNC control: Heidenhain iTNC 530 NC rotary table, clamping area: 500 mm x 630 mm Weight: approx. 9,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Travels and axes: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: -90° to +12° Feed rates and rapid traverse: X-axis: 50 m/min Y-axis: 50 m/min Z-axis: 50 m/min B-axis: - C-axis: 30 m/min Motor spindle: Max. speed: 18,000 rpm Taper: HSK A63 Tool changer: Automatic tool changer: Yes Tool magazine capacity: 120 Pallet changer: 5 pallets

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, številka stroja/vozila: 30216 & 30277, dolžina podajanja os X: 1.000 mm, potovalna razdalja osi X: 1.000 mm, Univerzalni rezkalni stroj za kov Proizvajalec: MAHO Model: MH 1000 Na voljo 2 kosa! x-hod 1000 mm Vpenjalna glava SK 40 Digitalni prikaz. Glava nagibna +/-. Miza nagibna in vrtljiva +/-. Pomik pinole. - 3-osni digitalni prikaz - Univerzalna miza 1.250 x 740 mm (T-utori 16 mm) - Vertikalna rezkalna glava SK 40 z navojem S 20 x 2 - 6 avtomatskih pomikov pinole 0,02/0,03/0,05/0,08/0,12/0,20 mm/obrat - Centralno mazanje, ročni pogon Stroj je mogoče ogledati. Rcsdpjp S Schofx Alted Takoj pripravljen za uporabo. Prosto naloženo, prevoz ni problem.