CNC center za struženje in rezkanje

INDEX G 200

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Krmiljenje Siemens 840D, Prehod vretena 65 mm, Glavno in protivreteno, 2 x C-os, Pogonska orodja na obeh revolverjih, Vpenjalne glave Hainbuch na obeh vretenih, Protipožarni sistem, saj deluje samo z rezalnim oljem, Visokotlačna črpalka, Transporter za ostružke, Podajalni magazin FMB-Turbo, leto: 2017, Paket nosilcev orodij, Fjdpfxjy Icwne Apljpg takoj na voljo.

Stanje: zelo dobro (rabljeno), Odlično ohranjen šest vretenski stružni avtomat INDEX MS 25 s šetimi prečnimi on šestimi vzdolžnimi vodili orodij. Fodpfeqhkukjx Apljpg Cena je po dogovoru glede na izbrano dodatno opremo: vpenjalne stročnice, orodja, transporter odrezkov itd. Stroj še obratuje v proizvodnji. Po dogovoru možen ogled.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Stroj je v zelo dobrem stanju. Deloval je do konca, zdaj je v skladišču in ni priključen na elektriko. Stroj je 100 % popoln. Na voljo sta transportni trak za dele in transportni trak za odrezke. Fjdpfxowq Rwno Aplspg Premer izvrtine vretena 42 mm. 2x 3-čeljustna vpenjalna glava 160 mm 2x Hainbuch vpenjalna glava za vpenjalne puše 42 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 92.000 h, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, število osi: 5, This 5-axis Index G 200 RATIO LINE was manufactured in 2003. It features a Y-axis travel of 120 mm, a main spindle diameter of D65, and a sub-spindle diameter of D60. The machine is equipped with a turret with 12 stations and live tooling on both turret 1 and 2. If you are looking for high-quality turning and milling capabilities, you should consider the Index G 200 RATIO LINE turn-mill center we are offering for sale. Please contact us for further details. • C-axis on main and sub-spindle • Thread cutting without compensating chuck • Electronic shaft • Additional V24 RS232 interface in the control cabinet • Send/Trace function • MDE interface (machine on, machine running, part counter) • Marposs (Brankamp) collision monitoring CMS100 • 3D machine model for kinematic simulation in CAM programming • Control cabinet cooling unit • Main spindle D65 • Sub-spindle D60 • Coolant flushing of the sub-spindle (electrically actuated shut-off valve) • Foot switch • Turret (12 stations), top and bottom • Live tooling on turret 1 and 2 • "Synchronous tailstock" control function for turret 2 • Y-axis 120 mm • Automatic sliding door (hydraulic) • Coolant pump 80 l / 8 bar • High-pressure coolant connection for slides 1 and 2 with solenoid valve Fpjdpfx Aeylw Dcopleg • Coolant spray gun • Preparation for extraction and filter system connection • Operating hours approx. 92,000 h Additional Equipment • Gantry unloading device with actuated gripper, NC controlled • Gripper fingers D4-45 mm and D40-65 mm • Indexed conveyor belt • UNIMAG interface • Chip conveyor (hinged belt), discharge height 1250 mm • KNOLL vacuum rotary filter (emulsion version) • High-pressure pump 80 bar • Workpiece holding: • Collet chuck for draw tube, HAINBUCH (main and sub-spindle) • Power chuck D210 with quick jaw change, Schunk (main and sub-spindle) • Stop device • Optional: large assortment of driven tool holders and spare parts inventory

Stanje: dober (rabljeno), Leto izdelave: 2017, In this offer, you are purchasing used office furniture that is in good condition. The items were delivered in 2017 and are generally in very good condition due to minimal use. Items for Sale: We also offer workstation sets for €450 each. 1x Desk - Manufacturer: FM - 160 x 80 x 76 cm (continuously height-adjustable from 68 cm to 76 cm) - Grey tabletop - Aluminium frame 1x Office Chair "Dauphin MagicShape elan" - With armrests - Fully adjustable - Upholstery: Polo fabric, grey/black 1x Mobile Pedestal - Manufacturer: FM - 43.4 x 80 x 59 cm - One material drawer - 3 steel drawers with soft-close function - Lockable, incl. key Desks: • Approx. 10x desks by FM 1600 x 800 x 680 to 760 mm (continuously height-adjustable) in light grey. Frame made of aluminium. • Approx. 10x folding tables (can be used as desks) 1600 x 800 x 720 mm on castors, in light grey. Aluminium frame. • Approx. 2x round meeting tables, 1000 mm diameter, in light grey. Aluminium frame. • Approx. 4x high desks 1600 x 800 x 1300 mm in arctic white. Frame in white, aluminium. Chairs: • Approx. 10x Dauphin swivel chairs MagicShapeS elan with armrests, fully adjustable. Upholstery: Polo, black, base in black plastic. • Approx. 44x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ruby red. Chrome metal frame. • Approx. 52x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ocean blue. Chrome metal frame. • Approx. 10x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in black. Frame in silver. • Approx. 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ocean blue. Frame in silver. • 12x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in red. Frame in silver. • 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ruby red. Frame in silver. Storage: • Approx. 16x mobile pedestals by FM 434 x 800 x 590 mm with one material drawer and 3 steel drawers. Carcase in light grey. Handles in aluminium. Meeting table with 4 conference chairs – €750 net High table with 6 bar stools – €1,500 net Prices may vary slightly depending on the quantity purchased. We are happy to make you an individual offer. You can also purchase each piece of furniture individually. Condition: These are used items, which may show signs of use (minor scratches or yellowing). Fpedpfxsiiv Ike Apleg Packaging and Shipping: You are welcome to inspect everything during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, moč vretenovega motorja: 22.000 W, skupna višina: 2.050 mm, skupna masa: 4.000 kg, proizvajalec krmilnikov: INDEX, model krmilnika: C200-4 / C200-8, This 5-axis turning-milling center Index G200 C was manufactured in 2000. Consider the opportunity to purchase this Index G200 C turning-milling center. Contact us for more information. Additional Equipment • Synchronous device for sub-spindle machining • Tool carrier 3 for synchronized spindle (backside machining) • Additional milling spindle • Thread milling and polygon turning attachment • Non-gripper tool changer (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 • with C-axis • No driven tools Machine Advantages Technical Advantages • Space requirement (without bar feeder): 3580 x 3108 mm • Control unit: Resolution: 0.001 mm (input/output/correction) Fpedpfx Ajyailzopleg • Extensive travel ranges with multi-axis configuration • High precision with 0.001 mm resolution on the numerical control • Versatile expansion options and additional devices for extended functionality Additional Information Movement Cross Slide 1 (upper) - XYZB axes: X-axis: Travel 155 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Y-axis: Travel 120 mm, feed force 10000 N, rapid traverse 7.5 m/min, resolution 0.0005 mm Z-axis: Travel 590 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm B-axis (rotary): 360° swivel range, angle steps 5° (with detent), resolution 0.001° (with clamping), indexing time for 180°: 1 s Cross Slide 2 (lower) - XZ axes: X-axis: Travel 105 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Z-axis: Travel 307 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm Turret Right Turret: X-axis: Travel 120 mm Z-axis: Travel 400 mm Tailstock center distance: 400 mm Max force: 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Flow rate: 18 l/min System pressure: 90 bar Fill volume: 70 liters Coolant system: Pump output (switchable): 20 l/min at 18 bar / 50 l/min at 3 bar / 60 l/min at 5-7 bar Fill volume: approx. 230 liters Chip conveyor: Hinged belt or scraper Workpiece holder: Main spindle: DB5 internal taper / D140 external, optional short taper Sub-spindle: D140 external (only tensile force permitted with collet and chuck clamping) 1: Spindle bore (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle diameter at front bearing: 75 mm (with 30 mm bore) / 85 mm (42 mm) / 100 mm (60+65 mm) Max speed: 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Bar capacity (workpiece diameter): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Max torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Max power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine Depth 3580 mm

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Krmiljenje: SIEMENS Premer vretena: 65 mm Stružna dolžina: 660 mm Maks. število vrtljajev: 6.000 1/min Proti-vreteno Z= 700 mm NOSILEC ORODJA 1 z rezkalnim vretenom Rezkalno vreteno: 7.200 1/min B-os 360° 14 postaj z gnanim orodjem Vrtljaji orodij: 7.200 1/min Pomiki: X= 230 / Y= +- 65 / Z= 845 NOSILEC ORODJA 2 14 postaj z gnanim orodjem Vrtljaji orodij: 7.200 1/min Pomiki: X= 140 / Y= +- 45 / Z= 810 Transporter za ostružke Filter Fedpfjyi Uk Isx Apljpg Podajalnik palic INDEX MBL

Stanje: novo, Jaškovna peč, proizvajalec VEI Fpjdpfx Ajg R Snhopleg Tip: SCO_EB koristna višina: 1200 mm koristni premer: 1400 mm zunanji premer: 2200 mm zunanja višina (brez pokrova): 1650 mm zunanja višina (z vklj. pokrovom): 2600 mm električno ogrevana: 64,5 kW cirkulator: 5,5 kW trofazni priključek: 400 V, 50 Hz temperatura: max. 750°C

Stanje: rabljeno, Leto izdelave: 1998, Swing diameter 200 mm Turning length 400 mm Control system Siemens Type C 200-4 840 C Spindle bore 65 mm Tool changer 2 x 14 positions Driven tools 2x turret Machine weight approx. 4 t Main and sub-spindle 3-jaw chuck with various jaws Hainbuch collets Many tool holders Various driven tools Bar loading magazine "Index MBL" Chip conveyor with coolant unit Complete set of spindle reducers etc. see photos The technical data are based on manufacturer or operator information and are thus non-binding for us. Interim sale is reserved; only our terms and conditions of business and sale apply. About us: More than 400 machines in stock Over 15,000 m² warehouse area, crane capacity 70 t More than 10,000 accessory items for your workshop If you want to sell machines, production lines, or your business, please contact us. Further offers can be found on our website. Fodpfx Apoyqvygolopg Inspections by appointment possible. We look forward to your visit. Your Markus Hirsch Team

Leto izdelave: 1995, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC nasprotno-vreteni stružnica Index z Y-osjo in podajalnikom palic MBL 42. Dolžina struženja: 400 mm, premer struženja: 420 mm, prehod palice: 60 mm, hitrost vrtenja: 6000 o/min, dimenzije stroja X/Y: 4750 mm/1950 mm. Dokumentacija je na voljo. Ogled na lokaciji je možen. Fpedpfx Apoym Dgmoleg

Stanje: rabljeno, Leto izdelave: 2003, Drehdurchmesser 190 mm Drehlänge 620 mm Steuerung Fanuc Series 18i-TB Gesamtleistungsbedarf 15 kW Maschinengewicht ca. 13,5 t Raumbedarf ca. 5350X3350x2395 m CNC Dreh- und Fräszentrum NAKAMURA TOME Super NTJ Baujahr 2003 Steuerung Fanuc Series 18i-TB - Hauptspindel muss überholt werden. - Oberer Revolver ist mit einer G42 Turbo- Luftangetriebenen Spindel 60000 U/min und Steuergerät GTR 3 nachgerüstet. Anzahl der Achsen: 9 Anzahl der Revolver: 2 Max. Drehdurchmesser: 190 mm Max. Drehlänge: 620 mm Stangendurchlass: bis zu 65 mm Umlaufdurchmesser über Bett: 190 mm Anzahl: 2 (Haupt- und Gegenspindel) Spindelnase: A2-6 Antriebsleistung: 15 kW Fsdpfxjxiy Auj Aplopg Max. Drehzahl: 60000 U/min X-Achse: 345 mm Y-Achse: +/- 45 mm Z-Achse: 1240 mm B-Achse: +/- 91° oben voll Servogesteuert 0,001° Stangendurchlass: D 65 mm - 12-fach Revolver für angetriebene Werkzeuge - 24-fach Revolver für Drehwerkzeuge (Doppelhaltertechnik) - mit viel Zubehören - 2 x HB-Futter Hainbuch

Leto izdelave: 1995, stanje: pripravljen za uporabo (rabljen), Maximum spindle speed: 5,000 rpm, bar capacity: 65 mm, maximum turning diameter: 200 mm, maximum turning length: 400 mm. Number of spindles: 2, tool changers: 2 x 14, Siemens control system. Includes discharge conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), control cabinet with cooling unit, CO2 extinguishing system, and INDEX bar loader. Completely overhauled in 2016. Fpodpjtdwwmefx Aplsg

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Max. turning diameter: 200 mm, max. turning length: 400 mm, spindle speed: 6,000 rpm, bar capacity: 42 mm, weight: approx. 4,300 kg. Fodpfetdwwqsx Apljpg

Stanje: dober (rabljeno), Leto izdelave: 2007, Deli, ki so prikazane na fotografijah z roko, niso vključene. Tehnični podatki so prikazani na sliki. Fpodpferpn Dvsx Aplog

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Na voljo je popolnoma avtonomen CNC dvo-vretenast stružni stroj Index. Premer struženja: 220 mm, odprtina glavnega vretena: 65 mm, premer glavne vpenjalne glave: 210 mm, odprtina nasprotnega vretena: 60 mm, premer nasprotne vpenjalne glave: 210 mm, orodjna mesta: 12, gib Y: 120 mm, razpon premera prijemala: 4 mm-45 mm / 40 mm-65 mm, tlak črpalke za hladilno sredstvo: 8 bar, zmogljivost visokotlačne črpalke: 80 bar, izmetna višina transporterja odrezkov: 1250 mm. Dimenzije celotne naprave (X/Y/Z): ca. 9150 mm/4350 mm/2000 mm, teža: ca. 10.500 kg, delovni čas: ca. 92.000 h. Vključno z nalagalnikom FMB turbo 8-80 XT/3200A, avtomatskim sistemom za nalaganje in razlaganje alphaMAX s 6 osmi, transporterjem odrezkov, napravo za hladilno sredstvo, visokotlačno črpalko in rezervnimi deli. Delovanje s samodejnim dovodno-odvodnim sistemom je predvideno za premer plošče od 80 mm do 220 mm. Gre za popolnoma avtomatiziran sistem brez operaterja. Dokumentacija je na voljo. Ogled na lokaciji je možen. Predvidoma na voljo od junija 2026. Fpsdpfx Apoyfv Nkeleg