Vodoravni stroj za struženje

Index C100

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 10 - Number of turrets: 3 MAIN SPINDLE - Spindle nose: A2-5 Godpsu Uu H Rjfx Ab Tokf - Spindle drive power: 22/29 [kW] - Spindle speed: 7,000 [rpm] - Max. bar capacity: 42 [mm] - Max. main spindle chuck diameter: 110 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 16.5/19 [kW] - Spindle speed: 7,000 [rpm] - Max. bar capacity: 42 [mm] * Max. main spindle chuck diameter: 110 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel distance: 500 [mm] - Rapid traverse speed: 60,000 [mm/min] - Distance spindle/sub spindle: 515 [mm] LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel range X/Z: 70 / 250 [mm] - Travel range Y: 70 [mm] - Tool type: VDI 25 - Driven tool speed: 8,000 [rpm] - Driven tool power: 4.2 [kW] RIGHT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel range X: 125 [mm] - Tool type: VDI 25 - Driven tool speed: 8,000 [rpm] - Driven tool power: 4.2 [kW] LEFT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel range X/Z: 70 / 400 [mm] - Travel range Y: 70 [mm] - Tool type: VDI 25 - Driven tool speed: 8,000 [rpm] - Driven tool power: 4.2 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 68 [kVA] WEIGHT AND DIMENSIONS - Required floor space: 5540 x 2910 [mm] - Machine weight: 5,500 [kg] MACHINE HOURS - Spindle hours: 25,000 [operating hours] EQUIPMENT - CNC control: INDEX C200-4D (based on Siemens) - 3-color status lamp - Coolant tank * with high-pressure pump: 20 [bar] * with paper filter * with rinsing gun * internal coolant supply (ICS): main and secondary - Chip conveyor: RIGHT - Spindle cooling - Parts catcher - Bar feeder: IEMCA BOSS 545 E - Driven tool holders: 6 - Static tool holders: 24

Stanje: rabljeno, Leto izdelave: 2007, Swing diameter 140 mm Turning length 615 mm Control C200-4D Spindle bore 65 mm Spindle speed 5,000 rpm Torque at 40% / 100% duty cycle: 145 / 105 kW Turret slides 1, 2 and 3 X-axis travel 110 mm Z-axis travel 360 mm Y-axis travel 70 mm Rapid traverse X/Y/Z: 25/12/45 m/min Slide travel X-direction 150 mm Slide travel Z-direction 600 mm Spindle speed 5,000 rpm B-axis, B-correction axis +/- 1° Tool turret – number of stations: 3 x 12 Tool holder DIN 69880 VDI 25 x 48 C-axis 0.001° Total connected load 61 kW Machine weight approx. 6.5 t Space requirement approx. 9.75 x 3.10 x 2.85 m Loading: Multi-channel bar feeder Breuning Profimat 65.8x270/8, year 2005 for bars with length from 500–3,000 mm, 8 guide channels with spindle liner tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: Workpiece unloading system BREUNING ILS-REX-7208, year 2007 Gsdpfx Aewzynqjb Tekf

Leto izdelave: 2016, Stanje: skoraj kot novo (rabljeno), Offered is a vertical turning and grinding center VLC 100 GT, retrofitted in 2022. With the pick-up spindle unit, workpieces can be fed directly from the side-mounted conveyor belt into the working area. Thanks to its modular design, the VLC 100 can be configured for a wide range of applications. The images show, for example, a combination of turning tools (block tool holders) and grinding spindles for soft or hard machining (internal, external). Depending on the workpiece or machining technology, these machining modules can easily be adapted. CONTROL Siemens 840Dsl TECHNICAL DATA Max. workpiece diameter: 100 mm Max. workpiece height: 150 mm X-axis travel: 605 mm Z-axis travel: 530 mm PERFORMANCE Main spindle: 18 kW Grinding spindle: 12 kW TOOL HOLDER 2x block tool holders VDI / Capto Console with grinding spindle 12 kW, 60,000 rpm Price, delivery time, and machine specifications upon request. Gkodpfxoh Tm Duo Ab Tof

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, leto zadnje generalne obnove: 2023, ATTENTION: THIS MACHINE AT A ONE-TIME SPECIAL PRICE. Gksdpfx Aotpu Szjb Tsf General Description: Year of manufacture: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical Data: Control system: Fanuc 21i-T Swing diameter: approx. 210 mm Maximum speed: 6,500 rpm Turret: VDI 40 mm, 12 stations The machine does not have any live tooling. Hinged belt chip conveyor Spindle mount: Size 5 Conveyor belt for finished parts Machine weight: approx. 5.5 t The following work was carried out as part of the machine’s overhaul in 2023: -The machine was completely disassembled, cleaned, and repainted -The main spindle was newly mounted -The guides and guide shoes on X and Z axes were replaced -The ball screw spindle on the X and Z axes was replaced -New unit for central lubrication with new hoses -The hydraulic unit was checked and serviced. The drive coupling between motor and pump was replaced -The cooling unit was checked and serviced: Temperature differential controller was replaced -The clamping cylinder was re-bedded and re-sealed -The gearbox on the A-axis was newly mounted, and the coupling between motor and gearbox was replaced -Electrical cabinet was cleaned -Operator panel was replaced -New monitor -New internal lighting -Turret was disassembled, wear parts checked, cleaned, and re-sealed -Turret encoder and encoder wheel cleaned -Linear measuring systems in X and Z axes disassembled and cleaned -Springs at the pick-up station replaced -Motors for X and Z axes checked for bearing damage -Windows on work door replaced -Chip conveyor completely disassembled, newly mounted, cleaned, and repainted -Of course, various small parts were also replaced on the machine The product has been described by us with the utmost care. The description is non-binding and should be verified during inspection.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 1 MAIN SPINDLE - Spindle nose: ISO 702/1-8 - Spindle drive power: 60 [kW] - Spindle speed: 3,500 [rpm] - Max. bar capacity: 102 [mm] - Max. turning diameter over bed: 560 [mm] - Max. main chuck diameter: 315 [mm] - Minimum C-axis resolution: 0.001 [degrees] TAILSTOCK - Tailstock type: Numérique - Taper type: ISO 30 - Distance between centers: 1,400 [mm] - Adjustable pressure: via power monitoring TURNING-MILLING SPINDLE - Travel X/Z: 300 x 1,840 [mm] - Travel Y: 286 [mm] - B-axis stroke: 360 [degrees] - Minimum B-axis resolution: 0.001 [degrees] - Tool type: HSK63 - Spindle speed: 12,000 [rpm] - Spindle drive power: 27.5 [kW] TOOL CHANGER - Tool changer type: Parapluie - Number of magazine tools: 2 x 40 ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power rating: 100 [kVA] WEIGHT AND DIMENSIONS - Footprint: 5,460 x 2,560 [mm] - Machine height: 3,000 [mm] - Machine weight: 13,500 [kg] MACHINE HOURS - Power-on hours: 37,800 [h] - Turning-milling spindle hours: 7,891 [h] - Spindle hours: 9,137 [h] EQUIPMENT - Control: C200-4D (SIEMENS 840D Powerline) - Interface: RS232 / RJ45 - Coolant tank: 900 [l] * with high-pressure pump: 25 [bar] * with paper filter - Through-spindle coolant supply (IKZ) - Chip conveyor: KNOLL - Oil mist extraction: BÜCHEL SH2000 PEV - Spindle coolant - Steady rest: SMW SLU3 Ø12-152, CNC positioned - 3-jaw chuck: SMW KNCS-N-315-91 - Number of milling tool holders: 72 Gkjdouhalxopfx Ab Tof - Number of turning tool holders: 12

Stanje: rabljeno, Description: Gkedpfxewkcldj Ab Tof General: Year of manufacture: 2008 Control: Fanuc 18i-TB Turning diameter: 130 mm Turning length: 110 mm Swing diameter: 200 mm Max. workpiece height: 110 mm Spindle: Technology: Motor spindle Speed: 7,500 rpm Power: 24 kW Torque: 158 Nm C-axis: 0.001° Clamping cylinder: Full clamping cylinder Tool turret (X/Z): Technology: Star turret Number of stations: 12 positions Tool holder: VDI 40 Tool drive: 6,000 rpm, 40 Nm X-axis travel: 400 mm Z-axis travel: 200 mm Equipment / Accessories: Position measuring systems: Direct (glass scales) Chip disposal: Chip conveyor Coolant supply: High-pressure pump Automation: Peripheral workpiece storage Emulsion mist extraction: Mechanically pre-installed

Stanje: nepreverjeno (rabljeno), Rotary Transfer Center RT100-12-14 Manufacturer: Pfiffner Serial number: 08/116 Godpfxsi Ewnpj Ab Tokf Operating hours: 51,068 Floor space approx. 14m x 8m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Krmiljenje Fanuc 18 iTB Gkodpew Rdcpofx Ab Tof Premer vrtenja 210 mm, X-/Z-hod 400/200 mm, Hitrost vrtenja 7500 1/min, 12-pozicijska revolverska glava z gnanimi orodji. Krožni transportni trak, 3-čeljustna vpenjalna glava Transporter ostružkov

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 750 mm, največja hitrost vretena: 6.720 obr/min, premer vrtanja: 20 mm, pomik vretena: 1.450 mm, razdalja med središči: 120 mm, TECHNICAL DETAILS Number of spindles: 4 Gedpfewm Ebyjx Ab Tskf Spindle spacing: 120 mm Spindle drive: 4 × 4 kW Spindle speed: 672 – 6,720 rpm Spindle stroke: 1,450 mm Drilling diameter: 4 – 20 mm Drilling depth: 750 mm EQUIPMENT - Chip conveyor - Air cooler - Filtration unit - Circulating conveyor with workpiece carriers